Permanently Closed Marketplace Sales Thread

[Toz]

Do you absolutely NEED to load a text document to be able to spin? I've been searching the software, but I cannot seem to locate a method for direct spinning through the program, without needing to load a txt document. Sometimes I just find things on the internet I'd like to spin, without the hassle of making a txt document and saving/loading it. I'm big on time-management.. In either case, I'm about to purchase my license. Cheers!

EDIT: Just purchased my license!!!

 

[licorne101]

Do you absolutely NEED to load a text document to be able to spin? I've been searching the software, but I cannot seem to locate a method for direct spinning through the program, without needing to load a txt document. Sometimes I just find things on the internet I'd like to spin, without the hassle of making a txt document and saving/loading it. I'm big on time-management.. In either case, I'm about to purchase my license. Cheers!

EDIT: Just purchased my license!!!

Congratulations on your purchase!

You are not required to load a text document to be able to spin. You can just paste the content you want to spin into the Editor which can be found in any submission task then click on the spin button to spin the content.

is the campaigner the top priority for the next update? hopefully you guys just switch to monthly to grab some more monies and funds to program stuff like campaigner/auto update within the next week or so, that way it'd really separate you guys, since senuke is good to use but expensive (and downright the cost of licorne with 1 month service) but the campaigner just makes it easy mode for all (even tho you shouldn't rely on the campaigner for senuke, it's still nice to see/use and visualize) the only other one is the horrible campaigner from magic submitter (unless they updated it, it was bad a few months ago) and a not released program that i'm sure will make waves here soon when it get's released.
so i wouldn't mind
1.campaigner
2. auto update
3. monthly (of course it's not fair for me to say this since i already have a license).
all next week please!

Yes the diagram designer is the top priority for our next update and we are planning to make it very similar to the one in SENuke. You will definitely be seeing it in the next update as promised. As for auto update we can't confirm on that yet, but we will also try to make it available in the next update.

I just purchased a faster VPS to accommodate my growing campaigns and utilize more of Licorne's power (Setting up/duplicating tasks is so easy and fast). Is it possible for me to transfer my license over to it without having to pay the fee?

Yes everything will be done FOC, and I have replied your email.

Can you speak towards your roadmap releases? Since you're currently in beta, do you forsee when you'll be out of beta?

There is no fixed date as to when we will be out of beta, we will end the beta phase when we (and the users) think LAIO is stable enough to run aggressively without a hitch.

We plan to release diagram designer module hopefully by the end of February or latest by early March with a lot other features/bug fixes suggested by our users. After we have rolled out diagram designer module, we will begin working on improving our Licorne Cosmic module.

 

[marcus.watts]

I am currently training it for a new platform. I have managed to fit all the fields. But how about captchas? I don't see that option anywhere.

 

[Toz]

Can anyone recommend a quick, reliable Windows VPS (that's not too expensive) that I can install this on? All ill have on the VPS is Licorne. This is going to become my little toy that I will master! It's just so darn cute!

 

[MikeBuyco]

I've tested the trial. It's awesome. Do you think can add bulk urls blacklist option as I don't want to build backlinks to non indexed sites.

 

[licorne101]

I've tested the trial. It's awesome. Do you think can add bulk urls blacklist option as I don't want to build backlinks to non indexed sites.

You can bulk blacklist sites by going to Site Manager then add the sites you want to blacklist under "Bulk select sites under domain" and select them then click Send to Blacklist.

Can anyone recommend a quick, reliable Windows VPS (that's not too expensive) that I can install this on? All ill have on the VPS is Licorne. This is going to become my little toy that I will master! It's just so darn cute!

Glad that you are liking it! Xsserver VPS should work well with LAIO but I had a really bad experience with their support and delay in getting my VPS setup.

I am currently training it for a new platform. I have managed to fit all the fields. But how about captchas? I don't see that option anywhere.

If the page has a captcha but LC shows "Captcha is not detected" at the bottom right of the window, you will have to teach it to recognize the captcha. If it can be detected by LC then you can automate/script the sites and ignore the captcha as though as it does not exist because they will be handled automatically by the system.

 

[webmasterbd]

I been using licroni aio for a while now & it is a very good tool to have under your link building arsenal.But there are few thing i would like to improve in there such as ability to change or transfer license once or twice a month like scrapebox without asking customer support everytime,adding micro recorder like senuke xcr,decrease the unsuccessful rate for web 2.0 properties,article directory submission module make it working currently it doesn't give you a single live link when you post with that module,ability to add more customized websites on all module,hope you will look into it & make the improvement as necessary as you go along . Also i have a question,why this software is not running on windows 8?

 

[licorne101]

I been using licroni aio for a while now & it is a very good tool to have under your link building arsenal.But there are few thing i would like to improve in there such as ability to change or transfer license once or twice a month like scrapebox without asking customer support everytime,adding micro recorder like senuke xcr,decrease the unsuccessful rate for web 2.0 properties,article directory submission module make it working currently it doesn't give you a single live link when you post with that module,ability to add more customized websites on all module,hope you will look into it & make the improvement as necessary as you go along . Also i have a question,why this software is not running on windows 8?

Thanks for the great feedback and suggestions! I have noted all of them down and we will begin working on most of them after the major update.

I think the reason for your LAIO to not work on your windows 8 OS is that you did not have .NET Framework 3.5 installed. Here's the download link for it: http://www.microsoft.com/en-us/download/details.aspx?id=21.

 

[webmasterbd]

Thanks for your prompt reply & when the major update will be rolled out.Also what will you have on this new update?

 

[licorne101]

Thanks for your prompt reply & when the major update will be rolled out.Also what will you have on this new update?

The next update will include the much anticipated diagram designer feature and also a few worth mentioning ones like:
-The ability to export/import diagram templates
-The ability to schedule submission to start at later date or after a particular task has completed
-Contextual linking (automatically transforms keywords in an article into hyperlink)
-Placeholder to use live links from parent task

 

[KennChi]

Are you planning to integrate GSA CB?

 

[licorne101]

Are you planning to integrate GSA CB?

We already have GSA CB integrated as of v2.52.

 

[traged]

Hi,

I have tested the pligg module right now and the successful rate is very low. I have added my own sites that i scraped with Scrapebox and i have used Captcha sniper only. Out of 1057 identified sites, i created only 101 acounts and out of that, i got only 11 live links.

When i tried exactly the same list with GSA SER (with Captcha sniper as well), i got around 140 live links!

I think the main difference is that in LAIO, i am not able to set number of attempts for CaptchaSniper to solve the captcha. I know most of pligg sites uses re-captcha, but lots of them dont and these should be working for me. In GSA, i set it to 3 attempts and almost all non-recaptchas are solved. Other reason might be that for some sites (like w3promoter.com), you need to answer a simple question (like what is 3 + 1) to be able to post. GSA is able to detect such question and asks you for manual input (and i think they are working on some automated way to solve such questions).

Could you implement this in LAIO?
thx

 

[StickyGreen]

Is it necessary to have a VPS if you are using private proxies?

 

[licorne101]

Hi,

I have tested the pligg module right now and the successful rate is very low. I have added my own sites that i scraped with Scrapebox and i have used Captcha sniper only. Out of 1057 identified sites, i created only 101 acounts and out of that, i got only 11 live links.

When i tried exactly the same list with GSA SER (with Captcha sniper as well), i got around 140 live links!

I think the main difference is that in LAIO, i am not able to set number of attempts for CaptchaSniper to solve the captcha. I know most of pligg sites uses re-captcha, but lots of them dont and these should be working for me. In GSA, i set it to 3 attempts and almost all non-recaptchas are solved. Other reason might be that for some sites (like w3promoter.com), you need to answer a simple question (like what is 3 + 1) to be able to post. GSA is able to detect such question and asks you for manual input (and i think they are working on some automated way to solve such questions).

Could you implement this in LAIO?
thx

LAIO does not have an option to set number of attempts for CS but you can adjust submission retry failed to achieve something similar. Just make sure you do not have paid captcha service enabled else it will cost you a bomb for the captchas.

Can you send us the list of 1k+ identified sites and also the list of 140 live links you got using GSA SER in separate files? Using the list we will try to see what we can do to improve the success rates.

Is it necessary to have a VPS if you are using private proxies?

It is not necessary to own a VPS, you are free to run LAIO on your own PC if bandwidth uses, connection speed and also electricity bills aren't a major concern to you.

 

[patomica]

How unique is it if i spinned a scraped article from the licorne article spinner?.. like for example is it 70%?

 

[honkyinhongkong]

After much debate about which seo tool to invest in I have just purchased Licorne. I felt that the one time payment and low pricetag were excellent. I thought that since Licorne is one of the newer kids on the block the links produced and the platforms targeted would be less saturated than some of the bigger tools. Dual installation was also important to me so that i can have a copy on my personal pc and also put a copy on a VPS when i am ready to graduate to that level. The proxy list server kind of put it over the top for me as again i can actually use the software for now as i am learning without the ongoing cost of private proxies or a proxy list service.

on a side note holy crap it takes paypal 5 days to clear an e-check wow! the efficiency!

I guess i am off to start my trial !

P.S. why no sound on the training videos? Talk through the walk through might be nice!

 

[licorne101]

How unique is it if i spinned a scraped article from the licorne article spinner?.. like for example is it 70%?

The uniqueness produced from our spinner will not get you anything near 70% uniqueness and is not even close to human-readable so you should always avoid using them for tier 1. In fact, it is never a good practice to use autospun content for tier 1 (using them for tier 2 onwards is fine though). If you want a higher quality yet free autospun article spinning service, I'd suggest you to give SpinnerChief a try.

After much debate about which seo tool to invest in I have just purchased Licorne. I felt that the one time payment and low pricetag were excellent. I thought that since Licorne is one of the newer kids on the block the links produced and the platforms targeted would be less saturated than some of the bigger tools. Dual installation was also important to me so that i can have a copy on my personal pc and also put a copy on a VPS when i am ready to graduate to that level. The proxy list server kind of put it over the top for me as again i can actually use the software for now as i am learning without the ongoing cost of private proxies or a proxy list service.

on a side note holy crap it takes paypal 5 days to clear an e-check wow! the efficiency!

I guess i am off to start my trial !

P.S. why no sound on the training videos? Talk through the walk through might be nice!

Congratulations on your purchase! One thing you need to note is that public proxies is only meant for scraping and we don't recommend users to use them for submission. If you use public proxies you are likely to get pretty abysmal success rates. If you are not tight on budget, I'd recommend you to get at least a few private proxies. Also, we have already started working on tutorials and narrated training videos so you can expect them to be available soon.

 

[SEOSupport]

I'm using Licorne, and I see it being the most powerful SEO platform on the web, come late 2013. As an advanced Xrumer user, I can see the potential in Licorne, Xrumer is rapidly updating, so Licorne has a lot of Captcha improvement to make, but in the little bit of time it has bveen on the market, I see the potential in later updates. If you haven't purchased this yet, then do it (if you want a really good SEO software)

Personally, I love it. It doesn't do very well withour captcha breaker platform (death by captcha, etc) Other than that - Love it!

thanks for programming it..

 

[naskootbg]

After many tests I can say this:
- the only well working module for link building is wiki
- I love mass bit.ly shortener
- I love the scrapper
- I love the live link checker
- the bookmarks - on all my tests only the pligg sites works, but too slow and the success rate is not good (~650 successful signups and ~300 successful bookmarks from over 1000 sites). I think the reason for the slower job is not using the PHP request from the URL. I mean you can create simple php form on any server that can be competed trough php request;post;get using the pligg names on the form's fields (e.g. name="reg_username") and the form action will be e.g. action="http://siteurl/register/". This will skip the ads;images;javascripts.... I can show example on PM and even can create templates for all platforms for few bux. The low success rate comes from the pligg sites' owners and possibly deadbycaptcha. Some owners rename the forms e.g. from http://siteurl/register/ to http://siteurl/registerifyouarenotspammer/ .
- wordpress module - I don't know what is this. I have over 1000 successful registrations and ~10 articles posted. Possibly this is for wordpress private networks owners
- all articles - very low posting success rate
- high page rank 2.0 (and profiles) - very low success rate
- other profile links - I don't test this
- proxy work - perfect
- spinner - perfect

Suggestions:
- increase the quality decreasing quantity. If I remove the sites that haven't success, possibly finally will have no more than 2500 sites, where 1000 are wiki links and possibly 1000 profile links. Anyway - in about 2 weeks I will share only working for me sites.

Thanks!