GSA Search Engine Ranker - Extremely Powerful Linkbuilding Software (Free 5 Day Trial)

[s4nt0s]

5.55 - fix: issue with engine files having no "page must have" or "url must have"
- fix: minor issues with serengine api
- fix: problem with profile images

 

[-FPC-]

Must have been an incorrect setting. If you end up getting the full version, let me know and I'll help you get it going.



What did your email say after payment? You should have received some kind of notification or message from the payment processor. You payment might not have been deducted yet due to fraud check. This seems to be happening a lot more frequently now. These payment processors are a PITA :/

Not much else I can do except tell you to try one of the payment processors. They work for many customers on a daily basis so it should work for you.

I was very careful about the settings, I don't know what I could have set up wrong. I'm not trying to be a dick or anything but I'm not about to pay for the full version when the main function I want doesn't appear to work.

 

[Renwo]

Loving the program.

I have a question. I installed the program on my main PC and created a project. I want to move the software to another PC which will be dedicated to the program. Can I just install the software on another PC and use my key? And is there a way to export the project I already created (bad words, target urls, keywords, proxies, email accounts, pdf, etc) and then import it on to the other computer?

 

[s4nt0s]

I was very careful about the settings, I don't know what I could have set up wrong. I'm not trying to be a dick or anything but I'm not about to pay for the full version when the main function I want doesn't appear to work.

No problem. But just so anyone else doesn't think there is actually something wrong with the social bookmarks or microblogs, here's a quick test I ran for about 45 minutes. 1200 verified Social Bookmarks and Microblogs. It works great.

Loving the program.

I have a question. I installed the program on my main PC and created a project. I want to move the software to another PC which will be dedicated to the program. Can I just install the software on another PC and use my key? And is there a way to export the project I already created (bad words, target urls, keywords, proxies, email accounts, pdf, etc) and then import it on to the other computer?

Yep you just install the software on the other machine and enter the key. Make sure and don't run it on more then 1 machine at a time.

To backup the projects you can right click on the project and choose "backup all". This will grab all your projects and put them into 1 file. Then in the newly installed location you can right click in the project window and choose "restore" and load in that backup file.

To backup the proxies, captcha info, etc. you need to click the backup settings button. First you click the big options button. Then look right under the advanced tab. (bottom left corner of window).

 

[seowarrior008]

hi,
I am wondering how you guys import manually built tier1 links(for example, some web2 links) into GSA? then using GSA to set up a tier2 project pointing to those manual links??

Anyone willing to share how to do this?

thanks a lot in advance))

 

[manny2513]

All I have to say that this is hands down the best SEO software in the market period.

I am raking solid 5th position for a keyword that Keyword Canine ranks its difficulty level as "fierce"

I have not done nothing but just run tier 1 links to the site only using GSA SER (the site is less than one year old)

Yes that is right just pure PR1 and above tier 1 links to my site and I went from being not indexed for the keyword to a solid 5th position (I have being there for over 3 weeks now) in less than 3 months running the Software 24/7.

Nope I do not do tier 2, 3, 4 or 5 just tier 1 let it run not worry about it.

I do have a list of 156k keywords feed into the tool and high quality content not spun unreadable crap.

Thanks a lot to Sven for developing such great software.

 

[MikeBuyco]

hi,
I am wondering how you guys import manually built tier1 links(for example, some web2 links) into GSA? then using GSA to set up a tier2 project pointing to those manual links??

Anyone willing to share how to do this?

thanks a lot in advance))

Save first your tier 1 links in a notepad. Create a new project, in the URL section click Edit and Import URL text and look for where you saved your tier 1 links. Or you can copy the links and import from clipboard.

 

[petrovski]

Quick question which tool do you think best compliments GSA Search Engine Ranker, looking at it from an overall SEO perspective?

 

[warner410]

high quality content not spun unreadable crap.

You submit unique content to each site?

 

[WayneInc]

hai i want to purchase the Working List of Link so any one selling ..

Thanks

 

[-FPC-]

No problem. But just so anyone else doesn't think there is actually something wrong with the social bookmarks or microblogs, here's a quick test I ran for about 45 minutes. 1200 verified Social Bookmarks and Microblogs. It works great.

Yep you just install the software on the other machine and enter the key. Make sure and don't run it on more then 1 machine at a time.

To backup the projects you can right click on the project and choose "backup all". This will grab all your projects and put them into 1 file. Then in the newly installed location you can right click in the project window and choose "restore" and load in that backup file.

To backup the proxies, captcha info, etc. you need to click the backup settings button. First you click the big options button. Then look right under the advanced tab. (bottom left corner of window).

Okay so why exactly did I get nothing successful when doing it with a VPN and manual captcha? I find that quite surprising.

 

[seowarrior008]

Save first your tier 1 links in a notepad. Create a new project, in the URL section click Edit and Import URL text and look for where you saved your tier 1 links. Or you can copy the links and import from clipboard.

Hi, thanks for reply!

I put multi urls in this way:

url1#{anchor1|anchor2|anchor3}|url2#{anchor4|anchor5|anchor6}

and I inserted anchor into article:

<a href="%url%">%anchor_text%</a>

While I press test, it showed correctly.

However, while I checked the verified links, the actual published just output like this:

anchor text looks like this

anchor|url

where did I do wrong？？ how to remove |url, but only correct anchor left??

I tested it before submission, nothing wrong, but what actually output just not correct!

Hope anyone could give some hints!

THanks a lot )

 

[seowarrior008]

Anyone knows what the correct format for importing multiple urls appending with multiple anchor text for each url??

I want to put these in a notepad file, then import, but tried a few times, always error pop up, or show blank in field

Anyone can help? thanks a lot

 

[MikeBuyco]

Hi, thanks for reply!

I put multi urls in this way:

url1#{anchor1|anchor2|anchor3}|url2#{anchor4|anchor5|anchor6}

and I inserted anchor into article:

<a href="%url%">%anchor_text%</a>

While I press test, it showed correctly.

However, while I checked the verified links, the actual published just output like this:

anchor text looks like this

anchor|url

where did I do wrong？？ how to remove |url, but only correct anchor left??

I tested it before submission, nothing wrong, but what actually output just not correct!

Hope anyone could give some hints!

THanks a lot )

I'm not sure about this as I've never done it that way. You could try Edit>Import URL+Primary Anchor+Secondary. So you can put url first then the next 2 anchors. Import again for the next one to use anchor 3 and so forth.

As for the article: <a href="%url%">%anchor_text%</a>

I will leave this answer to s4ntos to answer or you could ask this in the gsa forum.

 

[rAzEc26]

i can't open the program, i'm getting Internal Error #9091

 

[Alonzx]

Hi,

I think there is a bug on version 5.55.
when ever I want to sort my url list into url engine's list, form the option->Advanced->Tools->import URLs
the moment I select a .txt file the program crashes.

Please take a look at this.

 

[SamTheMan26]

Question:

My VPS died yesterday so I am forced to start basically all over again, but this is good as well since it allows to make it right from the start now.
I am just wondering if it makes sense to import all 4 global site lists now or just the identified list.

If I just import the identified list now and let GSA run with that list it will build a new and up to date successful and verified list for me whereas if I import all 4 lists from my old install now I have probably thousands of URLs in the successful and verified list that no longer work today.

And if I understand it correctly every link no matter how you add it (via GSA scraper, custom target list or GSA search engine scraper) is going through the identified list. As soon as GSA recognizes an engine it can post to the URL is added to the identified list and so there cannot be any URLs in the successful and verified list that are not also in the identified list. Please correct me if I am wrong here.

What do you think or what would you suggest to do now? Import just the identified and start again or copy all 4.

PS: By the way, does it even make sense to save the failed list? What happens with URLs in the failed list? Does GSA use this list kind of a like blacklist, so that once a URL is found and this URL is in the failed list it will not do anything with this URL? If not, what is the point or advantage of saving the failed list?

Thanks for your help.

 

[SamTheMan26]

And if you have 5-10 projects that have a PR filter like PR1+ what would be the way to check the PR since GSA does not save the PR in the database yet.
What kind of proxies would you use to check the PR (private or public) and what settings would you use (custom search engine query time) if you would like to use your Proxies as long as possible?

Or to rephrase my questions what is the best way to post only to PR1+ sites from my identified list now without burning through my proxies immediately? I mean obviously there is no point of checking the PR of the URLs in the identified list outside of GSA with scrapebox for example because GSA does not save this data. The only advantage, that it has is that I could complete turn off the PR filter inside GSA because I know only PR1+ sites have been imported.

 

[manny2513]

I received a few PMs from guys wanting me to share my settings.

Well my settings are simple:

I use most engines so I will list the ones that I DO NOT use

1. Exploit
2. Indexer
3. Microblog
4. Pingback
5. Referrer

A list of 156k Keywords going from sorted from most relevant on the top and less relevant on the bottom

Article Builder Content niche relevant (20 articles 1k words spun together)

100 Gmail emails that rotate for account and email confirmation

PR 1 or above only and OBL set to 60 and I also avoid to post on the same domain twice

That's it. I just let it run and not worry about it the software will do its thing.

 

[WayneInc]

hai dude can you pls share us which type of keyword are you using/?

Thanks

I received a few PMs from guys wanting me to share my settings.

Well my settings are simple:

I use most engines so I will list the ones that I DO NOT use

1. Exploit
2. Indexer
3. Microblog
4. Pingback
5. Referrer

A list of 156k Keywords going from sorted from most relevant on the top and less relevant on the bottom

Article Builder Content niche relevant (20 articles 1k words spun together)

100 Gmail emails that rotate for account and email confirmation

PR 1 or above only and OBL set to 60 and I also avoid to post on the same domain twice

That's it. I just let it run and not worry about it the software will do its thing.