Anybody using No Hands SEO?

[jimbobo2779]

I have just increased the machine limit on each licence to 2 so now if you have a VPS you can have it running on there and your home/work PC. Hope this helps guys.

 

[supahsmooth]

I have just increased the machine limit on each licence to 2 so now if you have a VPS you can have it running on there and your home/work PC. Hope this helps guys.

Thank you very very much! One on my laptop and one on my desktop

NHS for the win...

 

[tomtom86]

Just wanted to clarify, if we leave no anchor text NHSEO will use the name file for anchor text?

 

[jimbobo2779]

Just wanted to clarify, if we leave no anchor text NHSEO will use the name file for anchor text?

No. Don't leave your anchor text empty. Anchor text is the link text which is what is used by search engines to determine what content is on your site and therefore what you should be ranking for. Actually if you leave it empty NHSEO will prompt you for an anchor text.

If you leave your anchor text empty with this or any other ranking tool/method you will be wasting your time and gaining very little in rankings. I would advise you enter in (preferably using spintax) your desired keywords / phrases that you want to rank for.

 

[tomtom86]

No. Don't leave your anchor text empty. Anchor text is the link text which is what is used by search engines to determine what content is on your site and therefore what you should be ranking for. Actually if you leave it empty NHSEO will prompt you for an anchor text.

If you leave your anchor text empty with this or any other ranking tool/method you will be wasting your time and gaining very little in rankings. I would advise you enter in (preferably using spintax) your desired keywords / phrases that you want to rank for.

Yea I just want to play around a little and see how it effects stick rates. I'm using it to backlink to articles / web 2.0's that point to my money sites, so correct anchor text is less of a worry!

Seem to be struggling to get decent stick rates. I've loaded it up with some fresh comments, I'm using 10 proxies and we've just had a 100mb internet connection put in.

I'm running 80 threads on a fairly underpowered computer, could this cause the system to not post properly?

 

[internetmoneyco]

i need the coupon please because it is not $77. it is now over $100. Please respond, thanks.

 

[jimbobo2779]

Yea I just want to play around a little and see how it effects stick rates. I'm using it to backlink to articles / web 2.0's that point to my money sites, so correct anchor text is less of a worry!

Seem to be struggling to get decent stick rates. I've loaded it up with some fresh comments, I'm using 10 proxies and we've just had a 100mb internet connection put in.

I'm running 80 threads on a fairly underpowered computer, could this cause the system to not post properly?

It could be that the system is not quite upto it but with a 100mb connection I would imagine it is not too bad. Memory could become an issue after a while but I have been going through that code so it should reduce memory by a lot.

i need the coupon please because it is not $77. it is now over $100. Please respond, thanks.

It is not over $100 at all. The website has it for $97, if your location requires you to pay a VAT style tax then change your location / currency till it shows no VAT. Also the $77 page is listed in here but I will mention it again to save confusion:
http://nohandsseo.com/BHW.php

I hope that helps. If you have any issues you can always post here, PM or email me.

 

[ppcmaster]

Looks like a real savior, backlinking can't be easier than this

I just need to hear about the results and I will be happy to pick it up...

 

[jimbobo2779]

Looks like a real savior, backlinking can't be easier than this

I just need to hear about the results and I will be happy to pick it up...

There have already been lots of testimonials here and on other forums. All the testimonials from the website are 100% genuine and unprompted. Just because people are so skeptical and don't wanna read the whole thread I have quoted a few words from some people just from the last two pages of this thread:

I bought this tool and I find it really amazing. Recently, I have been looking for a way to automate my scrapebox blasts but could find none. And then I stumbled upon this thread.

Now, the tool is doing just what I want i.e. putting my comment link building on autopilot.

It just really needs the ability to export the confirmed comments, otherwise awesome soft.

This is added now.

I've had this running 24/7 for several days now, probably five days if memory serves me right.

There have been no issues whatsoever with this, it couldn't be more simple to use. It's truly set and forget, really.

I can't say how much I LOVE this tool! The ability to hit 'Play' and leave it running in the background has allowed me to double my productivity at work. No longer do I have to manually set anything up with SE nuke/ SE Robot, etc. This tool scrapes, and does EVERYTHING for you. Had somewhat of a good 'FOUND' ratio when I checked it this morning. And I'll check again tomorrow to see if the non-AA blogs approved the comments and will update these numbers.

729 'Found'/ 5751 'Posted'.

I just uploaded v1.3.3. This is a small update but it does include an updater to make it easier to check you have the latest version and update when needed, no need to check the blog or members area regularly. Update notes are below:
â–  Added: Option to output confirmed links to .txt file
â–  Added: Loader / Updater to make it easier for installing updates

Let me know how it goes guys.

 

[no4h~]

I just uploaded v1.3.3. This is a small update but it does include an updater to make it easier to check you have the latest version and update when needed, no need to check the blog or members area regularly. Update notes are below:
â–  Added: Option to output confirmed links to .txt file
â–  Added: Loader / Updater to make it easier for installing updates

Let me know how it goes guys.

My login keeps bouncing back with incorrect login On the client, but works just fine on the site.

What's up?

 

[Lanx]

Looks like a real savior, backlinking can't be easier than this

I just need to hear about the results and I will be happy to pick it up...

just read through the thread and you'll find results, i've been running it practically 24/7 since jimbo made a bhw special and my oldest profiles have like 400-500 confirmed (by the software not me) links and the newest ones get quite a bit too, there are probably even more confirmed (since i don't think it can keep up finding all the confirmed from before that feature was implemented, i'm thinking backlog) but i don't want to try to find out, since well i want this program to be hands off, i just want it to run, in fact i'm gonna upgrade to the latest version now since it can export confirmed links now...
gee what does that mean?
congrats no handsseo now became an automatic 24/7 AA program. I now have 400(confirmed give or take) x 20(profiles) 8,000 AA links by doing nuttin, now if Jimbo makes it even easier to export all these links into one file or selection all the profiles and extract that way instead of going to each profile, that's even easier!

 

[jimbobo2779]

My login keeps bouncing back with incorrect login On the client, but works just fine on the site.

What's up?

Because the server was up and down at the beginning of the week I messed around with the login script. I am uploading the fix now. Will post back when it is uploaded, you will be able to get teh update either via the members area or the Loader.

I'm really sorry about this guys, it will be fixed very soon.

*UPDATE* New working version should be downloadable from the new Loader app that comes with the tool. Uploading to the members area now.

**UPDATE2** Working version is downloadable via loader AND members area now.

I'm really sorry for the silly mistake guys

 

[tomtom86]

729 'Found'/ 5751 'Posted'

I'm getting more like 20 confirmed comments from 2000 posted.

Not sure what I'm doing wrong. I've got 100mb connection, NOHANDSSEO seems to be running without any issues (after many hours it seems to use up all system memory but I just restart it then).

I've tried using the default comment file and I've also tried one of my own but I did not notice any difference to be honest in stick rates.

I have only put one keyword in each profile I am running - I presumed this would not matter as the system seems to just find new keywords anyway...

I'm using my database file that I've had since 1.0 as I did not want to setup my profiles again, have any changes been made that would require me to make a new .db?

Am I missing something, help would be greatly appreciated.

Tom

 

[no4h~]

Because the server was up and down at the beginning of the week I messed around with the login script. I am uploading the fix now. Will post back when it is uploaded, you will be able to get teh update either via the members area or the Loader.

I'm really sorry about this guys, it will be fixed very soon.

*UPDATE* New working version should be downloadable from the new Loader app that comes with the tool. Uploading to the members area now.

Awesome, thank you!

Any chance in future versions you'll be able to right click a page/website and re-verify all comments? A lot of the Non-AA blogs could have approved the comments days after the tool ran.

Also any thoughts on forum registrations, and/or social bookmarking (digg, etc.) in the future?

729 'Found'/ 5751 'Posted'
I have only put one keyword in each profile I am running - I presumed this would not matter as the system seems to just find new keywords anyway...
Tom

Why not try adding more keywords by default?

These are my current projects (I removed my projects a few updates back..)

 

[Derviie]

Hey Jimbo! For the links posted, am I able to adjust them to a specific amount of OBL's? Also, am I able to retrieve all posted links so I may run them through Scrapebox's link checker? This tool looks great, and I'm thinking of buying it soon. Does it use a ton of resources while It's running? I plan to run this on my home PC rather than buying a VPS. Lastly, does it post less or use the same lists when running multiple campaigns, or are they targeted blogs?

 

[jimbobo2779]

729 'Found'/ 5751 'Posted'

I'm getting more like 20 confirmed comments from 2000 posted.

Not sure what I'm doing wrong. I've got 100mb connection, NOHANDSSEO seems to be running without any issues (after many hours it seems to use up all system memory but I just restart it then).

I've tried using the default comment file and I've also tried one of my own but I did not notice any difference to be honest in stick rates.

I have only put one keyword in each profile I am running - I presumed this would not matter as the system seems to just find new keywords anyway...

I'm using my database file that I've had since 1.0 as I did not want to setup my profiles again, have any changes been made that would require me to make a new .db?

Am I missing something, help would be greatly appreciated.

Tom

You are correct about the system finding keywords, it uses search engine suggestions to get more keywords that are also relevant to your niche, more keywords is better but more for the longevity of a profile as opposed to approval rate. I have found keyword groups that have had short runs of 5% approval and some that have had extended periods of less than 0.5%, with an average being about 1-2%. I generally find the less technical a keyword is the higher the approval rate is though there is definitely a lot of luck involved with getting higher stick rates.

The answer to higher stick rates will always be quality auto-approve lists I'm afraid, if you are wanting to guarantee high percentages then that is the way to go. As other users have said though this tool is literally finding AA blogs for you so if you run lots of profiles (with different keywords) you will essentially be building your own AA list.

Do not change the database, not much if anything has changed with it in a while, I hate the thought of my users having to empty out their DB and start again so if a DB update is ever needed it will be handled by the app.

Awesome, thank you!

Any chance in future versions you'll be able to right click a page/website and re-verify all comments? A lot of the Non-AA blogs could have approved the comments days after the tool ran.

Also any thoughts on forum registrations, and/or social bookmarking (digg, etc.) in the future?

Why not try adding more keywords by default?

These are my current projects (I removed my projects a few updates back..)

Thanks for the image. A link checker of past posts will be possible, updates have been slow the past couple of weeks due to server issues (hopefully cleared up now) and Im getting ready for a bit of a launch so Ive been getting some promo materials ready and a bonus or two (these WILL be available for all users from the members area download page), this will hopefully clear me up for more updates and stuff like that.

My priority updates are pretty much a full link checker and a system to set anchor text per page so hopefully I can get them cranked out soon as they seem like they would be popular additions.

For right now I am just trying to perfect the blog posting side of things before branching out into other big platforms like that though I do have code from other tools that could be used to add this functionality without too much hassle, my only issue with it is the extra work involved in a user setting up this functionality and the added cost involved for a user. It is definitely something I am very interested in including when I feel the tool is ready for such an update, you can be sure the price will go up from what it is now though, obviously with previous users getting it for no extra charge. With that said I would imagine it is a little way off yet, don't want to get your hopes up thinking it will be in two weeks.

Hey Jimbo! For the links posted, am I able to adjust them to a specific amount of OBL's? Also, am I able to retrieve all posted links so I may run them through Scrapebox's link checker? This tool looks great, and I'm thinking of buying it soon. Does it use a ton of resources while It's running? I plan to run this on my home PC rather than buying a VPS. Lastly, does it post less or use the same lists when running multiple campaigns, or are they targeted blogs?

There is a control for setting the maximum number of outbound links and the minimum PR, if either of these is met or exceeded it moves on and does not post. You can export the links all together or separately output the whois posts, trackback posts, comment posts and the confirmed links for further verification / promotion.

If you have lots of profiles (a profile is a website, a webpage or a group of webpages depending on how it is set) such as 20+ it can use quite a bit of memory after being run for about 100hours straight, however the memory usage is something I am working on as part of the next update and this will bring it down vastly.

The profile target lists are kept separate, providing you do not use exactly the same keywords, so you do not need to worry about overlap between the profiles.

I am sorry if I have missed any questions guys. I will be back soon to answer any more people may have.

 

[no4h~]

You are correct about the system finding keywords, it uses search engine suggestions to get more keywords that are also relevant to your niche, more keywords is better but more for the longevity of a profile as opposed to approval rate. I have found keyword groups that have had short runs of 5% approval and some that have had extended periods of less than 0.5%, with an average being about 1-2%. I generally find the less technical a keyword is the higher the approval rate is though there is definitely a lot of luck involved with getting higher stick rates.

The answer to higher stick rates will always be quality auto-approve lists I'm afraid, if you are wanting to guarantee high percentages then that is the way to go. As other users have said though this tool is literally finding AA blogs for you so if you run lots of profiles (with different keywords) you will essentially be building your own AA list.

Do not change the database, not much if anything has changed with it in a while, I hate the thought of my users having to empty out their DB and start again so if a DB update is ever needed it will be handled by the app.



Thanks for the image. A link checker of past posts will be possible, updates have been slow the past couple of weeks due to server issues (hopefully cleared up now) and Im getting ready for a bit of a launch so Ive been getting some promo materials ready and a bonus or two (these WILL be available for all users from the members area download page), this will hopefully clear me up for more updates and stuff like that.

My priority updates are pretty much a full link checker and a system to set anchor text per page so hopefully I can get them cranked out soon as they seem like they would be popular additions.

For right now I am just trying to perfect the blog posting side of things before branching out into other big platforms like that though I do have code from other tools that could be used to add this functionality without too much hassle, my only issue with it is the extra work involved in a user setting up this functionality and the added cost involved for a user. It is definitely something I am very interested in including when I feel the tool is ready for such an update, you can be sure the price will go up from what it is now though, obviously with previous users getting it for no extra charge. With that said I would imagine it is a little way off yet, don't want to get your hopes up thinking it will be in two weeks.



There is a control for setting the maximum number of outbound links and the minimum PR, if either of these is met or exceeded it moves on and does not post. You can export the links all together or separately output the whois posts, trackback posts, comment posts and the confirmed links for further verification / promotion.

If you have lots of profiles (a profile is a website, a webpage or a group of webpages depending on how it is set) such as 20+ it can use quite a bit of memory after being run for about 100hours straight, however the memory usage is something I am working on as part of the next update and this will bring it down vastly.

The profile target lists are kept separate, providing you do not use exactly the same keywords, so you do not need to worry about overlap between the profiles.

I am sorry if I have missed any questions guys. I will be back soon to answer any more people may have.

Awesome to hear man, I figured as much I just wanted to run it by you to make sure. Looking forward to everything, really. This tool has done such a great job. If you could implement the social bookmarking, and forum stuff, I would honestly use this in place of other tools... potentially pay for yearly updates, too.

Also, any chance we'll be seeing the following?

1. More Footprints.
2. Viewing approved blog comments from within the APP.
3. Settings such as 'EDU/Gov Blogs ONLY'
4. Proxy Harvesting...
5. Updating the 'Block Domains' to allow for import/export URLs

I have more suggestions, I'll leave these here for now :}

 

[jimbobo2779]

Awesome to hear man, I figured as much I just wanted to run it by you to make sure. Looking forward to everything, really. This tool has done such a great job. If you could implement the social bookmarking, and forum stuff, I would honestly use this in place of other tools... potentially pay for yearly updates, too.

Also, any chance we'll be seeing the following?

1. More Footprints.
2. Viewing approved blog comments from within the APP.
3. Settings such as 'EDU/Gov Blogs ONLY'
4. Proxy Harvesting...
5. Updating the 'Block Domains' to allow for import/export URLs

I have more suggestions, I'll leave these here for now :}

Don't say that to the guy who is charging you for something lol

The suggestions are great and Im sure I can work most (if not all) into the tool. Thanks for the suggestions they really will make a difference to the tool.

 

[no4h~]

Don't say that to the guy who is charging you for something lol

The suggestions are great and Im sure I can work most (if not all) into the tool. Thanks for the suggestions they really will make a difference to the tool.

Well I think like a developer as I am one myself, so everybody should be paid for their time. Especially if you save me money, time and efforts of having to use 4-5 programs to get all of my projects done.

I'll have more idea's for you shortly.

 

[tgpycq]

Just paid for it.

Reference: 60968008

The OPs customer service and support cannot be faulted in any way. If only everyone did business like him. He is simply amazing!

I am gonna play around with this now.

Ohh..wait, I haven't got it yet! Still waiting for darn Plimus to process it!