My SEO Blueprint (SENuke, AMR, BMD, Xrumer, Scrapebox)

[armageddon85]

this was a great read

 

[amazonian raider]

I am working on setting up Zenno Poster to do something similar to this... going to be a ton of work, but should be epic once I get it all working

I think at one point you said you bought ZP and were thinking about using it. I was wondering if you ended up proceeding with that? And if so, do you have any tips?

 

[TheBlueWizard]

When placing links in the article, is there anywhere in particular we should place them?

I was going to put them in the last paragraph of my article, which is only about 20-30 words of text, would it be better to include them in another paragraph with much more text wrapped around it, instead of a single sentence or two?

These are not set in stone, but what I have seen in my experience when I manually submitted articles.

- Do not capitalize anchor text.
- Anchor text should NOT be the last word in a paragraph/article.
- Typically leave Anchor text anywhere after the 400 word mark.

Hope it helps you with some approvals.

 

[TheBlueWizard]

Update after a couple days.

Currently: on step 13, with bookmark demon.

I'm expecting to hit step 19 by the end of the night, going to leave BMD running the entire night.

Previous Steps Notes

#10. Post on Article Ranks
- Not too bad.
- Came across an issue where spyntax brackets/seperators were being shown in the preview/sample articles. I changed the export format to the one used by AR, but still no good.
- I basically went back in and re-edited/spun my article (a little demoralizing).
- I made it only a two layer spin (words/sentences) and deleted the paragraph spins. TBS said it was 84% unique, and AR was showing beautifully formatted spun articles, looked good to me... submitted.
- Included two links, both to money site. Not sure if one was supposed to be to random web 2.0 - It wasn't specified in my notes that I take and keep updated for this forum, so I assumed both links to the money site.
-Submitted

#11. Blast Promo Article w/Senuke
- Pretty Easy to Use.
- Went through all the settings and watched some videos on youtube on how to configure for use.
- Basically created accounts on the "social network" module
- Submitted Spun article on successful creations. I had about only 35 successful submissions. I find this to be okay - I suspect one of the reasons I got rejected was due to 1) My niche/Keyword can be seen as extremely spam worthy 2) I used a free email for registrations.
- All in All, everything looked decent, not bad for a first time.

#12. Make list with youtube video, slideshare ppt, scribed pdf, manual web 2.0s, Senuked Web 2.0s

Easy enough... just made a .txt file with all the URLs of the submission links (NOT the homepage of the web 2.0, when possible)

#13. Bookmark with BMD above list.

- Purchased BMD 6... apparently this is brand spankin new, so not many tutorial/training stuff yet.
-Cash202 - if by some miracle you are bored, maybe you can update your BMD setup page on your site
- As with all software, requires an hour or so of playing around with, getting comfortable, and finally executing said task.
- BMD is definitely slow, however it seems to work beautifully.

------------Plans for tonight------------

While step #13 is in process: I am harvesting BOTH BMD & AMR lists. Not using Scrapebox for this yet, but simply google'ing lists and filtering them out.

#14 - Make RSS feed and Ping it.
- Going to play with software to learn how to do this.
- Will Ping with BMD/SENuke when #13 is done.
- Estimate around 30 minutes.

#15 - Use SENuke to Blast RSS feed to RSS Directories.
- Seems pretty straightfoward as well. I expect
- Seems like another 30 minute task.

#16 - Prepare Resource Box for Promo Article
- Going to write the text and spin it.
- Going to insert 2 links, and one link WILL be rotated to the Manual Web 2.0 Sites; Other stays static to Money Site.

#17 Blast Promo Article with AMR
- AMR looks pretty simple to use, getting familiar with interface should be less than an hour.
- Aiming to get at least 300 AA, and 1500 overall successful submissions. Honestly though I would feel really good with 400 AA and 2000 Success Subs.
- Willing be using a quick harvested list from today (Currently working on)

#18 Collect List of Approved Articles
- Going to make the RSS feed
- Going to Ping this list
- Going to Blast to RSS directories with SENuke.
- Should be a 30 minute job.
- I'm assuming this should be AA articles only.

#19 Use BMD to bookmark above list of approved Articles.
- Going to leave this running the entire night.

By Tonight, I should feel like a kid going to bed on Christmas eve.

Today was the first real day of blasting, very curious to see what tomorrow brings.

 

[retroslice]

When placing links in every page of the PDF/Powerpoint, do you place them in the footer or just anywhere on the page within some text?

 

[SEOWhizz]

When placing links in every page of the PDF/Powerpoint, do you place them in the footer or just anywhere on the page within some text?

Just add them where appropriate within the text, for example, somewhere within the first 1-2 paragraphs is fine.

 

[TheBlueWizard]

So I'm currently in the process of submitting via AMR. Not much work needed here, but it does appear to be a long process, even though the Robot is amazingly fast.

It has been about 6 days since I started the cycle, and my brand new domain still shows as:


0 Back Links (According to Webmaster tools)
0 Visitors to site (Google Analytics)
Site appears indexed

The search term is a 20k a month buying term, and first page competition appears weak (only a few hundred backlinks, non authority, lack of page content).

To my understanding and of everything I have read here in this particular thread... This is of no concern, and I only need to wait and continue producing backlinks... correct? Especially for a brand new domain?

Apologies to the vets if this has been answered. However, as a newbie pumping out 10 hour workdays on this thing for a week... my anxioty/curiosity is peaking

Appears that the general consent for a new domain is that it takes a while anways.

 

[bozambreaker]

So I'm currently in the process of submitting via AMR. Not much work needed here, but it does appear to be a long process, even though the Robot is amazingly fast.

It has been about 6 days since I started the cycle, and my brand new domain still shows as:


0 Back Links (According to Webmaster tools)
0 Visitors to site (Google Analytics)
Site appears indexed

The search term is a 20k a month buying term, and first page competition appears weak (only a few hundred backlinks, non authority, lack of page content).

To my understanding and of everything I have read here in this particular thread... This is of no concern, and I only need to wait and continue producing backlinks... correct? Especially for a brand new domain?

Apologies to the vets if this has been answered. However, as a newbie pumping out 10 hour workdays on this thing for a week... my anxioty/curiosity is peaking

Appears that the general consent for a new domain is that it takes a while anways.

In the same boat as you, but a little farther down. On a brand new domain with 100K exact searches/mo with 1,000,000 results.

Midway through first cycle I was on page 2. I think I made a mistake in sending some of the Xrumer blast to money site and ranking dropped. Kind of difficult to tell what exactly caused it but I think it was the Xrumer blast. My ranking went from page 2 to page 9. Then it went to page 22. Stayed there for about 4 days. Went to page 14 for a few days. Then went to page 5 where I am currently at now. I'm in the middle of my 3rd cycle.

Some of my web 2.0 articles are actually outranking with one of them on page 3 and a few more on page 4. I'm not exactly sure what this means, but I'm taking it as an encouraging sign.

Also, I have not done the scrapebox part for any of my cycles as of yet. I'm still trying to master the software.

 

[TheBlueWizard]

In the same boat as you, but a little farther down. On a brand new domain with 100K exact searches/mo with 1,000,000 results.

Midway through first cycle I was on page 2. I think I made a mistake in sending some of the Xrumer blast to money site and ranking dropped. Kind of difficult to tell what exactly caused it but I think it was the Xrumer blast. My ranking went from page 2 to page 9. Then it went to page 22. Stayed there for about 4 days. Went to page 14 for a few days. Then went to page 5 where I am currently at now. I'm in the middle of my 3rd cycle.

Some of my web 2.0 articles are actually outranking with one of them on page 3 and a few more on page 4. I'm not exactly sure what this means, but I'm taking it as an encouraging sign.

Also, I have not done the scrapebox part for any of my cycles as of yet. I'm still trying to master the software.

Don't take this the wrong way and am not trying to stick salt in the wounds, but Looking back at my notes, the Xrumer blast directly linking back to money site is where it hurt; Appears that it should have been done to Web 2.0s and Approved Articles from AMR. Brand new domains from what I have gathered are sensitive to direct blasting, however as always, I can be completely wrong on this stuff.

However, midway through the first cycle and you were on page 2 on a 100k searched term!? That's exciting to hear. How much time in terms of days did that take?

Update here with any news of that; Hopefully you can make that page 1. More power to Cash's thread

I think part of my issue (aside from being impatient) might have been something with my on Page SEO, possibly a newbie mistake of some sort. Going to double check everything now. Also going to retrace my steps and see if I left out something in some of the steps.

 

[crzyyoungn]

Just checked this out. Nice outline Cash. The moral of the story as I see it:

-High quality tier 1's
-Links from diverse and authoritative platforms
-Heavy tiered linking

 

[retroslice]

I am trying to create links in my PDF file in Nitro Pdf.
It is only letting me draw a retangle box over the text to make a link, instead of an actual text link???

Is this normal?

 

[kdbbdk]

I have one question
if we dont use scrapebox and xrumer , would that change anything ??

 

[cash202]

For your and other's benefit he's given you an updated version:

DELETED

Please do not post this stuff. This is against BHW rules to advertise other forums.

 

[cash202]

Btw ... whos BH forum is this? new to me? only a few posts?

I bough this domain on the auction.

 

[cash202]

Just checked this out. Nice outline Cash. The moral of the story as I see it:

-High quality tier 1's
-Links from diverse and authoritative platforms
-Heavy tiered linking

Nice summary. I couldn't have said it better myself

 

[cash202]

I am trying to create links in my PDF file in Nitro Pdf.
It is only letting me draw a retangle box over the text to make a link, instead of an actual text link???

Is this normal?

I use Word, put hyperlinks in text and then print it to Nitro PDF.

 

[cash202]

When placing links in the article, is there anywhere in particular we should place them?

I was going to put them in the last paragraph of my article, which is only about 20-30 words of text, would it be better to include them in another paragraph with much more text wrapped around it, instead of a single sentence or two?

I put it everywhere, in first paragraph, last paragraph, in the middle and,
honestly, didn't see much difference. As it was recommended already, I'd
avoid capitalisation, bolding and having a keyword as last words of the
paragraph.

 

[cash202]

I am working on setting up Zenno Poster to do something similar to this... going to be a ton of work, but should be epic once I get it all working

I think at one point you said you bought ZP and were thinking about using it. I was wondering if you ended up proceeding with that? And if so, do you have any tips?

I have Zenno and it is fantastic piece of software. Unfortunately I haven't
much time to write/maintain templates so I stuck with SENuke for now.

 

[darrensss]

I bough this domain on the auction.

Cool - any idea when you think you will get round to completing the updated guide? So far its much better, better written etc

 

[cash202]

When placing links in every page of the PDF/Powerpoint, do you place them in the footer or just anywhere on the page within some text?

In PowerPoint I put it on the top across each slide because I can get real
click this way and SlideShare tends to cover the bottom part with ads.

In PDF I have a big link on the top of each page (for the same reason) and
also in content hyperlinks (the same as when you post an article).