Permanently Closed Marketplace Sales Thread

[jimbobo2779]

When i updated NHSEO to 1.6.9.0 then it asked me for login details again. But thistime it does not accept it at all?

I am running it on MAC Mini in a VirtualBox on Win7.

Any ideas?

BTW: The huge database loads on MAC Mini in about 4 minutes instead of 20 minutes on my laptop ;-).

Loading up time is mostly hard drive speed and it could be that the mac mini has a faster hard drive than your other laptop.

What does it say when it does not accept your login details? It is likely you already have your license attached to two machines, if so you will need to email me at support at nohandsseo.com and Ill reset it for you.

Any idea why my profiles freeze after a while? I've run two different profiles over the course of 48 hours, and although they both got decent submissions (100-150 confirmed links), I realised that they have frozen and had no activity for over 12 hours. No errors or anything.. they're still 'active', just not activity in the log.

What does it say in the log when it is posting? Are you running the latest version? If not try updating to v1.6.9

 

[Abstroose]

What does it say in the log when it is posting? Are you running the latest version? If not try updating to v1.6.9

Yes, I'm running v1.6.9. The last entry in the log says, '11/14/2011 2:07 AM | Updated profile: XX'. The status bar is moving, and reads, 'Updated profile: XX'.

It's as if it's still working.. just no new log entries or links.

 

[uggoza]

I'd like to know what is the use of proxy, or let me ask another way, what would be the harm if I do not use proxy?

p.s. In my country all IPs are dynamic.

 

[jimbobo2779]

Yes, I'm running v1.6.9. The last entry in the log says, '11/14/2011 2:07 AM | Updated profile: XX'. The status bar is moving, and reads, 'Updated profile: XX'.

It's as if it's still working.. just no new log entries or links.

Are you using any proxies? If you are using proxies in NHSEO please turn them off.

I'd like to know what is the use of proxy, or let me ask another way, what would be the harm if I do not use proxy?

p.s. In my country all IPs are dynamic.

Proxies can help with approval rates though they certainly don't guarantee it. When limiting by PR proxies are a must but other than that they don't have a major bearing on the amount of links you will get.

 

[Tony Stark]

Why does NHSEO take 5-10 minutes to start up?

 

[GraveDigger00]

Why does NHSEO take 5-10 minutes to start up?

It shouldn't, when you see the black logo screen, you can click on it and it starts in.

Just bought it today after my trial, and it really is a great program. Just a couple of quick things. First, I didn't see it anywhere, maybe I missed it, but people should know that it's an order from a different country, my bank had that country blocked by default, I needed to call them for it to go through. Everyone should know that before they order, just in case they need to give a bank a heads up, lift a blocked country.

The other thing is, I know it depends on the keywords for the scraping for places to post, but it seems to get confirmed really slow. I am assuming the more profiles going at the same time, the slower either way, it will go? I have 16 total profiles, and it just seems to crawl for all of them.
Or maybes it's a very low success rate I guess.

Thanks.

 

[jimbobo2779]

Why does NHSEO take 5-10 minutes to start up?

Basically the load up time is dependant on how many profiles, pages and keywords it has to load and how quick the computer(mainly hard drive and processor) is.

It shouldn't, when you see the black logo screen, you can click on it and it starts in.

Just bought it today after my trial, and it really is a great program. Just a couple of quick things. First, I didn't see it anywhere, maybe I missed it, but people should know that it's an order from a different country, my bank had that country blocked by default, I needed to call them for it to go through. Everyone should know that before they order, just in case they need to give a bank a heads up, lift a blocked country.

The other thing is, I know it depends on the keywords for the scraping for places to post, but it seems to get confirmed really slow. I am assuming the more profiles going at the same time, the slower either way, it will go? I have 16 total profiles, and it just seems to crawl for all of them.
Or maybes it's a very low success rate I guess.

Thanks.

The reason it seems slow with the trial is you are limited to 15 threads, with the full version you could have it running at 150 threads. Success rate could also play a factor, what sort of keywords do you have? Random words, none, product based, help based etc?

 

[sqhunter]

I have nhseo on 2 vps installed, 1st server runs only 1 profile - a ytube page.

2nd server i started with one site and added now 6 more profiles.

What happens is that these 2 old sites received links around 800-1000 each in a week or so.. and now they are standstill. I tried with or without keywords, or proxies, restarting program, restarting server. Even the scaped sites are not increasing anymore or the posted ones. Both servers run on 100 threads. The newer profiles on the 2nd server do receive links though, just the oldest site no more and the ytube..

 

[GraveDigger00]

No I have the full version now. I just let it go overnight with about 16 profiles active, and it barely made confirmed links on any of them. This morning I deactivated all but 2, and did a re-scan for keywords, and its cruising right along. So it seems like just a lot of them going at the same time, makes it very very slow. Is it good to re-scan the keywords often?

 

[sneakfreak28]

I got 6.9 version when I update to 6.10 I get an error an essential assembly file could not be found. No hands seo will close. I tried reinstalling it by downloading the latest version on the website but still nothing happens. So right now I'm using 1.6.0 because the latest doesn't work. I don't what is the problem

 

[jimbobo2779]

I have nhseo on 2 vps installed, 1st server runs only 1 profile - a ytube page.

2nd server i started with one site and added now 6 more profiles.

What happens is that these 2 old sites received links around 800-1000 each in a week or so.. and now they are standstill. I tried with or without keywords, or proxies, restarting program, restarting server. Even the scaped sites are not increasing anymore or the posted ones. Both servers run on 100 threads. The newer profiles on the 2nd server do receive links though, just the oldest site no more and the ytube..

I have not seen any instance of the tool just stopping work on any profiles, it is probable the original profiles were websites and as such had links from whois sites. Whois sites have a much higher chance of resulting in a confirmed link than comments or trackbacks.

Are the new profiles not doing anything? For example are they getting comments posted but no confirmed, trackbacks and comments posted but only comments are confirmed.

What version are you running? I have just released v1.6.10 please update to this and then let me know whether you are running the portable or installed version.

No I have the full version now. I just let it go overnight with about 16 profiles active, and it barely made confirmed links on any of them. This morning I deactivated all but 2, and did a re-scan for keywords, and its cruising right along. So it seems like just a lot of them going at the same time, makes it very very slow. Is it good to re-scan the keywords often?

Re-scanning should not be necessary unless the internet connectio ndropped out for an extended amount of time, it certainly shouldn't have much bearing on confirmed links. It is probably just coincidence that the new targets from the earlier keywords have a better %age chance of being auto-approve targets.

Obviously the tool will slow as more profiles are added but there are users with (literally) hundreds of profiles without an issue, it just spreads the workload. There should be no extra loss in speed by adding more profiles (in fact 10-20 profiles generally runs better than 1-9 profiles on half decent computers).

I got 6.9 version when I update to 6.10 I get an error an essential assembly file could not be found. No hands seo will close. I tried reinstalling it by downloading the latest version on the website but still nothing happens. So right now I'm using 1.6.0 because the latest doesn't work. I don't what is the problem

Is this portable or installed version

 

[sqhunter]

I got 6.9 version when I update to 6.10 I get an error an essential assembly file could not be found. No hands seo will close. I tried reinstalling it by downloading the latest version on the website but still nothing happens. So right now I'm using 1.6.0 because the latest doesn't work. I don't what is the problem

Got the same message on my vps running win server 2008, installed version

 

[jimbobo2779]

There was a corrupted file in the last upload. If you have already updated and are getting the missing assembly file error go to the members area and download either the portable update or the installer (depending on your version type) and reapply the update.

The update has been reuploaded and tested as working on my non work machine.

 

[craigboy4]

I just purchased, now I don't have to pay anyone to create worthless backlinks that don't bring me any traffic

 

[Abstroose]

Are you using any proxies? If you are using proxies in NHSEO please turn them off.

Yes, I'm using 25 private proxies. Disabling them really isn't an option for me - I'm not going to spam with IP of my dedi. Surely there must be a workaround for this? Are you saying that you can only use this software for long periods of time without proxies?

 

[jb007uk]

Hi,

Just downloaded the free trial and I can not get it to work as it says no hands error and windows is looking for a solution. Anyone get this/

Thanks - J

 

[StarkContrast]

Jim,
I was also having a problem getting the app to work properly. I shut it down last night, went to restart it today and it just sits there in the bar on the bottom right (after clicking on the black screen). I went to the members' site and reinstalled it but again the same problem. I have a new machine with 4gb ram. I actually had the problem before the upgrade too only it took forever to load, as someone already said on here. Otherwise I believe it's still dropping links like it should. It's a great set and forget tool.

 

[GraveDigger00]

It look like there is an update, hopefully that will take care of some issues. Mine seems to not really be building anything now. It also seems to not be relevant at all to the keywords, the links seem all over the place.

 

[mzk23]

Does No Hands SEO supports only Wordpress or is it possible to put in "Blog Commenting" tab for ex. Blog Engine footprints and start commenting Blog Engine blogs?

 

[jimbobo2779]

Yes, I'm using 25 private proxies. Disabling them really isn't an option for me - I'm not going to spam with IP of my dedi. Surely there must be a workaround for this? Are you saying that you can only use this software for long periods of time without proxies?

I meant to run it without proxies for a short while to see if it worked without them, if so then there is a problem with the proxies. If you want to PM me Team Viewer details I will log in and find out what is happening.

Does No Hands SEO supports only Wordpress or is it possible to put in "Blog Commenting" tab for ex. Blog Engine footprints and start commenting Blog Engine blogs?

Only the bundled footprints are guaranteed to work, it is not advised to change the footprints unless you know what you are doing.

Hi,

Just downloaded the free trial and I can not get it to work as it says no hands error and windows is looking for a solution. Anyone get this/

Thanks - J

Most likely you need .NET2.0 installed or if you have that (or higher) installed try downloading the latest version, I had to re-upload it due to a corrupt file. It is possible you downloaded it in the hour or two gap where the installer had the corrupt file.

Jim,
I was also having a problem getting the app to work properly. I shut it down last night, went to restart it today and it just sits there in the bar on the bottom right (after clicking on the black screen). I went to the members' site and reinstalled it but again the same problem. I have a new machine with 4gb ram. I actually had the problem before the upgrade too only it took forever to load, as someone already said on here. Otherwise I believe it's still dropping links like it should. It's a great set and forget tool.

If you have thousands of pages and keywords and your hard drive is not quick it will take a while. NHSEO is very dependant on the hard drive as it loads all of your profiles (including all pages and keywords), if it doesn't appear to be loading it almost certainly is and will if given the time to load all of the information.

It look like there is an update, hopefully that will take care of some issues. Mine seems to not really be building anything now. It also seems to not be relevant at all to the keywords, the links seem all over the place.

NHSEO will find pages from Bing based on what it deems is relevant to the keywords you entered. If you want only very relevant results just uncheck the broad search checkbox so it is not doing a broad search. This will ensure your long tail keywords result in more relevant targets.