My SEO Blueprint (SENuke, AMR, BMD, Xrumer, Scrapebox)

[oneder]

I have followed the OP since last May with an older site that I didn't do anything with it.
It was not moving at #9 in Google for a specific KW.
It is now #30.

You're saying you did this method, and all the work it entails, and it went backwards to #30?!?

 

[Expertpeon]

You're saying you did this method, and all the work it entails, and it went backwards to #30?!?

This strikes me as highly unlikely.

 

[Codythebest]

You're saying you did this method, and all the work it entails, and it went backwards to #30?!?

Yes. Lots of daily work, little by little, following every steps. I'm #30 since 4-5 days now. It was #9 for several months. I did this on a site that was not bringing any money, just to test the method. That's unfortunate but not a big lost...

 

[nik-0]

I also experience this but only when I blast my web2.0s too hard. Like 5k comments to each web2.0

To be more precisely, I pointed one web2.0 that I blasted immensively to another site of mine and that particular page dropped back to page 24, not sure if it's coincedence but the page these web2.0's were pointed at earlyer also never ranked despite the easy to rank keyword. ExperPion uses like 20 comments or xrumers for each web2.0 so when doing a 5-10k on each web2.0 might be a bit too much.

 

[akazzz]

11. Blast promo article with SENuke to all Web 2.0 sites it supports excluding those you?ve posted to manually.

Do you use SENUKE to blasts your promo article to the web 2.0s and your money site? or just the web 2.0s?

Btw, in SENUKE, for this Step 11, do you blasts both web 2.0s and social network sites?

 

[darrensss]

can i ask, how do you determine what is low/medium/high kw terms?

 

[Codythebest]

can i ask, how do you determine what is low/medium/high kw terms?

I check that with the Google adwords keywords tool...

 

[Loco Penguin]

Hey Cash202, I've got a question,
When I'm on the 2nd social bookmarking, the bookmarking of the articles from AMR, I know I'm supposed to bookmark only/at least once bookmark for each article but the problem is that I didn't find a way to do it. BMD Loads all the websites in each and every account in EACH and every bookmarking sites, to my calculations, only preparing (not bookmarking) BMD, it has to load more than 500K bookmarks if I have 1K Pligg sites and 500 articles. and only then I will need to use the Dice and check that I want to bookmark only 1 site in each bookmarking site. This is not possible to be done and it's not smart also.. to load 500K sites only for ~500 bookmarks...

Can you please tell me what you are currently using instead of this?

Thanks buddy!

 

[darrensss]

I check that with the Google adwords keywords tool...

I get that and i use the same but how many searches makes a kw low/med/high?

 

[nik-0]

You can't base competitiveness based on number of searches.

If you still want to go that route, here a couple guidelines (though it's very flawed to think like this cause there are real tough ones with very low searches and there are easy ones with 20k searches).

<3000 - easy
3000 - 10000 - low
10000- 75000 - medium
>75000 - hard

 

[cash202]

Quite strange, really. Black Hat is fine, but why do you want to 'spam the shit out of' everything!!! Some day soon, Google will get a hold on the footprint left behind (there is some amount of it left!), and the site will get kicked out.
This is probably fine for affiliate sites and for people who have a short term business. But using it for real money sites is pure suicide!
Still, you've put together a great blueprint, and i'm sure people will find some level of success using it. Thanks for the effort!

Spam the shit out of' everything EXCEPT MONEY SITE! When Google get a
hold of footprint I'll have another blueprint. It's a cat and mouse game.

 

[cash202]

I figured out how to find live links so disregard that question

Just got my final AMR results after 2 runs i guess they are okay but still was expecting better:

1970 confirmed accounts
442 submitted articles
67 non published
197 auto approve
178 just have a blank next to livelink after doing search(what does this mean)

lemme know if these are results that i should have been expecting or not

Close to 200 auto approved is a decent result. Expand your list and you'll
be allright.

 

[cash202]

I'm reading about lower success rates with both AMR and BMD. Have you moved article submission and bookmarking to any other tools?

BMD has a the same success rate and AMR gets worse because people just
pound the default list which is dumb.

Harvest your own list!

This applies to everything. XRumer, Scrapebox, AMR, Pligg, ...

 

[cash202]

Cash,

I've noticed in your BMD strategy guide you mention bookmarking ALL output links including Xrumer urls and "mass blog comments" (which I'm assuming you mean Scrapebox blasts). But I think in your main blueprint you don't mention this and only talk about bookmarking AMR links and Web 2.0 links.

Please can you clarify?

I was written ages ago, before the blueprint. I don't recommend you
bookmark XRumer/Scrapebox links. Bookmarking AMR blast is mostly to help
indexing. Scrapebox links are already indexed (auto approve lists are
harvested by scraping Google search results). And this is exactly why
XRumer blast is blasted with Scrapebox.

 

[cash202]

can i ask, how do you determine what is low/medium/high kw terms?

Remind me to write a keyword research guide....

 

[cash202]

Do you use SENUKE to blasts your promo article to the web 2.0s and your money site? or just the web 2.0s?

What do you mean by using SENuke to blast to the money site? I post
article to Web 2.0 site with two links. One to money site, another to
random manual Web 2.0 site, video or document sharing site.

Btw, in SENUKE, for this Step 11, do you blasts both web 2.0s and social network sites?

I use SENuke's Social Networks module if this is what you ask.

 

[cash202]

Hey Cash202, I've got a question,
When I'm on the 2nd social bookmarking, the bookmarking of the articles from AMR, I know I'm supposed to bookmark only/at least once bookmark for each article but the problem is that I didn't find a way to do it. BMD Loads all the websites in each and every account in EACH and every bookmarking sites, to my calculations, only preparing (not bookmarking) BMD, it has to load more than 500K bookmarks if I have 1K Pligg sites and 500 articles. and only then I will need to use the Dice and check that I want to bookmark only 1 site in each bookmarking site. This is not possible to be done and it's not smart also.. to load 500K sites only for ~500 bookmarks...

Can you please tell me what you are currently using instead of this?

Thanks buddy!

Create many accounts. Five to ten per site. More if you can.
Then use option to create only one bookmark per account.

 

[thebigmac3000]

thank you for the great info, I will really need to step up my game to be on par with you.

Peace

 

[immedicine]

This is the best post I've read in a long while here on bhw. Very good blueprint!

 

[{-.-} Nico]

14. Make RSS feed of this list and ping it. To save me time I wrote a script that makes RSS feeds from my URLs and pings it. You can use links2rss and then upload a feed to your web hosting account and then ping it with SENuke or BMD. Or, you can use Linklicious paid subscription. I DON?T like Linklicious because they turn all your links into 301 redirects that?s why I wrote my own script.

Few newbie questions about this specific point. How many links by RSS feed?

I used links2rss in the past but they're saying that your feed will be hosted only for 24hrs so I burned it in Feedburner. Moreover, some of the RSS directories do not accept links2rss feeds but all of them will accept feedburner.

Is it risky to use feedburner (a G service) for this kind of RSS? I'm using a fake G account for that.
If risky, how can I change the links2rss to another feed accepted by main RSS directories and how can I upload it to my web hosting?
Some of you have hear or used hostmyrss services? is it good or crap?

Thanks of the help!