Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
Just curious, have people found they had the most success with having the pins point to their already established amazon affiliate sites or directly to amazon?

Very interested in trying this baby out
 
Yes, I'm one of those newbies. I've been slow at affiliate marketing in the past, and these bots look pretty much idiot proof haha.

PM me so I can purchase please, Gimme!

Thaaaanks
 
I would like to purchase but like the other I cant PM you.

Let me know how to buy.

Thx
 
Bought. The service has been great. Props to the creators.

Service has been great at building out accounts, generating Amazon revenue, or both?

Yes, I'm another one of the relative newbies. Been following this for a little bit but haven't pulled the trigger. Finger is getting itchy though :)
 
This looks like a great product and I have some people very interested in getting started in this. However, they (and I) are mostly looking to make money from the Amazon sales, not from increasing blog traffic.

Has anyone had success with Amazon sales? From reading multiple forums about the product, I haven't found one person that said they made money. However, I do understand that due to protectionism concerns, there is no basis for announcing your successes. But it's kind of odd isn't it that not one person has bragged yet?

If I am wrong, please show me the comments.
 
This looks like a great product and I have some people very interested in getting started in this. However, they (and I) are mostly looking to make money from the Amazon sales, not from increasing blog traffic.

Has anyone had success with Amazon sales? From reading multiple forums about the product, I haven't found one person that said they made money. However, I do understand that due to protectionism concerns, there is no basis for announcing your successes. But it's kind of odd isn't it that not one person has bragged yet?

If I am wrong, please show me the comments.

Same here, I want to use Amazon sales.

As for the service. I was talking about the general communications from the creator.

I do have one question. I am having trouble generating invite codes. How long should the email delay be? Or should I simply run the generator first quickly to send the codes, and then go back later and run it again within an hour or so?
 
What is up with all these people having only 1 post?

Where did you all come from?
 
Same here, I want to use Amazon sales.

As for the service. I was talking about the general communications from the creator.

I do have one question. I am having trouble generating invite codes. How long should the email delay be? Or should I simply run the generator first quickly to send the codes, and then go back later and run it again within an hour or so?
You can use option #2 that you posted or alternatively leave it for 10-14 seconds, the multi-threaded version coming soon will speed up this process :)
 
You can use option #2 that you posted or alternatively leave it for 10-14 seconds, the multi-threaded version coming soon will speed up this process :)

Still doesn't work. I have gone up to 3 min.

As for me only having one post. I have dabbled in bots before, mainly for poker etc. I found this forum and I enjoy it so I joined. I hope to contribute to it.
 
Hey Chris

Anything for this? Tried on 2 computer, same error.

Hey Chris

Got this error when I clicked "Start" in Popular re-submitter.

I loaded 10 accounts, and got this error. No error while using just 1 account.

7D0Vt


Code:
See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at Pinterest_Popular_Pin_ReSubmitter.Form1.Button1_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.239 (RTMGDR.030319-2300)
    CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
Pinterest Popular Pin Re-Submitter
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.1
    CodeBase: file://psf/Home/Desktop/Win/Pinterest/Pinterest%20Popular%20Pin%20Re-Submitter/Pinterest%20Popular%20Pin%20Re-Submitter.exe
----------------------------------------
Microsoft.VisualBasic
    Assembly Version: 10.0.0.0
    Win32 Version: 10.0.30319.1 built by: RTMRel
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.258 built by: RTMGDR
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1 built by: RTMRel
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.235 built by: RTMGDR
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1 built by: RTMRel
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1 (RTMRel.030319-0100)
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.1 built by: RTMRel
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
 
Still doesn't work. I have gone up to 3 min.

As for me only having one post. I have dabbled in bots before, mainly for poker etc. I found this forum and I enjoy it so I joined. I hope to contribute to it.
Please could you email me the log that is being output by the program to: [email protected]

Also double check that you are using verified hotmail accounts or POP enabled Gmail accounts if any issues occur accessing the email accounts themselves.
 
ok i bought mines yesterday you guys did a good job with the software here's how i feel about the software the pinbot really do what they said it would do am only testing 1 account to get a feel for it. this bot can bring in some serious traffic to a offer if done right, Once again if done right. like other tools there's a learning curb to follow but it's short i seen a good base of traffic just from 1 account no am not talking about 10000's of people but if done right i can see it happening just my 2cents:D
 
Has anyone had success with Amazon sales? From reading multiple forums about the product, I haven't found one person that said they made money. However, I do understand that due to protectionism concerns, there is no basis for announcing your successes. But it's kind of odd isn't it that not one person has bragged yet?

This is my big question as well. The Amazon potential is the big draw to this product and seemingly would scale up to decent passive cash flow relatively quickly, yet there's no evidence of its success from the seemingly large number of people that are already running the bots.
 
This looks like a great product and I have some people very interested in getting started in this. However, they (and I) are mostly looking to make money from the Amazon sales, not from increasing blog traffic.

Has anyone had success with Amazon sales? From reading multiple forums about the product, I haven't found one person that said they made money. However, I do understand that due to protectionism concerns, there is no basis for announcing your successes. But it's kind of odd isn't it that not one person has bragged yet?

If I am wrong, please show me the comments.

Google "pinterest + $1000 a day" This is the impact these bots have made.

Same here, I want to use Amazon sales.

As for the service. I was talking about the general communications from the creator.

I do have one question. I am having trouble generating invite codes. How long should the email delay be? Or should I simply run the generator first quickly to send the codes, and then go back later and run it again within an hour or so?

You need to set it up on a 10 second delay, and only do a few with 1 account... the goal here is spread the code generation across several accounts.

Google search, and make that two posts!

Which keyword?
 
Which keyword?

I don't recall exactly. It was a few days ago. Probably something containing Pinterest and bots.

I'm still contemplating this purchase. I have an existing Amazon affiliate account that I can't afford to lose, so there's some hesitation there, as there is with Pinterest putting a stop to this at any given moment considering the press it has been getting.
 
I dont see how Amazon could be against it, they are making money and we are offering free advertising. To be against it would mean that they dont want to make money.

Is the redirecting.php necessary? Ive never dabbled in php files, what server would I upload this to? The one hosting my blog?
 
Status
Not open for further replies.
Back
Top