Test my proxy tool for a FREE copy

[headhunterzz]

Hello,
i m trying your trial, and i have one request for the moment. I will try to explain:
When we have a list of proxies, i do "test all proxy" and done, we have result. But when we ordered the list we have sort it by : 1. higher speed (ex: 1400 ms) 2. good speed ( ex:125 ms) 3. all the rest ( bad, dead, untested);
it would be perfect if we could have this order: 1. good speed 2. higher speed 3.the rest,
thanks!

 

[DSMPowah!]

I would be more than happy to test this out for you! I have a lot of experience with C/C++, Perl, among other languages, and have done WAYYY too much bug chasing in my time.

 

[Jrim_Software]

Hello,
i m trying your trial, and i have one request for the moment. I will try to explain:
When we have a list of proxies, i do "test all proxy" and done, we have result. But when we ordered the list we have sort it by : 1. higher speed (ex: 1400 ms) 2. good speed ( ex:125 ms) 3. all the rest ( bad, dead, untested);
it would be perfect if we could have this order: 1. good speed 2. higher speed 3.the rest,
thanks!

Hey headhunterz,

I apologize for the misunderstanding but I'm actually not sure what you mean, can you try to explain it differently?

I would be more than happy to test this out for you! I have a lot of experience with C/C++, Perl, among other languages, and have done WAYYY too much bug chasing in my time.

Hey DSM,

The program has been tested pretty heavily and aside from the 4 bugs Nitros posted, I think we have caught them all! But I like your enthusiasm and experience and you are more than welcome to test a copy I will PM you the link.

Best regards,

Jrim Software

 

[nYXem]

I tried it on a server and for some reason, I can't get it to work properly.

In the automation feature, I have put my email ID, but I never receive any email with the list.

And something like a bug I found, not sure whether someone already found it.
I started the tool and its scraping the proxies from the internal sources and the further recursive method(which is an absolute delight!!), and I stopped it after it found around 19K proxies. Now I started checking them. The "Working Proxies" counter started increasing. I could see both live and dead proxies in the list(green and red), means all were not working(quite normal). Everything went fine till now. When the checking completed, the "Working proxies" counter suddenly jumped and now it showed the exact number of proxies as in the actual list that the tool scraped, which was around 19K, like I said. At first I thought may be I did something wrong, so I repeated the whole process(this time I scraped less proxies though) but the result was the same, it showed same number of proxies in both Total proxies and Working proxies.

But again, when I exported the working proxies, the list I got was not the complete scraped list. So to me it seems like the problem is only in the counter, while the export feature works fine.

By the way, I was using the Trial version available on your site.

OS: Windows Server 2008 RC2 (64bit)

 

[deepkg]

I realllllllllllllllllllly love this tool Can u give it to me for free forever lol

 

[yoyo33]

Fastest proxy grabber/checker tested until now!
I have free trial of 1.0.0.17.
I used with 300 threads on my winxp sp3 laptop (celeron) and I was still able to browse stuff... great.

 

[headhunterzz]

Hey back, i will try with another words,
when i m running the scrap of proxies and test proxies in same time, and i click on "speed (ms)", it give proxies in this way:
1. working proxies but bad speed
2. working proxies and good speed
3. bad, dead ans untested,
it must be better to have proxies with good speed in first, is it ok?

 

[Jerometick]

Hello,

I'm interested in the testing!

 

[Jrim_Software]

I tried it on a server and for some reason, I can't get it to work properly.

In the automation feature, I have put my email ID, but I never receive any email with the list.

Can you upload a screenshot of your Automation settings window, please? (black out your e-mail) Also, did the status window ever indicate anything about sending an e-mail after the automation cycle ran?

And something like a bug I found, not sure whether someone already found it.
I started the tool and its scraping the proxies from the internal sources and the further recursive method(which is an absolute delight!!), and I stopped it after it found around 19K proxies. Now I started checking them. The "Working Proxies" counter started increasing. I could see both live and dead proxies in the list(green and red), means all were not working(quite normal). Everything went fine till now. When the checking completed, the "Working proxies" counter suddenly jumped and now it showed the exact number of proxies as in the actual list that the tool scraped, which was around 19K, like I said. At first I thought may be I did something wrong, so I repeated the whole process(this time I scraped less proxies though) but the result was the same, it showed same number of proxies in both Total proxies and Working proxies.

But again, when I exported the working proxies, the list I got was not the complete scraped list. So to me it seems like the problem is only in the counter, while the export feature works fine.

By the way, I was using the Trial version available on your site.

OS: Windows Server 2008 RC2 (64bit)

Hey nYXem,

This is very helpful feedback, thanks a lot! Your thoroughness makes things a lot easier to understand This is very odd behavior and I will try to reproduce it on my end to see if I can work out a bug fix. I just ran the tool with a sample 300 proxies, and in the end it had 255 working and the counters were proper. Were you letting the program run until the status window said 'Finished testing proxies!', or stopping it prematurely?

Fastest proxy grabber/checker tested until now!
I have free trial of 1.0.0.17.
I used with 300 threads on my winxp sp3 laptop (celeron) and I was still able to browse stuff... great.

Glad you liked the software

Hey back, i will try with another words,
when i m running the scrap of proxies and test proxies in same time, and i click on "speed (ms)", it give proxies in this way:
1. working proxies but bad speed
2. working proxies and good speed
3. bad, dead ans untested,
it must be better to have proxies with good speed in first, is it ok?

Oh, I get it now! Send the proxies without results (untested/bad/dead) to the end of the list, UNDER the actual ones with speed results! It shall be done in 1.0.0.18, along with the bug fixes that Nitros mentioned.

Hello,

I'm interested in the testing!

You can download a free 7 day trial from http://proxy.jrimsoftware.com/download

I realllllllllllllllllllly love this tool Can u give it to me for free forever lol

Haha, glad you like it! Maybe if my BST thread is approved you can consider supporting the software with the 25% BHW discount

 

[yoyo33]

Hello again.
For some time something is bothering me, maybe you can solve this.
Not about Proxy Multiply, somethin else.
I test public proxies and I get 400. I test again this 400 and I get 385.
And so on... until I get 30-50 stable public proxies.
Maybe you can add an option: test 10 times and save only proxies that pass all 10 or 100 checks!

 

[Jrim_Software]

Hello again.
For some time something is bothering me, maybe you can solve this.
Not about Proxy Multiply, somethin else.
I test public proxies and I get 400. I test again this 400 and I get 385.
And so on... until I get 30-50 stable public proxies.
Maybe you can add an option: test 10 times and save only proxies that pass all 10 or 100 checks!

Hey Yoyo,

You could always enable automation to re-test the proxies automatically every 1 minute

Best regards,

Jrim Software

 

[whitehat2]

Just now i have downloaded this.. I will try this..

 

[walrus_78]

I downloaded it and Installed, it asked for an auto update, and it's taking a long time "Authorizing Appliction...", it's been like 10 minutes, I'll close it and install again.

Edit.
The second time it was a fast install and update. I'll start testing now

Edit 2.
After 20 minutes of testing it got 30% of working proxies and 3% of high anonymous proxies, for me its very good because it is 300 High Anon. working proxies.

There was an error warning with Net 4.0 while trying to copy a proxy, it clicked continue and everithing went smooth again.

 

[headhunterzz]

Almost done haha no easy but i tried . So for exemple when i click on "Speed ms" button, it could be great to have : proxy1 125 ms - proxy2 1500 ms - proxy3 4550 ms - proxy4 dead ... and actually it s proxy1 4550 ms - proxy2 1500 ms - proxy3 125 ms - proxy4 dead.
I think that s all for the moment before the end of the trial.

 

[nYXem]

Can you upload a screenshot of your Automation settings window, please? (black out your e-mail) Also, did the status window ever indicate anything about sending an e-mail after the automation cycle ran?



Hey nYXem,

This is very helpful feedback, thanks a lot! Your thoroughness makes things a lot easier to understand This is very odd behavior and I will try to reproduce it on my end to see if I can work out a bug fix. I just ran the tool with a sample 300 proxies, and in the end it had 255 working and the counters were proper. Were you letting the program run until the status window said 'Finished testing proxies!', or stopping it prematurely?

Here's the screenshot of my automation settings:

No the status window didn't show anything about sending the email. I'm sure because I was expecting some message there.

And about the counter, no, I didn't stop the checking prematurely. I allowed it to go through to entire list.

 

[Jrim_Software]

Here's the screenshot of my automation settings:

No the status window didn't show anything about sending the email. I'm sure because I was expecting some message there.

And about the counter, no, I didn't stop the checking prematurely. I allowed it to go through to entire list.

nYXem,

Thanks for the screenshot! Now I see the issue! Probably somebody else's, too... this would explain a lot You need to check the box that says 'At the following interval'. Otherwise, automation is NOT enabled.

Best regards,

Jrim Software

 

[nYXem]

Ahh I see. I will check it and let you know if it still doesn't work for some reason.

 

[Nitros]

nYXem,

Thanks for the screenshot! Now I see the issue! Probably somebody else's, too... this would explain a lot You need to check the box that says 'At the following interval'. Otherwise, automation is NOT enabled.

Best regards,

Jrim Software

Actually I think it would be a good idea to automatically turn on that option when time is being selected by user.

 

[dusantc]

give mee i wil test it on windows 7 64 bit i will test everything.

 

[Jrim_Software]

Actually I think it would be a good idea to automatically turn on that option when time is being selected by user.

It is already in the next version to disable everything below the automation box if the 'enable automation' box isn't checked.

give mee i wil test it on windows 7 64 bit i will test everything.

http://proxy.jrimsoftware.com/download