[Guide] Get your own dedicated proxies for 0,2€ / proxy

feIix

Regular Member
Joined
Sep 25, 2018
Messages
283
Reaction score
142
In the last days I needed several proxy servers, so I searched for a suitable proxy provider.
However, imho most providers are quite expensive or poor provide quality.

So I searched for a mthod that I can host proxy servers very cheap and on my own. That's the only way I have full control and know that my "dedicated proxy server" will not be re-selled to another customer.

During my research, I came across OVH. There you can rent vServer for 3.56 € per month. You can buy up to 16 ip addresses for a one-time activation fee (2.4€). After that you have 16 (+one free) IP where you can host your proxie servers.

On the Linux vServer you can now easily set up your own proxy server (google for Squid). At this point I do not provide extra instructions, as a vServer is not for noobs with zero administration knowledge.

However, if you have basic knowledge, you can quickly google the instructions.

I've setup over 100 proxie servers in the last few days and they are working like a charm. You can even select the area of your proxie (multiple european and united states).

Just my two cents.
 
Last edited:
Nice info however, since they are datacenter IPs, it might not be helpful for some cases.

But i would absolutely recommend this for scraping, it'll do the job perfectly and quite fastly.
 
In the last days I needed several proxy servers, so I searched for a suitable proxy provider.
However, imho most providers are quite expensive or poor provide quality.

So I searched for a mthod that I can host proxy servers very cheap and on my own. That's the only way I have full control and know that my "dedicated proxy server" will not be re-selled to another customer.

During my research, I came across OVH. There you can rent vServer for 3.56 € per month. You can buy up to 16 ip addresses for a one-time activation fee (2.4€). After that you have 16 (+one free) IP where you can host your proxie servers.

On the Linux vServer you can now easily set up your own proxy server (google for Squid). At this point I do not provide extra instructions, as a vServer is not for noobs with zero administration knowledge.

However, if you have basic knowledge, you can quickly google the instructions.

I've setup over 100 proxie servers in the last few days and they are working like a charm. You can even select the area of your proxie (multiple european and united states).

Just my two cents.


How much would all these add up if you don’t mind me asking
 
Don't forget, most OVH ips already on blacklist on many spam house. So make sure you request to check and delist them.
 
How much would all these add up if you don’t mind me asking

What do you mean? I've mentioned all the upcoming costs in my first post.

Don't forget, most OVH ips already on blacklist on many spam house. So make sure you request to check and delist them.

No problems with the ip adresses since I begin botting.
 
Hi felix, thanks for the guide.

I set up a single squid proxy and added a couple of ip. Could you point me to a guide to add those other ip to the proxy? thanks
 
Just to keep you guys updated: That method is still working.
 
No, you can order it directly from the customer centre.
 
and whats the problem? thats exactly what OP said its 3$(2,4€) one-time-fee
Read it again. 'OVH. There you can rent vServer for 3.56 € per month. You can buy up to 16 ip addresses for a one-time activation fee (2.4€). After that you have 16 (+one free) IP'
 
Read it again. 'OVH. There you can rent vServer for 3.56 € per month. You can buy up to 16 ip addresses for a one-time activation fee (2.4€). After that you have 16 (+one free) IP'
you thought you will get 16IPs for 2,4€? its kinda obv its 2,4€/IP... lol :')
 
Back
Top