Permanently Closed Marketplace Sales Thread

Status
Not open for further replies.
Why the software doesn't have a lower multi-threading option?
 
does it still only support pligg ,when are you adding more platforms its been 3-4 months u said u will be adding new platforms
 
seoparadise, if captcha sniper works like captcha breaker... then make sure you do not have captcha sniper emulating deathbycaptcha in its settings as well. i was making this mistake for quite awhile. =D

the uniches login was on the faq page you were directed to after your purchase.

sr1racer, did you change something to get better dbc results or you just tried at non-overload?
 
Program is working awesome. Thanks Clyde for your quick support and I can't wait to see SEDemon.
 
Hi Clyde. Just updated to the latest version, but the auto spin doesn't seem to be working. Am I doing something wrong?

James :)
 
I was kinda of wondering the same thing. Mine was spinning when I setup a campaign, but when I looked at the posted urls, not only did it not spin, but my links in the articles were gone? I tried it again and same thing, same article, nothing spun, no links in the articles.
 
My success rate this morning after 2 hours was 75 completed. I used tested proxies and death by captcha. Any ideas what's going on?
 
My success rate this morning after 2 hours was 75 completed. I used tested proxies and death by captcha. Any ideas what's going on?

Are you talking about the built in sites? I just ran one and got 398 completed. The #1 killer is proxies, especially if they are semi, because 2 others are sharing them with you and they could have got them temp banned. There are also other things that can lower your success rate, like having short keywords (under 15 characters) because some sites won't approve your bookmark if the title (your keywords) are to short or having your content (bookmark description) to long can also make your bookmark not get approved.

Also, some of the sites have a "1 submission a day" limit, so watch out for that as well. Anyways, I use HMA when I run campaigns, that way there is never an issue and that helps me alot. So, private proxies + HMA + Watch your keyword length (make it 15 characters or more), watch your content length (long description will not be approved), and you should be gold.

Hope that helps!
 
Are you talking about the built in sites? I just ran one and got 398 completed. The #1 killer is proxies, especially if they are semi, because 2 others are sharing them with you and they could have got them temp banned. There are also other things that can lower your success rate, like having short keywords (under 15 characters) because some sites won't approve your bookmark if the title (your keywords) are to short or having your content (bookmark description) to long can also make your bookmark not get approved.

Also, some of the sites have a "1 submission a day" limit, so watch out for that as well. Anyways, I use HMA when I run campaigns, that way there is never an issue and that helps me alot. So, private proxies + HMA + Watch your keyword length (make it 15 characters or more), watch your content length (long description will not be approved), and you should be gold.

Hope that helps!

I loaded it with public proxies yes, but I tested and removed the dead ones, should of got higher then what I did. Should I in future not use proxies and just make sure my my ip has changed? And yes, I used one keyword, 7 characters long.
 
I've got 2 quick presales questions. 1st is a 2 part question hahaha, what captcha do most of these types of sites use and can I use Captcha Breaker? My seconds question... in the demo video you hit autospin button, is that part of the software or is that only with either spinnerchief or bestspinner account? Thanks.

Hi,

We do not support Captcha Breaker directly but it should work based on our users experience. We do however support Captcha Sniper directly. Keep in mind that both of these softwares can't solve REcaptcha type captcha's so your success rate will be affected.

As for the spinner, SpinnerChief provide a free API service so all you need to do is register an account with them through the link in the software.

Clyde,

Thanks for the support. Software is working great. Their was something going on with my Deathbycaptcha account that was causing problems.

Thanks for letting us know! Let me know if you have further questions!

Hello Clyde,

I bought the software 2 days ago and I just made a few tests and the success rate is very low.
Im triyng to send a youtube video.

I use 30 private proxies and deathbycaptcha and i got 823 succes accounts only and when i submit to them i get only 223 links. I made a retry 3 times and nothing.

Also when i use captcha sniper as the first option and deathbycaptcha as the second, all accounts failed. I think is using only the first option (captcha sniper).

Please see the attached file.
Thanks


PD1: Also i emailed to you since i never got my uniches subscription after i bought ultimate niche finder.
PD2: Also tell me how can i add more social bookmarks to the software.

Hi,

I've replied to your email, you should get 600+ successful submissions with the new built-in list updated this week.

I also bought mine two days ago and my success rate is very
low and it does not post out links at all. but i know you will get
problem sorted soon.

I also noticed in the log that some of the errors say

"Email has already been used to sign up on this website" and that is why it failed

I've replied to your email awhile back. Let me know if you need further help.

EDIT: Nevermind.

Why the software doesn't have a lower multi-threading option?

Hi,

It's because it's not necessary, use the 10 threads option, anything lower than that will make the software really slow.

bought it!

Appreciate it!

does it still only support pligg ,when are you adding more platforms its been 3-4 months u said u will be adding new platforms

There's no ETA but we do plan on adding it to both SB Bomber and SE Demon after our SE Demon launch mid-march.

Program is working awesome. Thanks Clyde for your quick support and I can't wait to see SEDemon.

No problem. Thank you! :)

Hi Clyde. Just updated to the latest version, but the auto spin doesn't seem to be working. Am I doing something wrong?

James :)

We didn't change anything with that. Please try again or perhaps contact your spinning service provider.

I was kinda of wondering the same thing. Mine was spinning when I setup a campaign, but when I looked at the posted urls, not only did it not spin, but my links in the articles were gone? I tried it again and same thing, same article, nothing spun, no links in the articles.

SB Bomber does not submit any article, are you talking about a different software? Wiki Bomber?

My success rate this morning after 2 hours was 75 completed. I used tested proxies and death by captcha. Any ideas what's going on?

What he suggested below:

Are you talking about the built in sites? I just ran one and got 398 completed. The #1 killer is proxies, especially if they are semi, because 2 others are sharing them with you and they could have got them temp banned. There are also other things that can lower your success rate, like having short keywords (under 15 characters) because some sites won't approve your bookmark if the title (your keywords) are to short or having your content (bookmark description) to long can also make your bookmark not get approved.

Also, some of the sites have a "1 submission a day" limit, so watch out for that as well. Anyways, I use HMA when I run campaigns, that way there is never an issue and that helps me alot. So, private proxies + HMA + Watch your keyword length (make it 15 characters or more), watch your content length (long description will not be approved), and you should be gold.

Hope that helps!

I loaded it with public proxies yes, but I tested and removed the dead ones, should of got higher then what I did. Should I in future not use proxies and just make sure my my ip has changed? And yes, I used one keyword, 7 characters long.

The short keyword is probably your problem, try the suggestion above and if you don't use proxies, make sure your IP change for every submission.

@everyone else, thanks for all the new orders!
 
It's because it's not necessary, use the 10 threads option, anything lower than that will make the software really slow.

True, but there are still some places in the world where internet speeds are still measured in kbps. ;)

I feel the tool would be more effective for me if I can reduce the number of parallel threads to 3-4.
 
Just wondering. Is it possible to add new sites? Or a new update of SB bomber is the only way to get new list of sites?

Is there a setting on have many times Captcha sniper should be use when failed before moving to death by captcha for example?
 
Last edited:
Clyde there is just one small thing I have noticed, when using private proxies it shows them as bad and not working, regardless to them actually working and being used elsewhere. When using the proxies checker it shows errors and highlights as red. My results are still good and everything, however it's annoying having to keep checking just because they appear as red.

Can you fix that perhaps please?
 
True, but there are still some places in the world where internet speeds are still measured in kbps. ;)

I feel the tool would be more effective for me if I can reduce the number of parallel threads to 3-4.

Noted, we'll see what we can do.

bought last night < just playing with it btw its epic <

Thank you!

Just wondering. Is it possible to add new sites? Or a new update of SB bomber is the only way to get new list of sites?

Is there a setting on have many times Captcha sniper should be use when failed before moving to death by captcha for example?

Hi klauzer,

You can add your own custom list of sites, just uncheck the "Use built-in Pligg list" checkbox at the top left corner, go to the Target URL's tab, and Import .txt. Make sure you put your list of URL's in a .txt file, one URL per line.

As for the Setting, I believe you can do this in Captcha Sniper itself.

Clyde there is just one small thing I have noticed, when using private proxies it shows them as bad and not working, regardless to them actually working and being used elsewhere. When using the proxies checker it shows errors and highlights as red. My results are still good and everything, however it's annoying having to keep checking just because they appear as red.

Can you fix that perhaps please?

Hi Mr Cracker,

This has been fixed in the latest version. :)

Problem was with the site we use to test the proxies (google.com) sometimes the proxies are not Google-enabled.

send a mail on [email protected] and also a private msg, plz chk

Will do if I haven't done so already.

@everybody else, thanks for all the new purchases!
 
Hi Clyde, you said that the proxies problem was fixed, however I'm still having the same problem? My proxies are private and are 100% working, I have tested them out many times. Can you get this fixed because it's beyond annoying.
 
Status
Not open for further replies.
Back
Top