Permanently Closed Marketplace Sales Thread
- Thread starter CloneX
- Start date
- Status
You say the licence is for two PC that mean if i take a vps and i install the soft inside and i instal the soft on my personal pc if two month later i change of isp so i got another vps (i don't use the old anymore) i have no need to pay 5$ for the new vps right ?
chungy90
Junior Member
- May 2, 2012
- 188
- 77
Just did a trial to get familiar to this software and I find it very nice. It looks simple, but holds a lot of feature, just the same feeling as Scrapebox (simple interface, but lots of features).
Too bad I just notice recently this software, else I would of bought it earlier. Good thing I had some fund sleeping in Paypal, might as well invest into this one-time fee software, get to learn it.
Chungy
Too bad I just notice recently this software, else I would of bought it earlier. Good thing I had some fund sleeping in Paypal, might as well invest into this one-time fee software, get to learn it.
Chungy
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
Just give the links a list name when you add them, then search for the list name in the list of sites then click select all. That will allow you to select only sites in the particular list for submission.
Yes you don't have to. We allow users to perform license transfer free of charge once every month.
Thanks for purchasing! This could be one of the best investments you make this year.
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
SamTheMan26
Junior Member
- Jul 14, 2011
- 179
- 19
Is there a way to add let's say 5k0 to 100k scraped urls into the link analyzer, then let it check each URL, add the ones that it can post to to the database and blacklist the ones it is not capable of posting to?
The same question goes for the build in site list. Let's say I have tried 4 times to create accounts on all sites that come with the built in site list and now I want to delete and blacklist all sites with a success rate below 25% - is that possible? And if yes how. And with blacklisting I mean add the sites to a blacklist and each time I try to add the same site to the database it checks the blacklist first. If it finds it in the blacklist it will not add the URL to the database, if it does not find it in the blacklist it adds it.
Looking forward to your answer.
The same question goes for the build in site list. Let's say I have tried 4 times to create accounts on all sites that come with the built in site list and now I want to delete and blacklist all sites with a success rate below 25% - is that possible? And if yes how. And with blacklisting I mean add the sites to a blacklist and each time I try to add the same site to the database it checks the blacklist first. If it finds it in the blacklist it will not add the URL to the database, if it does not find it in the blacklist it adds it.
Looking forward to your answer.
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
Yes it is possible to do that. We have fixed most of the crashing issues concerning adding sites in large quantity, so feel free to add them without worries. Remember to give the list a name (where you will be asked for in the Add Sites window) so you can identify and submit to them later.
To blacklist sites with low health, go to Site Manager -> Tick the checkbox "Select sites with registration/submission health below x%" then click Blacklist selected sites.
Every time you add sites into LAIO, it will check against the blacklist first. If the particular site has already been blacklisted, it will show "Site already exist in database" and will not add the site. This is also why we suggest users to blacklist sites instead of simply deleting them - so you don't add bad performing sites over and over again.
webmasterbd
Elite Member
- Dec 2, 2009
- 5,393
- 3,004
I tried the new xp version but its not working ,please help me.
,please help me.
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
I tried the new xp version but its not working
Did a teamview session and have resolved his issue. We will be releasing the windows xp update tomorrow if we do not receive further issue reports from the testers within 12 hours.
I would love if you could add some kind of play/pause function in the link analyzer module as sometime it takes alot of time and i'd like to pause it. Not sure if im the only one.
I'm still have issues with Big list in the site manager i'm avalaible for Team viewer anytime.
I'm still have issues with Big list in the site manager i'm avalaible for Team viewer anytime.
Last edited:
SamTheMan26
Junior Member
- Jul 14, 2011
- 179
- 19
1. Can you explain how I select all wikis with a registration success below 100% in the manage sites module? I cannot get it to work. When I click "select sites under category Wiki" it selects all wikis, but how can I deselect all wikis with a success (registration) below 100% because if I just add a tick in the checkbox "select sites with health registration below 100%" it also selects sites with success (registration) below 100% of all other plattforms.
For 1. and 2. basically why is the site manage selection filter section not an AND operation. This way if I want wikis I check select under category wiki and when I select sites with pr under 1 it would select all wikis with a PR below 1. As simple as that.
EDIT: Ok I found out that we have to click "show selected" after each setting in the top menu bar.
2. Or how can I select all sites that I added under a specific list name in the manage sites module?
3. And why can I not just highlight all sites and right click "select highlighted"? This would be awesome to test just the PR of specific sites that we want to test for PR.
Help is appreciated.
For 1. and 2. basically why is the site manage selection filter section not an AND operation. This way if I want wikis I check select under category wiki and when I select sites with pr under 1 it would select all wikis with a PR below 1. As simple as that.
EDIT: Ok I found out that we have to click "show selected" after each setting in the top menu bar.
2. Or how can I select all sites that I added under a specific list name in the manage sites module?
3. And why can I not just highlight all sites and right click "select highlighted"? This would be awesome to test just the PR of specific sites that we want to test for PR.
Help is appreciated.
Last edited:
It's easy, search " name of the list " in " List Name ".
When it's done you do can can manage what you want in this list, this will do the same as an " AND " operation.
It's really logical with more than 30 sec research...
Last edited:
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
2. As what thomtin has stated, all you need to do is to search for the list name then click Select All.
3. You will see this in the next update.
v3.021 IS OUT!
General
-Reintroduced windows XP support
--Windows XP users please download .NET Framework 4.0 AND also this update http://www.microsoft.com/en-us/download/details.aspx?id=3556
--.NET Framework requirement has been changed from 4.5 to 4.0
-Fixed issue with updater keeps prompting for update for users using foreign locale
Submission Method
-Total and daily successful submission count is now editable in textbox
Sites related
-Site Manager PR checker now supports proxy (only in ip: port format)
-Added the ability to select sites by list name
Scraper
-Fixed issue with scrape limit not updated when user changes specifies a scrape limit then set back to "No Limit"
-Added the option to show only results from unique domains
GUI
-Searching sites now shows progress circle and will not cause UI to be unresponsive
Updater
-Now automatically detects corrupted database and prompt user to download a new one from server
Misc
-Fixed issue with account profile creation allowing empty subdomain
SamTheMan26
Junior Member
- Jul 14, 2011
- 179
- 19
Where can I set how many retries a site gets during account creation?
Sites related
-Site Manager PR checker now supports proxy (only in ip: port format)
And what does that mean - can I no longer use iport:usernameassword for private proxies and where do I have to add private proxies so that LAIO uses them for PR checks in the site manager?
Sites related
-Site Manager PR checker now supports proxy (only in ip: port format)
And what does that mean - can I no longer use ip
ort:usernameassword for private proxies and where do I have to add private proxies so that LAIO uses them for PR checks in the site manager?
MatthewWoodward
Senior Member
- Aug 31, 2012
- 997
- 1,728
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
Where can I set how many retries a site gets during account creation?
Sites related
-Site Manager PR checker now supports proxy (only in ip: port format)
And what does that mean - can I no longer use ip
You can adjust retry failed settings in the settings window under General.
The ip: port format is only for PR checker. You can still use ip: port:username: pass format for the proxies in submitter.
I will shoot you a PM.
webmasterbd
Elite Member
- Dec 2, 2009
- 5,393
- 3,004
Ok with the new updates there's some major problem with web 2.0 properties posting,everytime i signed up to those web 2.0 properites & then confirm emails.When I go to article submission task but after adding my article when i go to select my signed up accounts under the email.Even though it shows account been signed up successfully with their respective email/user name & password,when i try to select them nothing happens.No matter what I do I cant seem to select those account I signed up already for the posting.tried few times now & I did email verification several times but so far no success. Point to be noted here the previous version has no problem like that.Please look into it asap & help me resolve this issue.Thanks
- Status