Permanently Closed Marketplace Sales Thread

[NoHoneyWithoutMoney]

ok here are the standard comments

+%22Leave+a+Reply%22+%22Name%22+%22required%22+%22will+not+be+published%22+%22Website%22

+%22CommentLuv+Enabled%22+OR+%22Enable+CommentLuv%22
+%22This+site+uses+KeywordLuv%22
+%22Comments+links+could+be+nofollow+free%22
+%22Top+Commenter%22+OR+%22Top+Commenters%22

so how will we change any examples ..

thanks

 

[jimbobo2779]

Love it , 2 brand new sites , i tested as many people say no good for brand new sites , but it worked like a magic .

already on page 1 , 35th day , and not very easy word .

However it has failed in high competition . Dont know why ....

But over all my A+++

I'm glad you are seeing the benefit of NHSEO. As for higher competition keywords you will be needing a much rounder link profile for anything competitive, in these situations its normal that a couple of link types will not be sufficient on their own to make any huge gains. Mix in some different types of links from some high PR web2.0 sites and other link sources with your NHSEO links and you should see some gains, also maybe run your other linking pages through NHSEO to give them a boost.

how and where to use captcha sniper can anyone explain

Load Captcha Sniper, select captcha's type 16 and 30, load NHSEO, choose "Enable Captcha Support" in the "Settings=>More App Settings" tab and save the settings. Run NHSEO as normal.

That's a lot of comments. I got 43000 comments posted and just over a 1000 approved.

But I am the same boat as you now. It reached a 1000 about confirmed now I see 1-4 confirmed links a day....

I am on my 5th day trail today, with the following results:

Whois posted: 1254
Comments: 150044
Trackback: 79081
Confirmed: 1321

Everything looks 'ok', but I have been stucked on 'confirmed: 1321' for 2 days, with no or VERY LITTLE improvement. Am i doing anything wrong here or what?

Thanks.

It is quite normal to have periods of relative inactivity as the keywords will begin to become slightly exhausted. When NHSEO is running it will use the keywords entered to search for targets, if all keywords have been searched it will attempt to find relevant keywords to find more relevant targets and will continue this until there are no more relevant keywords.

Due to it searching similar keywords it can sometimes take a while finding new targets to post to, this can last a day or two or might not ever appear to happen (as lots of users never notice it) and it is quite dependant on the keywords used. If lots of profiles and threads are used it is unlikely the user would really notice this but it can carry on for a few days on a profile.

You can add more keywords to a profile by editing it and simply adding more keywords, this will not be an immediate change but will get it out of the "slump" sooner if the keywords entered are not already in the system. I was hoping v1.6.17 would have extra controls for keyword and target handling but that may have to be pushed back to v1.6.18 or v1.7 depending on time constraints. These extra keyword handling controls will allow you to see what keywords have/are being used and remove/add at will easier.

Must agree with that - excellent support here. @NHSEO are there any tutorials in regards to best of practice etc available yet? I have a very fast connection so am a little worried re creating links too fast - what's your opinion as I can't yet control the output in a scheduled manner?

I have been trying to add more bits and bobs to the No Hands SEO Support Forum, currently it is a little limited in the way of tutorials. Anybody is welcome to add any tips or guides they may have to the correct section of the forum.

If you are worried about how many links you are creating you can simply lower the number of threads or add more profiles. Adding more profiles will mean the amount of links generated will be spread across more profiles so each one will receive less links overall and lowering the threads will lower the amount of total links received.

ok here are the standard comments

+%22Leave+a+Reply%22+%22Name%22+%22required%22+%22will+not+be+published%22+%22Website%22

+%22CommentLuv+Enabled%22+OR+%22Enable+CommentLuv%22
+%22This+site+uses+KeywordLuv%22
+%22Comments+links+could+be+nofollow+free%22
+%22Top+Commenter%22+OR+%22Top+Commenters%22

so how will we change any examples ..

thanks

Why do you want to change the footprints? What are you wanting to do with them?

I always try to suggest users not change the footprints unless they know exactly what they are doing as it is a good way to get the number of targets, and therefore link opportunities, to plummet if you are slightly unsure. I'll happily help edit them how you see fit but if you are not 100% sure of what you are looking it you will probably be better served not touching it.

 

[SEOfarmer]

Does NHSEO supports Linklicious API?
This will be a useful feature if it doesnt right now.

 

[revekozu]

I have been trying to add more bits and bobs to the No Hands SEO Support Forum, currently it is a little limited in the way of tutorials. Anybody is welcome to add any tips or guides they may have to the correct section of the forum.

Yay! I know running a forum is an extra hassle, but I much prefer threaded topics for finding answers and seeing what others are doing. (even though you are among the best at quickly responding to questions)

 

[BlueZero]

I am finding hard to delete a profile. I have about 10 that i want to delete. First thing i've made is that i deactivated them all. Then I clicked on delete on all of them but nothing happens.... for two days.

Do you have some tips jimbo?

Thank you

 

[jimbobo2779]

Does NHSEO supports Linklicious API?
This will be a useful feature if it doesnt right now.

No it doesn't. You can output a list of your pages which I would imagine you could use to import your pages if you so desired. As the pages are already indexed I have never struggled to get the SEs to notice the links, it isn't like you are trying to get pages indexed like with forum profiles for example.

Yay! I know running a forum is an extra hassle, but I much prefer threaded topics for finding answers and seeing what others are doing. (even though you are among the best at quickly responding to questions)

Yeah I'm hoping the forum will take some of the support pressure off eventually, it just needs a lot of content. I'm sure it will get to a point where the forum is a great resource for users.

I am finding hard to delete a profile. I have about 10 that i want to delete. First thing i've made is that i deactivated them all. Then I clicked on delete on all of them but nothing happens.... for two days.

Do you have some tips jimbo?

Thank you

Removing a profile can take a couple of minutes as it performs a vacuum on the database which trims the fat essentially, if there are lots of items in the database this can take some time. I might split these two tasks as I know on larger databases/slower computers it can take a while to perform.

Try removing one of the smaller ones at first on its own, failing that I will try to get it into the next update.

I would just like to say guys if I am not online so much to answer questions don't worry I will be back online more again soon. My internet has been having some major intermittent faults the past few days so my access has been limited, it is also why v1.6.17 was not released yesterday and may be delayed for a few more days. I hope to be back up and running 100% by tomorrow but it could be monday, depending on when the tech can come out.

 

[HatIsBlack]

@jimbobo2779: you should reconsider how your blackword list is used. if you have a black word like "anal" every page that use google analytics will be blacklisted. I would sugest that you strip away all html and js before the filter is runned Otherwise you seem to have made a great piece of software (=

 

[BlueZero]

Removing a profile can take a couple of minutes as it performs a vacuum on the database which trims the fat essentially, if there are lots of items in the database this can take some time. I might split these two tasks as I know on larger databases/slower computers it can take a while to perform.

Try removing one of the smaller ones at first on its own, failing that I will try to get it into the next update.

Yes they were removed this night. So its ok. I just thougt that it does not work at all. Thank you.

 

[Loxel]

To OP and all guys here!

Hi there guys,

I'm using this software and right now I was wondering about a few things:

1) I was curious about the effective blog comments posted by the software: so I copied one of the blogs that the software said the comment was posted on...and no comment was there...so??? was going on???

2) How long does it take for A PAGE to be indexed by google with this software?

3) During the execution of the software my Avast antivirus blocks some blogs that seem dangerous: do this concern you guys? How to put remedy?

 

[foodtrip]

Will try to use NHSEO to web 2.0 properties next week. Should I list them as page or websites? Just wondering, if web 2.0 can be included on WHOIS links.

 

[SEOfarmer]

Is it possible for us to import a list of web2.0 properties and have NHSEO blast them accordingly? Or do i have to create a 'profile' for each properties in that case?

If thats not possible, do you recommend putting all the properties into a RSS feed, and blast the feed instead?

Please advise.

 

[no4h~]

Running into a number of email complaints from websites about 'spam' after running this over night. This has forced me to stop using the program, because the backlinks I'm building are for an actual company with actual customers.

What's the best way to avoid this?

 

[jimbobo2779]

Running into a number of email complaints from websites about 'spam' after running this over night. This has forced me to stop using the program, because the backlinks I'm building are for an actual company with actual customers.

What's the best way to avoid this?

You can add the complaining blog owners to your blocked domain list so you never hit them again and/or just promote pages that link in to your client sites such as web2.0, article links and forum links etc

Is it possible for us to import a list of web2.0 properties and have NHSEO blast them accordingly? Or do i have to create a 'profile' for each properties in that case?

If thats not possible, do you recommend putting all the properties into a RSS feed, and blast the feed instead?

Please advise.

Importing of profiles has never been supported as it would give people a much easier way to enter in a bunch of profiles with the same keywords and anchor texts which would just be bad for many reasons. You can enter in a group of pages to a single profile so you can keep the same search keywords and anchor texts for all of your pages without having to enter in a bunch of profiles individually.

You can enter the pages into an RSS feed or just add them straight to the tool, you could even do both.

Will try to use NHSEO to web 2.0 properties next week. Should I list them as page or websites? Just wondering, if web 2.0 can be included on WHOIS links.

If you have a web2.0 property it is not a website. If you are the owner of a website and want to promote the entire website then you enter it as a website. If you have only a page or a subsection of a website you do not want to enter it as a website otherwise you will be promoting the whole of the website instead of just the pages that are linking back to your website which is a waste.

To OP and all guys here!

Hi there guys,

I'm using this software and right now I was wondering about a few things:

1) I was curious about the effective blog comments posted by the software: so I copied one of the blogs that the software said the comment was posted on...and no comment was there...so??? was going on???

2) How long does it take for A PAGE to be indexed by google with this software?

3) During the execution of the software my Avast antivirus blocks some blogs that seem dangerous: do this concern you guys? How to put remedy?

1) From the FAQ in this thread:

Why do I not see my link when I check a post?
Not all posts will be accepted and result in a link. When No Hands SEO runs it will do all of the link checking for you automatically and ping the page if your link is found. If you are looking at the unconfirmed links or the posted links you are not looking at the confirmed links. If you want to see what links have been confirmed output the confirmed list by right-clicking on your profile(s).

2) How long is a piece of string? Its really impossible to say it will take X time to get indexed and it depends on a lot of things but in most cases a day to a couple of days. However if you just run for 10minutes a day it could take weeks.
3) Easiest way to remedy this is to get a decent AV scanner. Microsoft Security Essentials is free and does a much better job than most other AVs out there, has a low system usage, low false positives and high accuracy for catching actual viruses.

This has been covered many times already and is basically the AV scanner checking every page request and checking against a central database, when it sees it is contacting a page on a suspicious domain it is blocking it. This adds bandwidth cost to running the tool and actually uses up more of your CPU cycles.

This extra activity from your AV scanner is completely redundant as none of the code on the pages is ever executed so there is no risk.

@jimbobo2779: you should reconsider how your blackword list is used. if you have a black word like "anal" every page that use google analytics will be blacklisted. I would sugest that you strip away all html and js before the filter is runned Otherwise you seem to have made a great piece of software (=

Without getting in to the deep details about why it isn't that way it is because of high CPU usage to do it the way you suggest, uses lots more memory and can introduce unrecoverable errors which cause a hard crash of the whole tool.

It has been looked into a few times before but it isn't likely to be changed from how it is in the next few updates.

 

[HatIsBlack]

Without getting in to the deep details about why it isn't that way it is because of high CPU usage to do it the way you suggest, uses lots more memory and can introduce unrecoverable errors which cause a hard crash of the whole tool.

It has been looked into a few times before but it isn't likely to be changed from how it is in the next few updates.

Ok i get the point about that but maybe you could add an option so you can enter keywords like "anal " or "butt ". if you enter a space at the end or begining it is trimed down and removes the spaces.

 

[Griddler]

hay,

want to ask if there better results when i have captchasniper?


cheers

 

[jimbobo2779]

Ok i get the point about that but maybe you could add an option so you can enter keywords like "anal " or "butt ". if you enter a space at the end or begining it is trimed down and removes the spaces.

I'll have a look at getting it changed to work with spaces, might not be this update but shouldn't take too long to implement it.

hay,

want to ask if there better results when i have captchasniper?

cheers

I have experienced better results. I originally was getting about 2x the confirmed links in the same amount of time but it is hard to say with certainty how much of an improvement it can make mainly because comments and trackbacks are very random by nature and so it make it hard to draw any conrete conclusions about it being used for finding auto-approve links.

However one area I think CaptchaSniper really is worth its weight in gold is for getting comments accepted when they end up in the moderation queue. If you are using your own custom comments that are niche relevant but vague enough to read like a genuine comment in most circumstances I have seen huge improvements when using CaptchaSniper.

 

[Griddler]

Allright I bought it, waiting for my license.

thanks

I have experienced better results. I originally was getting about 2x the confirmed links in the same amount of time but it is hard to say with certainty how much of an improvement it can make mainly because comments and trackbacks are very random by nature and so it make it hard to draw any conrete conclusions about it being used for finding auto-approve links.

However one area I think CaptchaSniper really is worth its weight in gold is for getting comments accepted when they end up in the moderation queue. If you are using your own custom comments that are niche relevant but vague enough to read like a genuine comment in most circumstances I have seen huge improvements when using CaptchaSniper.

 

[WhiterThanWhite]

I tried the trial, and run the software 3 days straight, I got 295 confirmed backlinks, is this normal?

Please help. I am trying to familiarize the software before buying.

Im just a little worried since I don't have VPS yet, and running 3 days for just 295 backlinks, I think it's worth the charge that I will pay for the electricity. Unless there's something we can do about it. Thanks

 

[TheRealRazzy]

I bought NoHandsSEO the other day and blasted all my second tier URLs and it worked like a charm

The only thing I messed up was that I bought it directly from the site and forgot to use the discounted payment button on this sales thread lol. But I don't mind one bit because this software is pretty good

 

[Griddler]

Hay Jim can you explain what exactly settings I need fpr captcha sniper working best with NHSEO.

You said some threads above, select captcha's type 16 and 30 but which plattforms should I tick on? (All Blogs?)

thanks