Permanently Closed Marketplace Sales Thread

[naskootbg]

2) Tier 1 should work with any keyword for which you get atleast 200 articles either from database or by scraping. Unfortunately i do not have the categories scraped and providing categories related content might be a good opinion. But oh lord the database changes will be immense and it might even slow down the whole process. I will see if i can make it easier by re-scraping or somehow getting categories added to it. Also category will not work with scraping articles as not all directories provide categories.

I know adding the categories while scrapping from EZA will be HUGE task lol - this will means to scrap again from the beginning. My idea is just to provide catalog with the categories, so they can be used as keywords for scrap with one click - EZA categories (and sub categories) are nothing, but general niches. Many of us (at least me thinks like that "what commercial keyword I must use so the articles will be relevant to my keyword and will get enough big number of articles" - the catalog with the categories will helps with this task. I use adwords keyword tool for finding relevant keyword with most searches to be sure, that WAC will find enough number articles.

 

[jamesvick]

I know adding the categories while scrapping from EZA will be HUGE task lol - this will means to scrap again from the beginning. My idea is just to provide catalog with the categories, so they can be used as keywords for scrap with one click - EZA categories (and sub categories) are nothing, but general niches. Many of us (at least me thinks like that "what commercial keyword I must use so the articles will be relevant to my keyword and will get enough big number of articles" - the catalog with the categories will helps with this task. I use adwords keyword tool for finding relevant keyword with most searches to be sure, that WAC will find enough number articles.

lol that is a big question . It's funny how i think everyone just adds a keyword and downloads content and never thought that people would actually like niche relevant content more than keyword relevant content.

No problems though. I will setup everything on a new scraper and start working immediately. Plus this time i can also build a new method to make sure no duplication occurs based on the article id provided by ezine.

Regards,

 

[Hubba]

4) Yup it does happen with less than 200 articles. Also adult content is a big red flag. Did this happen on database content or scraping? I might add a list of bad words and check all downloaded articles for them before adding it to the grid. Hubba please let me know if it was by scraping or wac database.



Regards,

It was using the WAC database.

 

[thomtin]

So.. what's the state of this software right now ? I haven't read anything yet in this topic as i saw many people talking about it everywhere here but why do you people talk about Beta and stuff ? the software isn't finished yet ?

 

[orloxgr]

lol that is a big question . It's funny how i think everyone just adds a keyword and downloads content and never thought that people would actually like niche relevant content more than keyword relevant content.

No problems though. I will setup everything on a new scraper and start working immediately. Plus this time i can also build a new method to make sure no duplication occurs based on the article id provided by ezine.

Regards,

I am on 2.8.7. I research "athens escorts" without the quotes and the articles it finds with keywords are 1-3 sometimes none. If i "add lines" and autobuilt articles i get the error message "You have less lines than your settings. Please add more" which isn't very helpful.
I also get an error message after search completion

Spoiler

The following URLs had a problem :
url1
url2
url3
urlX
urlX
urlX
urlX
urlX
google
google
google
google
urlx1

In future you will be allowed to retry these failed URLs.

I have dedicated proxies.

 

[jamesvick]

It was using the WAC database.

Alright beta 3 will have the full bad words list added to scraper.

So.. what's the state of this software right now ? I haven't read anything yet in this topic as i saw many people talking about it everywhere here but why do you people talk about Beta and stuff ? the software isn't finished yet ?

The beta is for 3.0. Current version is 2.87 and it works. It's just that the software is being upgraded to a higher version and i am providing beta for people to test it.

I am on 2.8.7. I research "athens escorts" without the quotes and the articles it finds with keywords are 1-3 sometimes none. If i "add lines" and autobuilt articles i get the error message "You have less lines than your settings. Please add more" which isn't very helpful.
I also get an error message after search completion

Spoiler

The following URLs had a problem :
url1
url2
url3
urlX
urlX
urlX
urlX
urlX
google
google
google
google
urlx1

In future you will be allowed to retry these failed URLs.

I have dedicated proxies.

Hi,

That error comes when there are very less articles. I got only 2 articles with it so it means the keyword is very very narrow. What you can do is go for only escorts or some place broader like us escorts and then replace us by athens. Look at it this way not many people will write articles about this topic so not many articles will be out there to scrape. Sometimes you need adjustments to work with places or name things which are very narrow.

Also that error list shows which urls failed to provide content. I mean some can be videos, news etc. etc. and these urls did not have any article content.

Regards,

 

[geomuss]

Ok bought this, are there any good tuts on how to use ? especially with 3.02b
anything appreciated

 

[jgf213]

Hey, I had to reset my laptop so now I have to re-install all my programs. I installed WAC but when I enter the login info I keep getting no such user found. I contacted support yesterday and still no response. Can you help me with this?

 

[jamesvick]

Ok bought this, are there any good tuts on how to use ? especially with 3.02b
anything appreciated

Hi,

Sorry but new videos will be made after 3.0 is released. I will be releasing final beta 3 with some more changes and then it will be out.

Hey, I had to reset my laptop so now I have to re-install all my programs. I installed WAC but when I enter the login info I keep getting no such user found. I contacted support yesterday and still no response. Can you help me with this?

Hi,

I am sorry but i do not see any email for license error. Please resend? Also pm me your username. Most probably your pasword needs a change. Nothing else.

Regards,

 

[bigdaddycool]

What keywords are you guys using to get readable Tier1 content? The keywords I try that have over 200 sources are so broad that the content isn't nearly Tier1.

 

[jgf213]

pm'd you

 

[jamesvick]

What keywords are you guys using to get readable Tier1 content? The keywords I try that have over 200 sources are so broad that the content isn't nearly Tier1.

Hi,

The logic to make tier 1 works on base 200 articles but will be changed to 100 or even lesser than that. It's just that more articles make sure you get more uniqueness. Readability should not be a problem but uniqueness can be. Increasing number of articles means increasing number of chances of uniqueness. So i will add options for user to change that.

Also by ins't nearly tier 1 do you mean readability is poor? Let me know keywords and i will help you out.

pm'd you

Looks like it's sorted

Regards All,

 

[jgf213]

First of thanks for the help,vin the next update can you add the ability to minimize the windows that pop up when you create the content for gsa, ud, ms, etc. It is not a big issue but I have having to click to show desktop just to minimize the window.

Also for some reason when I use proxies it is not scraping as many articles as when I don't use proxies, why is that? I only got like 4 articles with and 300 without.

 

[jgf213]

Also for some reason it does not always generate the keywords and anchor text with or without proxies. I just ran it once and everything ran fine then it stopped generating kewords and anchor text. Why does this happen?

Note: The proxies are fully dedicated from buyproxies.org which is the one WAC offers.

 

[jamesvick]

First of thanks for the help,vin the next update can you add the ability to minimize the windows that pop up when you create the content for gsa, ud, ms, etc. It is not a big issue but I have having to click to show desktop just to minimize the window.

Also for some reason when I use proxies it is not scraping as many articles as when I don't use proxies, why is that? I only got like 4 articles with and 300 without.

Also for some reason it does not always generate the keywords and anchor text with or without proxies. I just ran it once and everything ran fine then it stopped generating kewords and anchor text. Why does this happen?

Note: The proxies are fully dedicated from buyproxies.org which is the one WAC offers.

Hi,

the first problem is because most of the article directories are high traffic ones and know about so many scraper sites. Forget about WAC scraping has been around for like a decade now. Most of the sites like EZA and goarticles already know about dedicated proxies etc. and ban them. If you read few posts back people said that WAC burns 50 dedicated proxies too. I have tried simple test :

1) Yahoo voices - Ban after 3 scrapes
2) EZA - Ban after 3 scrapes
3) Goarticles - Ban after 5 scrapes
4) a1articles - Ban after 4 scrapes

Rest are under same category. Also note that at any time we get over 20-50 articles for each keyword from any directory. Hence dedicated or shared proxies never suffice WAC. I am beta testing a user recommended service of proxies. It is a software which gets proxies from multiple cloud servers. If it works then golden. Any point you will have 400-500+ proxies to work with and i will make a direct integration with it too. Also it will save you monthly costs as i guess it is one time.

As for second question it is a bug. sometimes google returns some xml code which has been fixed in 3.0 beta 3. I will let you know about it here only.

Regards,

 

[mogs03]

Hey James,

I encountered some problem with WAC. Whenever I hit the "auto build" (I always got an error saying Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: Index). I changed the setting into default, still got the same error.

 

[jgf213]

Hey James,

I encountered some problem with WAC. Whenever I hit the "auto build" (I always got an error saying Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: Index). I changed the setting into default, still got the same error.

I got the same error.

 

[NadieComoPeter]

Exist one guide step for step?, im buy WAC today but is hard work (Im newbie)

 

[senuke]

Hi James,
i am very impressed about WAC video.
My question is can i build articles in other languages than english?
I am very interested in french and german.

Thanks for your reply

Michael

 

[troofer]

Hi

what happened to the autobuild for GSA projects? doesn't build the whole project, just some articles. can't import anything else.