Anybody using No Hands SEO?

[Armi2009]

How many threads are you running? Proxies?

I didn't use any proxies and I used 50 threads which my machine and connection can easily handle.

 

[saladfingers]

Hey Jimbo, if I get a lot of "Failed: Blog Comment Form Not Found" and "Failed: Blog Commend No Forms" how can I make it detect the forms it's not seeing? I've gone in, verified these blogs and commented successfully manually so I know it's a postable blog.

Any ideas?

 

[camo090]

Same problem here, i used NHS and it says 500 posted for each 5 profiles....but with the checklink of scrapebox it says "0 results".......how is this possible? Not even one ? i run 50 to 150 proxy.... Can anyone explain me what's happening?

Thank you!

 

[jimbobo2779]

I've been checking links that have been approved according to the profile page, but when I do the actual link check and visit the URL, it's not there.

What do the comments look like when it's posted?

If the link is found the link is there. The easiest way to check manually, which is just not a great idea as it is so time consuming, you should do the following:
1) load the page
2) View the source of the webpage
3) Search for the domain (domain.com NOT http://www.domain.com/index.php)

If you do this you will see that there is a link on the page.

should trackback progress look like 110390/25754

I was seeing repeated attempts at trackback urls in the logs for a while.

Just trying to understand what it is doing.

As V1.6 was basically a rewite of all of the main engine code some things were not completely stable last week and this is why some profiles were tracking high numbers, it was a bug and this is why you were having the issue and not now. All should be good now in that respect.

Im running the program on my laptop and pc, and can easily acheive about 400 confirmed links on each within the first 24 hours. However after the first 24 hours the amount of confirmed links plumetts to to about 20 confirmed links every 24 hours. Why would this be ?
The best way to use this program seems to be to replace the keywords every 24 hours.

I'm experiencing exactly the same scenario even though I'm targeting a pretty broad niche.

If you are referring to website profiles this is 100% normal. When you are posting websites it will submit it to loads of whois websites and these have a very high chance of being approved but there are only a set amount of them. this is why you see lots at first and then less as time goes on. If you run the profile wait till whois are fully submitted, remove profile and enter again you are essentially posting over and over to the same whois sites and wasting posting time.

In my experience the chance of getting approved comments and trackbacks is actually much higher as time goes on.

Hey Jimbo, if I get a lot of "Failed: Blog Comment Form Not Found" and "Failed: Blog Commend No Forms" how can I make it detect the forms it's not seeing? I've gone in, verified these blogs and commented successfully manually so I know it's a postable blog.

Any ideas?

As I said in the other thread PM me a list of some of these blogs and Ill look into it for you but it is more than likely that these pages have just timed out, if it times out the page will not be viewable by NHSEO and therefore will be seen to not have a trackback link or comment form.

Same problem here, i used NHS and it says 500 posted for each 5 profiles....but with the checklink of scrapebox it says "0 results".......how is this possible? Not even one ? i run 50 to 150 proxy.... Can anyone explain me what's happening?

Thank you!

When posted the link is encoded to be URL safe, this is done for correctness. It is also possible NHSEO has submitted a deep link and you are checking for a specific link. There are many reasons you could be seeing this happen tbh but as I have nothing to do with SB I cannot give advice on how to use it.

I just purchased NHS and let it run for a couple of hours for 10 pages of my website (10 profiles). When looking at the Profiles tab it shows 50k comments posted and 500 links confirmed. However when I do a check with the link checker for all blog comments and all trackbacks and afterwards check for confirmed comments/trackbacks only, NHS only shows around 100 links.

So my question is, which link count can I trust? And another weird thing is that for trackbacks it doesn't show a single confirmed link. All my links seem to come from blog comments only. All I did was using the default settings without any proxies.

I'm not saying that the software is bad in what it does. Quite contrary, I really like it! But it seems there's still a a bug or two left in the code.

What could be the reason for the different link counts? Is anyone else experience this?

There appears to be a bug in the way posts are being tracked, the figure in the profiles list is quite accurate (obviously comments / trackbacks can be taken down) but at the minute some users are seeing the posted link for trackbacks not being saved properly. This means when you run the link checker it is looking for a URL that is 0 characters long, this returns a not found.

I am going to have this fixed and in an update tomorrow morning, I will change the checker so it can check for the URL even when it hasn't been tracked properly.

anyone else experiencing the program hanging when you click stop? When I press stop the green play button never comes back on?

You just have to wait for the threads to finish posting, this can take a minute or two, especially if lots of threads are running, as it says in the Log.

 

[wallstreeter43]

Hello Jimbobo, great software
　
I have a few more questions as far as adding auto approve blog lists to nohandsseo.

How can I delete a blog list that I added into nohandsseo?

Is the "add multiple pages to a single profile" button for adding inner pages from our site or can we also add completely different websites into this?

Also if Im running 5 different profiles and I deactivate 4 of the profiles will those 4 profiles be deleted forever or will their info still be there when I reactivate them again? The reason why I ask this is because I want to add niche auto approve blog lists for each of my sites. Will this do the trick?

Also in my log when I added a blog list and ran the software it kept on saying no file form(or was it file form?)
Thanks

 

[jimbobo2779]

Hello Jimbobo, great software
　
I have a few more questions as far as adding auto approve blog lists to nohandsseo.

How can I delete a blog list that I added into nohandsseo?

Is the "add multiple pages to a single profile" button for adding inner pages from our site or can we also add completely different websites into this?

Also if Im running 5 different profiles and I deactivate 4 of the profiles will those 4 profiles be deleted forever or will their info still be there when I reactivate them again? The reason why I ask this is because I want to add niche auto approve blog lists for each of my sites. Will this do the trick?

Also in my log when I added a blog list and ran the software it kept on saying no file form(or was it file form?)
Thanks

Target handling hasn't been finished yet so if you add a bad list you will just have to wait for it to finish posting.

You can add whatever pages you want to the multiple page profile. If you deactivate you can reactivate and you won't save anything. What do you mean about the bit about file form? If the list has one blog per line and nothing else it should have no issues loading a text file.

 

[swheat]

You just have to wait for the threads to finish posting, this can take a minute or two, especially if lots of threads are running, as it says in the Log.

I have 3 profiles running. When I click stop my CPU usage shoots up to 100%. I have been patient and waited more than ten minutes for it to stop gracefully but it hasn't yet..

I am also not sure if the posting comments is working because all profiles are stuck on the confirmed comments count. The log brings up a lot of failed attempts still.

screenshot -

 

[jimbobo2779]

I have 3 profiles running. When I click stop my CPU usage shoots up to 100%. I have been patient and waited more than ten minutes for it to stop gracefully but it hasn't yet..

I am also not sure if the posting comments is working because all profiles are stuck on the confirmed comments count. The log brings up a lot of failed attempts still.

I sid profiles or threads, if you are running more threads than your computer / internet connection can handle it can do this, I will look into it though you may want to ease off on the number of threads.

Also I cannot do anything about your comments "not posting" without more information. Without information about what pages are being failed etc I cannot do anything to figure out why. It is probably just because the old version never stated if a comment or trackback was failed so you are only just noticing it now as it never mentioned it before, I am considering taking it out again as peoples perception is that it is failing on a lot more than it is.

 

[marcus7777]

 

[jimbobo2779]

 

[kaooo]

Hello
I tried but
I didn't had result with this...

 

[swheat]

I sid profiles or threads, if you are running more threads than your computer / internet connection can handle it can do this, I will look into it though you may want to ease off on the number of threads.

The Max Threads have been on default I will try lowering it but my connect can handle more

. I think there is a typo on your rough guide table -
2Mb / 2Mb 50 to 75
should be?
20Mb / 2Mb 50 to 75

Also I cannot do anything about your comments "not posting" without more information. Without information about what pages are being failed etc I cannot do anything to figure out why. It is probably just because the old version never stated if a comment or trackback was failed so you are only just noticing it now as it never mentioned it before, I am considering taking it out again as peoples perception is that it is failing on a lot more than it is.

OK I didn't know the older version didn't displayed 'failed ...' in the log.

I have just upgraded to 1.6.5 from 6.4. I will let this run for the time being.

*edit

Still not closing after waiting a fair amount of time..

Win 7 64bit.. Should I just uninstall everything and start again?

 

[swheat]

If the link is found the link is there. The easiest way to check manually, which is just not a great idea as it is so time consuming, you should do the following:
1) load the page
2) View the source of the webpage
3) Search for the domain (domain.com NOT http://www.domain.com/index.php)

If you do this you will see that there is a link on the page.

You can view the source by adding view-source: before a URL like this - view-source:www.google.com then control + f to find your link..

 

[revekozu]

Thanks for all the answers

 

[marcus7777]

 

[JakkOne]

Hey Jimbobo, Great software! Had the trial for a few days and got the full version yesterday. Really pleased with the purchase! Got some proxies going and let 'err rip, 150 backlinks in 3 hours of running the program. Really impressed with the relevancy of sites the programs finds to post to as well.

In your opinion, is it best to have a huge list of keywords or more targeted ones?

big thanks

 

[jimbobo2779]

 

[vulzala]

Upgraded from v1.6.0 to v1.6.4. I am now trying to update to v.1.6.5 but it says:

Your login details could not be found.
.......

I add my login details and it keeps saying they are incorrect.
I upgraded to version 1.6.4 correctly and accessed the members area correctly....

 

[jimbobo2779]

Upgraded from v1.6.0 to v1.6.4. I am now trying to update to v.1.6.5 but it says:

Your login details could not be found.
.......

I add my login details and it keeps saying they are incorrect.
I upgraded to version 1.6.4 correctly and accessed the members area correctly....

Only reason I can think of that this would happen is if the database is somehow corrupt, been deleted, the tool is running already or it was running when you installed.

If you restart your computer that will close all possibly open versions and negate the effect of the tool being open while installing / updating. You can check the database is in the right place by going to your My Documents folder and then into your No Hands SEO folder and check that there is a file there named DATABASE.db3.

I would think that just restarting your computer will get it working again.

 

[vulzala]

Only reason I can think of that this would happen is if the database is somehow corrupt, been deleted, the tool is running already or it was running when you installed.

If you restart your computer that will close all possibly open versions and negate the effect of the tool being open while installing / updating. You can check the database is in the right place by going to your My Documents folder and then into your No Hands SEO folder and check that there is a file there named DATABASE.db3.

I would think that just restarting your computer will get it working again.

Restarting didnt work and the database was correct. I downloaded the installer from the members area and now it works fine.