My SEO Blueprint (SENuke, AMR, BMD, Xrumer, Scrapebox)

[FuryKyle]

Cash, don't you think you're overdoing it by pinging all the bookmark URLs and then making a feed for them and pinging them again?

Also, I have a list of 100+ ping sites. Are there any adverse effects by pinging all the URLs all in one go (pinging the same site with so a 100+ different sites continuously) and do I use them to ping every URL I bookmarked? Like you said, it does take ages.

Thanks

 

[cash202]

edthered,

This blueprint is so uber powerful you really only need to use about 20% of it to start off with and rank at the top if you really do your keyword research properly...which most people don't.

Step 1. Buy Micro Niche Finder, and start out only writing articles with competition less than 50 and traffic higher than 500 phrase match, then upload them to your site. First write articles relating to keywords of "buyers" like words with system or software or course, then if you run out of those move to non buying words, which at least "may" buy, but could also click on adsense.

Step 2. "get" another article whether PLR or any other "quick" means.

Step 3. Buy The Best Spinner and spin the article.

Step 4. Hire a gig on Fiverr.com and submit the spun article for distribution (with your resource box at the bottom of course.

These steps alone should get your page to the top of results, as the competition is low.

If you need another step just hire another fiverr web 2.0 gig with the same spun article. If you need more just hire a scrapebox comment gig and send those comments to the web 2.0 sites.

He was saying 3K+ BLD which is not the SEO competition but number of
domains that link to the competitor sites. Working to blueprint will not
increase the number of linking domains much since we are linking to the
same Web 2.0 and to the limited number of article directories.

To increase BLD I'd submit to as many web directories as I could with Sliq
Submitter or just paid someone to submit. You can get a 1000+ extra domains
this way. Then AMR blast should theoretically give you another few hundreds
of domains.

 

[cash202]

cash 202 - do you use pc, vps or dedicated server to run Xrumer, amr, bd, sb, senuke. What would be the best option? please elaborate.

I have a German VPS now and 25 Romanian proxies. VPS is Windows 2008 R2,
1.5Gb RAM. The connection between Germany and Romania is much better
than between USA and Romania so everything works faster.

I was using a trusted provide for XRumer. Now I use VenomSEO. It is not
anywhere as good as XRumer yet but is a very close approximation. The
difference is XRumer solves CAPTCHAs locally on server and you need hell of
a hardware to do it (dedicated server) and VenomSEO solves them in a cloud
or something like that. Pretty fast and it doesn't load you VPS processor much.

 

[cash202]

Cash, don't you think you're overdoing it by pinging all the bookmark URLs and then making a feed for them and pinging them again?

Also, I have a list of 100+ ping sites. Are there any adverse effects by pinging all the URLs all in one go (pinging the same site with so a 100+ different sites continuously) and do I use them to ping every URL I bookmarked? Like you said, it does take ages.

Thanks

I don't make feeds from bookmark URLs. Only from Web 2.0 and AMR live links.
All my pinging (except BMD) is happening on server in multi-threaded
application now so it doesn't bother me much.

With BMD you probably don't need 100+ sites to ping. Pick the best ones.

http://audiorpc.weblogs.com/RPC2
http://blog.goo.ne.jp/XMLRPC
http://blog.with2.net/ping.php
http://blog.youdao.com/ping/RPC2
http://blogsearch.google.com/ping/RPC2
http://blogstreet.com/xrbin/xmlrpc.cgi
http://geourl.org/ping
http://godesigngroup.com/blog/feed
http://imblogs.net/ping
http://ping.fc2.com
http://ping.gpost.info/xmlrpc
http://ping.kutsulog.net
http://rpc.blogbuzzmachine.com/RPC2
http://rpc.blogrolling.com/pinger
http://rpc.feedsky.com/ping
http://rpc.odiogo.com/ping
http://rpc.pingomatic.com
http://rpc.technorati.jp/rpc/ping
http://rpc.urlfan.com
http://rpc.weblogs.com/RPC2
http://serenebach.net/rep.cgi
http://syndic8.com/xmlrpc.php
http://wasalive.com/ping
http://www.bloglines.com/ping
http://www.blogstreet.com/xrbin/xmlrpc.cgi
http://www.feedsky.com/api/RPC2
http://www.i-learn.jp/ping
http://www.imblogs.net/ping
http://www.pheedo.com/api/rpc
http://www.twingly.com/ping
http://www.wasalive.com/ping
http://www.xianguo.com/xmlrpc/ping.php
http://www.zhuaxia.com/rpc/server.php
http://xianguo.com/xmlrpc/ping.php
http://xmlrpc.bloggernetz.de/RPC2

 

[PHustler]

I was just searching for a list like this. Thanks

I don't make feeds from bookmark URLs. Only from Web 2.0 and AMR live links.
All my pinging (except BMD) is happening on server in multi-threaded
application now so it doesn't bother me much.

With BMD you probably don't need 100+ sites to ping. Pick the best ones.

 

[FuryKyle]

Thank you so much for the list
You don't use BMD for pinging anymore?

 

[cash202]

Thank you so much for the list
You don't use BMD for pinging anymore?

I use BMD for pinging BMD submissions, not for all the pinging there is.

 

[bikerboy]

1) Oh yeah, do you switch out and switch in between proxies when you log into different Web 2.0s (manual with videos)?

2) And do you use RoboForm or do you really do everything manually when it comes to these Web 2.0 with videos?

3) Why didn't you use Magic Submitter to do this? Or is it because the software doesn't allow video embedding?

-bikerboy

 

[edthered]

edthered,

This blueprint is so uber powerful you really only need to use about 20% of it to start off with and rank at the top if you really do your keyword research properly...which most people don't.

Step 1. Buy Micro Niche Finder, and start out only writing articles with competition less than 50 and traffic higher than 500 phrase match, then upload them to your site. First write articles relating to keywords of "buyers" like words with system or software or course, then if you run out of those move to non buying words, which at least "may" buy, but could also click on adsense.

Step 2. "get" another article whether PLR or any other "quick" means.

Step 3. Buy The Best Spinner and spin the article.

Step 4. Hire a gig on Fiverr.com and submit the spun article for distribution (with your resource box at the bottom of course.

These steps alone should get your page to the top of results, as the competition is low.

If you need another step just hire another fiverr web 2.0 gig with the same spun article. If you need more just hire a scrapebox comment gig and send those comments to the web 2.0 sites.

Having experienced a fraction of the power of cash202's blueprint I want more LOL.. I have done many of the steps you've mentioned (via fiverr gigs). The only problem in the first cycle was bookmarking of amr livelinks + scribd+slideshare links. Right now I am doing a second round by using Autopligg to bookmark amr livelinks. I also bought BMD and am using Scritty's instructions to bookmark tier 1 domains (as per cash 202's blueprint). This blueprint required a tremendous amount of work (even with outsourcing some aspects to fiverr) but the results have put a smile on my face. No doubt the second cycle will prove even more rewarding for all the followers of this blueprint. Thanks Cash202.............

 

[edthered]

He was saying 3K+ BLD which is not the SEO competition but number of
domains that link to the competitor sites. Working to blueprint will not
increase the number of linking domains much since we are linking to the
same Web 2.0 and to the limited number of article directories.

To increase BLD I'd submit to as many web directories as I could with Sliq
Submitter or just paid someone to submit. You can get a 1000+ extra domains
this way. Then AMR blast should theoretically give you another few hundreds
of domains.

Bought sliq submitter and submitted to as many directories as possible. I am also outsourcing the directory submission via fiverr gigs to spread the footprint and increase the BLD number as much as possible. Thanks

 

[cash202]

1) Oh yeah, do you switch out and switch in between proxies when you log into different Web 2.0s (manual with videos)?

2) And do you use RoboForm or do you really do everything manually when it comes to these Web 2.0 with videos?

3) Why didn't you use Magic Submitter to do this? Or is it because the software doesn't allow video embedding?

-bikerboy

1) No, I don't.
2) Of course. It would be such a pain in the arse without RoboForm.
3) Because I use SENuke for automated submission.

 

[FuryKyle]

1) No, I don't.
2) Of course. It would be such a pain in the arse without RoboForm.
3) Because I use SENuke for automated submission.

What pinging software do you use besides BMD?

 

[con1337]

What pinging software do you use besides BMD?

pingfarm, bulkping?

 

[cash202]

What pinging software do you use besides BMD?

Custom written by me.

 

[jsk123]

great share. Thankyou

 

[scorpa]

I use one set of Web 2.0 accounts per money site. Then for each
keyword I post new article to the same Web 2.0 property. So, you will
have 5 articles for 5 keywords on each of the 30 Web 2.0 properties
(NOT 5 x 30 Web 2.0 properties).

Hope it makes sense

My question :

I have a 100 page website with each page optimized for ONE keyword. Can I use one set of web 2.0 accounts to promote all the pages, by submitting 100 articles (one article per keyword) to the web 2. 0 sites. Since each article will have anchor text links (keyword) to it's corresponding page on the main website. Can each article page act as a separate web 2.0 property. e.g assuming I am trying to rank for three keywords:
1. iphone
2. blackberry
3. Sony Ericsson

If I am using one squidoo account to promote the keywords and I have already submitted articles optimized for each keyword. If the article links are these...

mysquidoopage/iphone
mysquidoopage/blackberry
mysquidoopage/sonyericsson (sori i can't post links yet)

Can I use each of the squidoo pages as a separate property on it's own since it is optimized for just one keyword and it's also linking to a page on the main site containing the keyword?

 

[elvis1973]

Hi Cash,

Are you still offering this as a service? Will this continue to work for my site well into the future or will I need to continue to work on it? Do we get access to the sites/accounts you create so we can add more content etc.

And finally have you had good feedback on this service so far?

thanks...Lee

 

[elvis1973]

sorry one more thing.

What other paid service on BHW would you recommend using in conjunction with your service. Or is your Blueprint all you need?

 

[fostinwd]

I'm somehow implementing your blueprint..

in your opinion, how many properties is the best number to see results? (web 2.0)

 

[bstsystems]

1. If you think you're gonna rank well for any of those words you're out of your mind.
2. You shouldn't write a page on just 1 keyword. You should write it on a keyword with say 1500+ phrase results, and then 4-5 more very related words with 100+ each

Like
Best iphone apps
Best iphone apps at work
Best iphone apps at home
Best iphone apps for games
Best iphone apps for adults
The very Best iphone apps

My question :

I have a 100 page website with each page optimized for ONE keyword. Can I use one set of web 2.0 accounts to promote all the pages, by submitting 100 articles (one article per keyword) to the web 2. 0 sites. Since each article will have anchor text links (keyword) to it's corresponding page on the main website. Can each article page act as a separate web 2.0 property. e.g assuming I am trying to rank for three keywords:
1. iphone
2. blackberry
3. Sony Ericsson

If I am using one squidoo account to promote the keywords and I have already submitted articles optimized for each keyword. If the article links are these...

mysquidoopage/iphone
mysquidoopage/blackberry
mysquidoopage/sonyericsson (sori i can't post links yet)

Can I use each of the squidoo pages as a separate property on it's own since it is optimized for just one keyword and it's also linking to a page on the main site containing the keyword?