Permanently Closed Marketplace Sales Thread
- Thread starter CloneX
- Start date
- Status
crazedspyker
Senior Member
- Jan 5, 2010
- 1,004
- 661
Lots of nice fixes! 
It doesn't seem to be letting me add my private proxies though. (Tried both .txt file and by adding it from the interface)
It doesn't seem to be letting me add my private proxies though. (Tried both .txt file and by adding it from the interface)
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
Lots of nice fixes!
It doesn't seem to be letting me add my private proxies though. (Tried both .txt file and by adding it from the interface)
Can you send us a few of your proxies either by PM or to our support email so we can take a look at them? If there is indeed a problem somewhere we may roll out an emergency fix later or tomorrow.
no doubt you guys are amazing
Thanks.
crazedspyker
Senior Member
- Jan 5, 2010
- 1,004
- 661
Can you send us a few of your proxies either by PM or to our support email so we can take a look at them? If there is indeed a problem somewhere we may roll out an emergency fix later or tomorrow.
Thanks.
It's actually not letting me load any proxies at all, even the premium harvest ones from the licorne server. I'm going to try a reinstall and a restart later tonight to see if it fixes it. If not then I will send the details through support.
EDIT: Restart and re-install fixed it
Also, is there a chance we can get a feature to schedule when our submissions start? It's gives a lot more control over setting up tier 1 properties and allows us to schedule a months seo in one go (filler posts, authority link posts, etc. that start at different dates).
Btw, I'm switching over all my wiki building to Licorne now. The success rate is so much higher than my other posting tools. Using my refined list, I'm getting about 95% successful post rate and 90% stick rate after about a month.
Last edited:
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
Thanks for the confirmation.
You need accounts on the sites before you can post on them, so you have to create accounts on StatusNet platform sites first then create a new social network task to submit to the sites.
It's actually not letting me load any proxies at all, even the premium harvest ones from the licorne server. I'm going to try a reinstall and a restart later tonight to see if it fixes it. If not then I will send the details through support.
EDIT: Restart and re-install fixed it
Also, is there a chance we can get a feature to schedule when our submissions start? It's gives a lot more control over setting up tier 1 properties and allows us to schedule a months seo in one go (filler posts, authority link posts, etc. that start at different dates).
Btw, I'm switching over all my wiki building to Licorne now. The success rate is so much higher than my other posting tools. Using my refined list, I'm getting about 95% successful post rate and 90% stick rate after about a month.
The ability to schedule task is one of the features we plan to work on for this month. It will be available either right before or along with the release of diagram module. We may also come up with task chaining feature in the sense that task A will only start after task B is complete like what SENuke is having. That should allow users to setup and schedule link tree campaigns at one go.
Our wiki submitter solves maths captcha internally and also support foreign wiki sites, so it has significantly higher success rates compared to other wiki submitters.
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
For users who are having problems purchasing using the purchase link in the sales page, use the new purchase link below:
http://www.licornesolutions.com/bhw
I will get CloneX to update the purchase link in the sales page later.
http://www.licornesolutions.com/bhw
I will get CloneX to update the purchase link in the sales page later.
CloneX
Power Member
- Mar 31, 2012
- 596
- 230
Link should be updated soon on the OP.
People, please use this link to purchase Licorne AIO!
http://www.licornesolutions.com/bhw
Lanx
Regular Member
- Jan 15, 2008
- 354
- 103
i would love to have easier autoupdate!, it's not like i'm lazy but every other seo program i have does autoupdate, and i'm like "sure i'll click to update" with licorne i'm like "ugh have to goto forum, download, make new directory unzip, copy over 6 folders/files(is it 8 i forget), and then change my shortcut", i guess an easier way would be to copy the 8 files/folders in a temp directory, extract to old directory and recopy over, but that would erase any possible backup or rollbacks.
CloneX
Power Member
- Mar 31, 2012
- 596
- 230
We're implementing it, should be available in next update.
The Supplier
Newbie
- Nov 11, 2011
- 24
- 2
free trial
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
0_00_0
Senior Member
- Oct 7, 2010
- 1,027
- 494
Is there a tutorial (hoping for video) for just creating web2.0 sites like wordpress and tumblr? I had a strangely difficult time setting up a campaign. I had 150 sites checked off and it only created 1 wordpress site :\. It also looked like the software didn't send any captchas to Captcha Sniper at all while I watched it work. Do I need to enable host redirect or CSSE? I'm assuming it sent the rest to DBC which was my backup solution but I only got one link created which was really weird.
Also, could you add Squidoo? I'm not sure if it's already been requested but that would be huge!
I already see this tool having much more potential than SEnuke and it costs so much less. I unfortunately haven't had the time to properly test it out and learn how to properly set up a campaign. My first test was clearly a flop.
Also, could you add Squidoo? I'm not sure if it's already been requested but that would be huge!
I already see this tool having much more potential than SEnuke and it costs so much less. I unfortunately haven't had the time to properly test it out and learn how to properly set up a campaign. My first test was clearly a flop
.
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
Is there a tutorial (hoping for video) for just creating web2.0 sites like wordpress and tumblr? I had a strangely difficult time setting up a campaign. I had 150 sites checked off and it only created 1 wordpress site :\. It also looked like the software didn't send any captchas to Captcha Sniper at all while I watched it work. Do I need to enable host redirect or CSSE? I'm assuming it sent the rest to DBC which was my backup solution but I only got one link created which was really weird.
Also, could you add Squidoo? I'm not sure if it's already been requested but that would be huge!
I already see this tool having much more potential than SEnuke and it costs so much less. I unfortunately haven't had the time to properly test it out and learn how to properly set up a campaign. My first test was clearly a flop
I tested registering on a couple of sites with similar settings and it seems like fallback captcha will not work if your retry failed count is set to 0. I assume most of the sites failed in your case because they mostly use recaptcha. CS does not solve recaptcha and the captchas were not sent to DBC for solving since fallback did not work. That is why you got abysmal success rates with the registration. Can you try setting your retry failed to 1 and let us know the result?
Also, noted your suggestion.
It does something similar but it only spins on paragraph level while WAC can perform something much better than that in terms of content generation.
Blog commenter is only available in v1 at the moment. We will try to get it added into v2 around March (with more platform support).
Lanx
Regular Member
- Jan 15, 2008
- 354
- 103
i don't have horrible internet, i use licorne on my main pc and have other programs like gsa/scrapebox on a vps 24, but when i do like a signup task, it seems to knock out all my connections, i can't browse or anything, this is only with 5 connections too. Also it seems sometimes the submitter just forgets to use my proxies after a while, could this be a connection issue? my proxies are private and dedicated for licorne/article kevo, btw i don't have this issue with other software when a task is being kicked in (for i.e. when a drip fed task starts).
- Status