Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
Big recommendation to people having problems running it: Turn off proxies. If it runs good without proxies, then its problem with your proxies obviously. Its a decent program worth the buy, it should be amazing in the future!
 
Big recommendation to people having problems running it: Turn off proxies. If it runs good without proxies, then its problem with your proxies obviously. Its a decent program worth the buy, it should be amazing in the future!

It's true! I could not create blogs bloggers when I checked several times the file "blognames". I did a test using no proxy and it worked. Unfortunately the blogger account that I used was immediately removed. So yes, if the software does not work this maybe due to proxy file but it is essential to use a proxy to avoid being deleted accounts.
 
You can also try using a VPN, it will stop after maybe 30 accts, but atleast you get 30 accts
 
In all honesty 95% of the support emails I receive end in a slap on the forehead by the user and him/her saying "wow I'm so dumb, didn't see that!" :D Nothing wrong with that, I'm here to help.

Also, be wary that the platforms (especially wordpress and blogger) are notorious for detecting and/or banning proxies. The new 1.5.0 version will have a built-in proxy checker (the current version also has it but it's irky and you have to check the "Use internal proxy testing").
 
I've been using this app for the last couple of hours and cannot get it to register a single profile. I've been following the instructions from the video, but it seems to keep getting stuck on submitting forms. I've waited for up to 10 minutes for a response, but nothing. Any ideas?
 
I've resolved it. I thought I was using names that would not already exist, clearly not. Just popped a '1' after all the aliases and now working. Nice!

Would it be ok to upload the same article to each new web property with the same link? Also, Tumblr is notoriously hard to index, any suggestions?
 
I've resolved it. I thought I was using names that would not already exist, clearly not. Just popped a '1' after all the aliases and now working. Nice!

Would it be ok to upload the same article to each new web property with the same link? Also, Tumblr is notoriously hard to index, any suggestions?
You can definitely upload the same article to all the web properties if you want (with the same link in the article)
 
Ok, I've been testing this software for a while now, it's kind of frustrating.

For every blog that I create I need to put '1' at the end of the keyword / title, which makes for a cumbersome experience.

Also, If keyword #1 is already taken, the software just halts and does nothing until you tell it to start up again. What is needed is to be able to detect these and move on to the next one. Because I have to go in, manually remove it and load up the file(s) again. A simple time out option will do! Not sure If I Can use it in it's present state as it takes a lot of time to create accounts.

I also created one paragraph of copy for an article to upload and it's cut it into various different pieces.

Also, the captcha takes about 5 min to solve per account.

Not impressed so far!
 
I would like to see article builder api in this thing, that would be crazy, maybe custom made? Can I ask for custom modification, of course not for free.
- Vaistinu Vaskrse!!
 
danielson101 said:
For every blog that I create I need to put '1' at the end of the keyword / title, which makes for a cumbersome experience.
Well it really isn't my fault or the fault of uberBlogCreator if the username has been taken. There's no need to put "1" at the end of each username, you simply need to have a unique username, which makes sense.

Also, If keyword #1 is already taken, the software just halts and does nothing until you tell it to start up again. What is needed is to be able to detect these and move on to the next one. Because I have to go in, manually remove it and load up the file(s) again. A simple time out option will do! Not sure If I Can use it in it's present state as it takes a lot of time to create accounts.
The software does detect the username being taken... it displays the "username taken" message, and skips to the next one in the blog names file.

I also created one paragraph of copy for an article to upload and it's cut it into various different pieces.
You've obviously written the article file incorrectly then. Read the help file.

Also, the captcha takes about 5 min to solve per account.
Uh, what? The captcha is solved either manually (by you typing it), or by DeathByCaptcha. If it takes 5 minutes and you're using DeathByCaptcha, than it's DBC's problem, not UBC's.

To me, it just seems as if you downloaded the software, and ran it without even touching the help file. It looks like you didn't format the blog names and the article files correctly. Please read the help file thoroughly
 
Did you consider contacting support? What's wrong with it? Please send an email to support @ uberblogcreator.com

I did submit a ticket to support.

My problem was not resolved.

I would suggest to everyone to wait the next upgrade..

That one might work.
 
I did submit a ticket to support.

My problem was not resolved.

I would suggest to everyone to wait the next upgrade..

That one might work.
From what you can see in the posts above you, the software clearly works. It's probably the problem with the way you set up your files. Can you tell me your email address? I'll see what I can do about your ticket.
 
Well it really isn't my fault or the fault of uberBlogCreator if the username has been taken. There's no need to put "1" at the end of each username, you simply need to have a unique username, which makes sense.

The software does detect the username being taken... it displays the "username taken" message, and skips to the next one in the blog names file.

You've obviously written the article file incorrectly then. Read the help file.

Uh, what? The captcha is solved either manually (by you typing it), or by DeathByCaptcha. If it takes 5 minutes and you're using DeathByCaptcha, than it's DBC's problem, not UBC's.

To me, it just seems as if you downloaded the software, and ran it without even touching the help file. It looks like you didn't format the blog names and the article files correctly. Please read the help file thoroughly

Obviously? What makes you say that?

1. The article I posted had no paragraphs
2. I use death by captcha for a range of other services and yours is the only one that is slow.
3. I received no such notification.

I'd say you've had a long day dude, get some rest and try this again tomorrow when you're fresh and less tired.

Treating people as individuals goes a long way.
 
Obviously? What makes you say that?

1. The article I posted had no paragraphs
2. I use death by captcha for a range of other services and yours is the only one that is slow.
3. I received no such notification.

I'd say you've had a long day dude, get some rest and try this again tomorrow when you're fresh and less tired.

Treating people as individuals goes a long way.
Long day indeed :) In any case, you should email support at uberblogcreator.com . Attach the blog names file you used, as well as the ubc.log file found in the installation directory.
 
I've been using uberBlogCreator for almost two weeks now and it's great. All of the guys who have had problems, check your blog usernames/article/proxy file. It's probably not formatted super well. I've gotten in touch with uberblog support a few times and they helped me immediately, and it was always my fault lol :D in any case, it's a fantastic piece of software, i've created thousands of blogs on all platforms and it just works. Not a single one has been banned either
 
I just wanted to vouch I had help from Bo within 2 minutes the first time & a half day on the other two support requests. This was since 2 days ago.

Seems like a helpful person and open to suggestions.
 
Thanks a lot to both of you!

I also want to share this
Code:
http://uberblogcreator.uservoice.com
Please feel free to submit feature requests, software ideas, etc. right here.
 
im glad there are alot of stable comments. i might get this one.
Thanks ;) The software is stable, as I keep saying, vast majority of people who report "bugs" do so because they made an error on their own.

Perhaps one of the biggest flaws of the software is that when it hangs (rarely so, when it encounters some unusual response from the server), it doesn't notify the user what happened - it only writes the error to the log. This is fixed in the next version, where every error is being reported to the end user :)

I've also added numerous under-the-hood improvements. Email confirmation should now be about 20% faster, proxy now has a stable built-in checking tool, and the 4 new modules implement a new API version that increases the overall speed of account registration. This is on top of all the new features, such as the aforementioned 4 new platforms, DeCaptcher.com support, CaptchaSniper support, an increase to the maximum blog size from 100 to 1000, etc.
 
Status
Not open for further replies.
Back
Top