CPA Iframing,

[RealBlackHat]

Damnit, I want to learn how to iframe... I'm such a noob...

is GodCpa all i need to be able to iframe 1st page email submits?

 

[artizhay]

Damnit, I want to learn how to iframe... I'm such a noob...

is GodCpa all i need to be able to iframe 1st page email submits?

Yes, but you can try Cakeslice. Read this thread:
http://www.blackhatworld.com/blackhat-seo/black-hat-seo-tools/224283-free-content-gateway-geotarget-rotate-offers-session-cookies-instructions.html

However, I find GODcpa better for cross-browser compatibility in the slicing.

 

[informacione]

I do a bit of framing in the form of content locks, seamless form integration, pre-populated submits, and others. Let me know if you need any help.

Hello

If you have 5 minutes of time PM me the basics of this trick.

TY

 

[Rasputin78]

Well shoot, I'd hate to see you when you were trying. How about some more solutions and less negativity yeah?

And yes, it is a cracked version I've got here - I'd happily pay for it were it still for sale (and if it actually worked!)

Lastly and only in the interests of putting an end to all this "doing it the white hat way is best" stuff,

a) this is a blackhat forum
b) the offers I'm trying allow iframing
and c) the only reason I'm trying to iframe some of these offers is because their landing page is nasty and I could do a better job myself.

Now back to the more productive side of this thread. In answer to your question artizhay, the forms I wanted to iframe include the input and the button, but I had this issue even with regular web pages.

As much as it pains me to admit it, it may just be a shoddy version of GODcpa I've got here...

Use BHCH it works perfectly , I use BHCB aand Wp re director + Link cloaker ( I dont Iframe Though)
Though i set it all up and its working i still haven't gotten around to driving serious traffic to it.
Search Downloads or PM me will get u a link

 

[pk7677]

off topic but it would be awesome if some one can explaine to me what iframing is. Maybe a Pm? thanks.

 

[silentassassin]

Someone here should start a service for those of us that know what we want but don't/can't do it.

 

[MrMan99]

I'm interested in iframing also. For the people who don't know what it is, its where two sites are loaded at once. It used to be used to navigation of a website. How it was setup is 1 site would load on the left/top that had all the navi links, then the body of the website would be the only thing that changed. I know how to do basic Iframing but I don't know if there should be some extra voodoo in there to stop networks from seeing where the traffic comes from.

I have some ideas about this method. If you are currently using this method and want to chat with me you can PM. Please don't PM me will you setup my iframe, because 1. I don't know if there needs to be some special voodoo. 2. iframing has been around forever google it.

P.S. Here is an example of iframe.[Link removed I can't post them yet] . If you look the box is a 2nd web page loaded inside of a webpage.

The issue I can see with this, not all browser support iframes. So I would imagine if you get some weird browser that clicks on your site it might show the CPA where the traffic is truly coming from.

 

[artizhay]

I'm interested in iframing also. For the people who don't know what it is, its where two sites are loaded at once. It used to be used to navigation of a website. How it was setup is 1 site would load on the left/top that had all the navi links, then the body of the website would be the only thing that changed. I know how to do basic Iframing but I don't know if there should be some extra voodoo in there to stop networks from seeing where the traffic comes from.

I have some ideas about this method. If you are currently using this method and want to chat with me you can PM. Please don't PM me will you setup my iframe, because 1. I don't know if there needs to be some special voodoo. 2. iframing has been around forever google it.

P.S. Here is an example of iframe.[Link removed I can't post them yet] . If you look the box is a 2nd web page loaded inside of a webpage.

The issue I can see with this, not all browser support iframes. So I would imagine if you get some weird browser that clicks on your site it might show the CPA where the traffic is truly coming from.

You're thinking of frames, though iframes can do the same thing, but iframes are usually used to embed a website inline or in a block.

You can use a double meta refresh or something like referer.us to blank the referrer.

Most browsers do support iframes now. No matter what browser, the referrer will always be protected by simple logic - if the browser supports iframes, your frame will go through you DMR or other referer blanking method, but if it doesn't support iframes, the offer never loads so it never gets recorded. You could also get a browser's user agent to see if it might be problem-causing browser, such as a mobile. I think there is also a tag called <noframes> for browser's that don't support frames.

 

[ChanzGrande]

Hey look. It's not hard. It's not difficult to make money doing it, and it's actually not hard to fully cloak the whole exercise as well.

If someone in this thread had problems with accounts in the past, perhaps they would have been better advised to complete their due diligence in advance of constructing a project.

Simplest virtually foolproof method to do this is not hard at all:

1. Use Brad's CPA-R, create a totally WH site/post to use as referrer for your offer.

2. Don't use GodCPA unless you've paid for it. Use the standalone version of cakeslice - the only function you really need from a slicer is to SLICE.

3. Slice the offer THROUGH Brad's CPA-R.

4. Promote it however the hell you want.

* Ancillary step = make sure the offer does not employ frame-breaking technology.

Done!

Real hard, yes? Anyone that says it is harder than that - hasn't done it.

 

[ChanzGrande]

Yes, but you can try Cakeslice. Read this thread:
http://www.blackhatworld.com/blackh...tate-offers-session-cookies-instructions.html

However, I find GODcpa better for cross-browser compatibility in the slicing.

Cross-browser compatibility is not a problem is you simply slice the offer directly through Brad's CPA-R as it works on the majors including IE, FF, Chrome, Safari, Opera and more.

GodCPA is a great all in one solution assuming you are willing to pay for it. I wouldn't take too many chances with the cracked stuff on this as these cracks were specifically developed by existing CPA players who built in solutions to THEIR needs.

 

[ChanzGrande]

Both, it's really bizarre.

The cropping window works correctly, and then when you hit finished cropping and it loads up the preview its offset quite significantly to the right. Same deal when I upload it and view it live.

Using v1.6 if this helps.

If anyone is experiencing frame shifting, the easiest fix is to manually adjust the frame settings after you've sliced it. While this has been relatively rare for me, I have occassionally found the need to physically adjust the settings for the POSITION of the frame.

Usually at a minimum, the frame has the correct dimensions, but is off-center somehow, so simply adjusting the position elements of the frame in the OUTPUT will move it around a bit so to speak. You may have to trial and error it a bit.

Additionally, I have also found that slicing from an alternate browser can make a difference as well. Usually if I slice from IE, and its off - slicing it from FF lines it up correctly.

Hope it helps!

 

[divinity]

Hey look. It's not hard. It's not difficult to make money doing it, and it's actually not hard to fully cloak the whole exercise as well.

If someone in this thread had problems with accounts in the past, perhaps they would have been better advised to complete their due diligence in advance of constructing a project.

Simplest virtually foolproof method to do this is not hard at all:

1. Use Brad's CPA-R, create a totally WH site/post to use as referrer for your offer.

2. Don't use GodCPA unless you've paid for it. Use the standalone version of cakeslice - the only function you really need from a slicer is to SLICE.

3. Slice the offer THROUGH Brad's CPA-R.

4. Promote it however the hell you want.

* Ancillary step = make sure the offer does not employ frame-breaking technology.

Done!

Real hard, yes? Anyone that says it is harder than that - hasn't done it.

What do you mean by:

"Slice the offer THROUGH Brad's CPA-R."

 

[_Bryan_]

What do you mean by:

"Slice the offer THROUGH Brad's CPA-R."

He means that you'll have to set up Brad's CPA-R first, then slice the offer via the redirector, so that you don't get in trouble for having as a referrer the url of a cakeslicer file.

 

[Jason_parker700]

really informative thread guys! Could you all just tell me which network has good email submits.

 

[Ruchka]

Guys I have a paid version of godcpa. I have a simple project I want to set up but lack the required skills. If somebody with good framing skills could benefit from using the paid version for their own needs maybe we can work something out.