Rachmaninoff
Elite Member
- Jan 19, 2011
- 3,634
- 5,426
Just bought this bad boy! And it looks like a good investment as far as I can tell 
Will leave a review as soon as I tested it.
Will leave a review as soon as I tested it.
Permanently Closed Marketplace Sales Thread
- Thread starter CloneX
- Start date
- Status
crazedspyker
Senior Member
- Jan 5, 2010
- 1,004
- 661
I was procrastinating on downloading it because I didn't want to learn another software right now but I'm going to test it out tomorrow.
Is there a way to prioritize captcha like in UD? For example, have it use captcha sniper first, and if it fails, then use one of the services like DBC as second priority?
Edit: I decided to take a quick look at it right now and wow. So far I'm impressed. It feels like all the big seo tools combined into one. It's got spinning, scraping, link checking, text modifying, rank tracking, competition checking, etc. I only spent 10 min on it so I've probably only seen the surface. The interface is pretty clean and it feels a lot more responsive than UD so far.
I just set it to create new accounts at 100 threads. Very fast... over 1000 accounts created in almost no time at all.
Is there a way to prioritize captcha like in UD? For example, have it use captcha sniper first, and if it fails, then use one of the services like DBC as second priority?
Edit: I decided to take a quick look at it right now and wow. So far I'm impressed. It feels like all the big seo tools combined into one. It's got spinning, scraping, link checking, text modifying, rank tracking, competition checking, etc. I only spent 10 min on it so I've probably only seen the surface. The interface is pretty clean and it feels a lot more responsive than UD so far.
I just set it to create new accounts at 100 threads. Very fast... over 1000 accounts created in almost no time at all.
Last edited:
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
Can you send a screenshot of your issue to [email protected] so we can take a look at it? If there is a problem somewhere we will get it fixed immediately.
Thanks for the great review! Happy that you're loving it
. Yes with LAIO you basically get a combination of many SEO tools into one (hence the name LAIO). It is not possible to prioritize captcha right now but we will begin working on it after we have released the next version since we have received many requests for it. You can expect it to be available in 2 weeks.
You've definitely made a right decision! Give this baby a whirl, and you'd be impressed at how much it can actually do for you.
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
If you are running the analyzer at a slower computer, it will become unresponsive when you process a very large list or run at a very high thread count. Try lowering the thread count or split the list into few parts (<10k per part) to improve the situation.
crazedspyker
Senior Member
- Jan 5, 2010
- 1,004
- 661
Had a bit of time to play with the tool and just wanted to post my update. This tool easily accepts highly spun content (I tested with 150,000 word spintax so far and it processed it like it was a regular 1k spintax!) and adding/cloning new tasks is super simple and really fast! (Cloning my tasks in UD takes about 1-3 min each just to process it, in Licorne it takes about 5 seconds!). This is exactly what I need because UD had me spending hours waiting on it just to clone my tasks.
I had a small problem where licorne was somehow blocking my internet from functioning (it was open on the link analyzer screen but wasn't even processing anything). My firefox started loading websites all wrong and some sites wouldn't even load. After I closed licorne and everything started working again. I wasn't able to replicate this so something must have just gone wrong that one time. The success rate is also a bit lower than UD at the moment, but it's probably because most of my submission is with the default list. I'm sure my success will double once I start using the custom list I imported from UD.
From what I can see so far, the technology behind this program seems like its light years ahead of UD. (I haven't used it extensively enough to come to a full conclusion yet)
I'm going to grab myself a copy of this tonight after I fiddle with it some more. Is the cosmic module able to automate sites like squidoo, hubpages, wordpress, tumblr, etc.?
I had a small problem where licorne was somehow blocking my internet from functioning (it was open on the link analyzer screen but wasn't even processing anything). My firefox started loading websites all wrong and some sites wouldn't even load. After I closed licorne and everything started working again. I wasn't able to replicate this so something must have just gone wrong that one time. The success rate is also a bit lower than UD at the moment, but it's probably because most of my submission is with the default list. I'm sure my success will double once I start using the custom list I imported from UD.
From what I can see so far, the technology behind this program seems like its light years ahead of UD. (I haven't used it extensively enough to come to a full conclusion yet)
I'm going to grab myself a copy of this tonight after I fiddle with it some more. Is the cosmic module able to automate sites like squidoo, hubpages, wordpress, tumblr, etc.?
Last edited:
CloneX
Power Member
- Mar 31, 2012
- 596
- 230
Thanks for the review.
Yes, Cosmic can. However, bear in mind that the success rates will be pretty low if the sites highly depend on javascript, flash or json.
Licorne Cosmic will return excellent success rates if the site you automate send pure HTTP GET / POST requests (no javascript, flash or json) such as wordpress.com, posterous.com, livejournal.com. You should always avoid sites that rely heavily on javascript such as squidoo, twitter.
Last edited:
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
Noted your suggestion. You can expect it to be available in the next update.
audioguy
Power Member
- Jun 12, 2010
- 608
- 224
Next release is going to be MY release. Lol. Feature request for other software is a pain in the you know what. Thanks for this. With existing features, I can imagine using this for multi-tiered link building already.
Huge amount of sites and diversification. Will report back the results of account creation and submission.
The only two things I noticed, if I may, is memory consumption. After clicking around, managing sites (it has to load data from DB, I suppose) and create an account creation task with all the sites selected. Even before starting the task, and now it is idling, memory consumption grew from 52 MB to over 400 MB.
It's okay if it stays stable at that. Will begin to worry if it continues growing as I only run this on a 2GB VPS.
In UD, when idle, even with ample of projects and tasks, memory consumption is at 2-8 MB.
I usually setup tiered link building manually but add a diagram designer / link tree, LAIO will be a serious contender to UD and Nuke, even for newbies.
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
wow 400 mb memory is huge! It could probably due to resources allocated did not get released completely when you perform certain task. I will get the development to check on that.
I've used LAIO on a VPS with similar specification in the past and I have never run into any major issues (and I do tons of test submission daily on the VPS) so everything should also be fine in your case. Just keep your thread count below 50 or below 30 if you are submitting highly spun articles.
Many of our users have requested for diagram designer feature and we are actually in the midst of planning on getting it implemented, but since it requires larger amount of development effort we may need to take longer to build it. We can't give you an exact date on when it will be available in LAIO but what we can let you know right now is it will definitely be added into LAIO in the near future and we are trying to make it happen by March 2013.
crazedspyker
Senior Member
- Jan 5, 2010
- 1,004
- 661
I'm running account creation tasks multiple times right now so that I can filter out all the broken default websites and have a list with only working sites. Is there a way to disable my private proxies from automatically turning off after x number of consecutive fails?
Also I can't figure out how to add proxies to check PR in the "manage sites" place. The regular proxies I place says it only works for the main submitter. It's a bit hard at the moment to manage site list because the checkboxes don't allow combinations like "select all sites PR 3+ AND Health < 50%"
Also I can't figure out how to add proxies to check PR in the "manage sites" place. The regular proxies I place says it only works for the main submitter. It's a bit hard at the moment to manage site list because the checkboxes don't allow combinations like "select all sites PR 3+ AND Health < 50%"
Last edited:
Sampler
Senior Member
- Nov 1, 2010
- 983
- 882
Let's say I have a bunch of Wordpress sites which
I've already created. Is there a way I can mass-
import these to use inside of your program, which
I can then publish an article to them and extract the
links from the articles which were just posted?
Thanks
Sampler
I've already created. Is there a way I can mass-
import these to use inside of your program, which
I can then publish an article to them and extract the
links from the articles which were just posted?
Thanks
Sampler
makeitrain85
Regular Member
- Nov 4, 2009
- 237
- 28
I'm on a Core i3 Dell computer which I'm guessing isn't strong enough to handle this software. So if I buy Licorne AIO v2, do I also need Proxies, VPS as well?
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
i3 processor should be sufficient to run LAIO without problems if you have at least 2 gb ram. As mentioned above, just make sure you limit the thread count to 50 or below 30 if you are attempting to submit highly spun content (since more resources will be consumed to generate variation for highly spun content). Proxies is not a must if you plan to do small blast with LAIO but if you plan to do bigger blast I would highly recommend you to get at least 10 private proxies for reliable success rates and also to avoid being flagged as spam. For proxy provider I recommend you to check out http://www.newipnow.com (they have a BST here). We have used them in the past and have really good results with them.
Such feature is not available in LAIO now but we may consider working on it after we have implemented the feature suggested in post #129.
We did not include the ability to disable proxy from automatically turning off with the rationale that if a proxy fails for many consecutive times, it's either dead or has extremely poor performance but we soon figured out that users may need that feature to avoid having own IP being used for submission when all proxies get disabled after many consecutive failures, so we will add the ability to disable automatically turning proxies off in the next update.
It is not possible to select sites based on two criteria for now (as of v2.5) but it will be possible in v2.51 because it will have the ability to show only selected sites. So to achieve what you want you can select sites with PR3+ then click Show Selected and it will show only sites with PR3+ and hide the others, then select sites with health <50%.
licorne101
Registered Member
- Aug 22, 2011
- 95
- 123
v2.51 IS OUT!
General
-Added the ability to retry failed registration/submission
-Added ShaniBPO Captcha solving service support
-Added 80+ bookmarking sites
-Increased bookmarking submission success rates (and also live link extraction rate)
Article Related
-Load articles from folder now use first line in the file content as title (instead of file name)
-Load articles from folder now automatically fill resource, summary and tags
Sites Related
-Added the ability to show only selected sites for Sites control and Site Manager
Link Analyzer
-Link Analyzer now show warning when user tries to analyze a large number of links
Editor
-Fixed issue with "import from folder" button not working for textbox control
Spinner
-Fixed issue with protected terms not working for SpinnerChimp, SpinChimp and SpinRewriter
Proxy
-Added the ability to disable automatic proxy turning off after certain number of consecutive failures
-Added the ability to select all working proxies
-Added the ability to export selected proxies
Live Link
-Fixed issue with live links not being extracted properly with the character '%' is present in the URL
Task related
-Added the ability to change task name template (Settings -> General -> Task Name)
GUI
-Added training video button under Help
Misc
-Fixed issue with Copyscape,Spinnerchief,SpinChimp links not working in settings windows
Kn9Isler
Regular Member
- Jul 18, 2012
- 301
- 119
Hi guyus,first of all LAIO is just great. I?d no time to try everything, but it looks promising.I?ve already have some suggestions and will definitely have some more later.
what I?m missing so far:
- Captcha. UD has 2 nice features. First you can set the number of retries for failed submissions and second set the priority of visual aid providers.
- The retry button after the submission is complete. (already added, thanks)
- Retry button for failed sites by adding them to the list
- Spinning of usernames. I?ve made a test with 20 sites and had 1x3 accs, 3x 2 accs werewith the exact same username. It would be better if it was more spinnable, like {alex|john|?}{carter|parker|?}{4234|434|?}
Thanks
what I?m missing so far:
- Captcha. UD has 2 nice features. First you can set the number of retries for failed submissions and second set the priority of visual aid providers.
- The retry button after the submission is complete. (already added, thanks)
- Retry button for failed sites by adding them to the list
- Spinning of usernames. I?ve made a test with 20 sites and had 1x3 accs, 3x 2 accs werewith the exact same username. It would be better if it was more spinnable, like {alex|john|?}{carter|parker|?}{4234|434|?}
Thanks
- Status