My SEO Blueprint (SENuke, AMR, BMD, Xrumer, Scrapebox)

Status
Not open for further replies.
Cash, appreciate the instruction and example :)

Riposte: I know right LOL - I submitted a 500+ article to Hubpages and they rejected it - I then full revised it and they rejected it again! I was pissed. LOL! They are ridiculous. I don't know what else to do.

Cash any suggestions on this one?

Hubpages is a bitch recently. What kind of article was it? What was the
reason for rejection?
 
Hey Cash

Just wondered if I need BMD to bookmark the first tier or could I use Autopligg to do this aswell as the second tier?

What would you recommend?

Look forward to your response.

Thanks

You can use Autopligg but to me it is kinda spammy. I want to keep first
tier as clean as possible so I use BMD and bookmark to high quality
bookmarking sites only.
 
do you offer any kind of seo services? i'm looking for someone to run my seo campaigns. message me if you do. thanks

Indeed I do. BST is coming later this week plus another 5-10 days for
mods to verify approve the service.
 
Hey mate, I was just wondering how you get 70% unique with The Best Spinner? I've been through an article and manually spun most of the words and I can only get 48%

You can get 70% or more by spinning all the content except keywords
you'd like to preserve. Spin everything.
 
Cash...I was able to spin my article to 90% Unique in TBS. So after spinning your article, how many articles should you generate? TBS allows you to do up 1000 unique articles - but what number should you aim for realistically?

My rule of thumb is new article for every blast. So, each Web 2.0 gets an
unique copy plus 200-400 unique auto approve AMR articles.
 
Cash...when embedding video for the manual submissions - should we be embedding it directly into the article html code? OR should we be using the embed module that comes with the site - for example squidoo has Youtube Module where you paste the video url and it put the video at the bottom of your article. Or is either way fine?

Each Web 2.0 site has its own method. On Squidoo and Hubpages I use
YouTube module. On Wikis there is a way to insert video into post manually.
I don't mess with HTML directly.
 
Cash...so we need both BMD and AutoPligg right? As you state you use BMD for first tier and AutoPligg for second tier.

For us Newbies - Can you please explain which links are considered 1st Tier Links and which are 2nd Tier Links? Or where can we go to learn more? I don't mind reading up.

I'm assuming these kinds of links web 2.0, article links, Pligg, etc are considered 1st or 2nd tier but which kind of links go in which tier so we know which program to use to submit them. Can you write it out for example:

BMD - Submit 1st Tier
- Web 2.0
- Article Links
- blah blah blah

AutoPligg - Submit 2nd Tier
- Pligg Sites
- blah blah blah

Everything above dashed line is tier one, below is tier two.

ad3ac7ee.jpg
 
I picked up autopligg and scraped a bunch of sites but I'm having terrible account creation results, like 98% failure either failure to solve the captcha or account creation failed. Tried with decaptcher, deathbycaptcha, manual solve, private proxies on and off - all seems to give me the same result. I figure I'm overlooking something does anyone have some advice?

Use Autopligg6 and set up email verification. DeathByCaptcha is the best.
Try to reduce the number of threads and increase timeout in settings.

If I get 50% success rate with Autopligg I consider it a good rate.
 
I'm a complete newbie to SEO. 2 weeks ago, I had never even heard of the term SEO, and now here I am at this website I found on google!

Firstly, I wanted to share my perspective as a newbie to congratulate you on what is truly an amazing post - it has drawn obvious interest from experienced members, but is has also been written in such a clear way that someone with absolutely no prior knowledge can easily follow it. I am sure that you will make a ton of cash when you release your white hat version! (I'll be the first to pick it up).

I've got a one year old domain (someone else set it up for me), and a brand new domain. I'm going to focus on manual submissions to web 2.0 as first tier, and then second tier I'll blast articles with AMR. Once I can manage this, I'll focus on getting links indexed with BMD and RSS feeds/submissions. I'll leave Xrumer and Scrapebox until I understand more.

I'm going to spend 1/3 of my time learning (still a lot of basics to catch up on), 1/3 writing articles and 1/3 submitting to sites.

I would appreciate you explaining 2 things, and apologise in advance for not understanding!

1. When I submit to web 2.0 sites (either manually or with SENuke), do I submit a "unique" spun promo article to each site? For example, if I submit to 20 web 2.0 sites, do I submit 20 different spun promo articles (ie 20 different spun articles generated by BestSpinner from the original promo article).

2. When I blast articles with AMR, do I use the same promo article for each submission, or should they have some spinning either with BestSpinner or with the spinner on AMR? It's a lot easier to blast 3000+ sites with just one unspun promo article. I assume that because this is the second tier of links that having original content on each site is not so important.

I really appreciate your effort in posting and am looking forward to learning as much from this forum as possible. :baby09:

1. When you finished spiining your article in TheBestSpinner, generate
unique articles for manual submission. Each Web 2.0 article will be
the different variation of the article you've spun.

2. When you blast with AMR or SENuke, just use the spin syntax. The
software will spin the article for you when you post. So you put
your article to AMR as {word1|word2} and AMR will generate an unique
variation for every site you post to.
 
Trying to get the BMD part of this going.

What do you do about all the sites that require categories?

I used the BMD feature to set default categories for many of the pligg sites but when I tried to bookmark my URL's I get a ton of errors saying that I haven't chose a category.

There is a setting in BMD "post to first available category". Tick it.
 
i have the same issue than you but my page is 10 years old and have no backlinks. i do one cycle for a 1 word keyword (20000 exact matches per month)
after this cycle my site dance on page 12-16 for this keyword.
last week i blast my site with some auto approved blogs but not for my main keyword. i use some various names as anchor. After this blast my site jumps on page 5.
i think this is a google penalty like anchor text penalty.

Here is my take on it. It is about link velocity or whatever it called.

The thing is if you've never built any links and then all over the sudden start
to blast and then stop here is what Google thinks. They think, oh shit a lot
of links quickly means site is hot and popular, let's rank it. Then they see
that the flow of links stopped. They think, OK now it is probably old news,
no one cares about linking to them anymore, let's drop them.

Building links consistently is important.
 
I forgot to mention that I had a go at BMD too and wish I had read recent reviews on the warrior forum. Normally 90% of the time BHW gets it right, but not with BMD. It is so slow it is unusable for backlinking articles and such.

Cash seems not to mind doing the few pretty good bm sites built into the software (with recapcthas), but I won't even bother using it for that.

I installed another programme with semi-success called Social Bookmarks Submitter. You have to install it on the server (and little bit time consuming). It worked with only about 5 or 6 web 2.0s. it couldn't read the meta tags on the rest.

Maybe venom will be able to do better. We shall see.

I keep using BMD because I have it. I bought it ages ago when I was
young and stupid. But it works OK for 100+ sites. It can be replaced with
SENukeX bookmaking module but the speed of submission will be even slower
than with BMD.
 
bstsystems said:
Why does the article need to be all the way up to 70% unique, isn't around 50% enough?

No, it is not. Panda is upon us all :-)
Seriously, you'll get more content indexed if you spin it well.

bstsystems said:
Why do you point the two links in the article to a random page on the money site instead of to the keyword optimised page?

Which article you're reffering to?

Two links in the Web 2.0 article point to the keyword optimised page on the money site.
Links in the AMR articles resource box point to keyword optimised page on the money site
and to the random Web 2.0 property.

bstsystems said:
I know article ranks you can submit an article for $2 right? What's the cheapest way to get into the UAW network?

I don't use UAW network. Only ArticleRanks which is $39/month. If you submit more than one article per day,
it is cheaper than pay as you go $2/submission.

bstsystems said:
In #12 wouldn't you want to also grab the article ranks url's also to bookmark and ping them?

You don't know where ArticleRanks posted your article. You don't get the URL (unless you use Wordpress and
receive a trackback).

bstsystems said:
Why does Linklicious do 301 redirects and why is that bad?

The first question is for Linklicious to answer. I don't know.

The second answer is here:
http://www.seerinteractive.com/blog/301-redirect-test-how-much-link-juice-are-you-losing/2010/04/09/

bstsystems said:
What is the benefit of making an RSS feed of our url's, and why can't we just go to pingdevice c0m and ping all of the urls at once?

Because you are supposed to ping RSS feeds and not URLs. Weblogs Ping API is for feeds, not URLs.

bstsystems said:
#18 Says to blast the rss feed to rss directories. Should we be getting the urls of the blasted rss feed and ping those url's?

I have custom software that creates RSS feeds off URLs and pings them to 100+ ping sites.
So, the answer is yes. But besides pinging I submit feeds to RSS directories (with RSSNuke
module of SENukeX).

bstsystems said:
So in #19 we are only getting 1 url from 1 approved article and submitting that to all thebookmarking sites? Should It be the highest PR site we can find then?

No, the idea is to get at least one bookmark to each article. I replaced this part with Autopligg because
it is faster than BMD.

bstsystems said:
Can I buy your current list of 1000+ bookmarking sites that don't require captcha?

Yes, I sell both my BMD and Autopligg lists. But since I figured out how to use BMD with DeathByCaptcha
for $1.39/1000 CAPTCHAs I don't care much if my list is CAPTCHA free anymore.

bstsystems said:
#21 What do you mean spam the profile url's, spam them with what. I thought we were supposed to be "getting" profile urls, and "spamming them" to our site (if old) or to web 2.0's if new

Get XRumer profile links and spam them with Scrapebox comments. So, Scrapebox comment links go to XRumer
profile links AND to AMR links. I do not, I repeat, I do not recomment spamming your money site directly.
I did it. It works. But you've been warned :-)

bstsystems said:
You wrote ***Open as many accounts as you can on 100+ main BMD sites. The more the better. You submissions will be faster and your accounts stay alive longer.***
Open multiple accounts on each site? Why would our submissions be any faster from doing this or our account staying alive longer?

Create multiple account on each site. The thing is the way BMD generates submission queue. The more accounts
you have, the faster your queue will be generated.
 
The onpage is excellent.I have good quality articles of 500 words each and interlinking the articles and themed structure.I'm more than happy with my on page seo

What did you do exactly off page? How old is a website? Do you build links
consistently or blast hit-and-run style?
 
Do you think there could be a problem if every web2.0 site receives the same Backlinks?

For google it should look very suspicious if you have 20 web2.0 sites and everyone got Backlinks from nearly the same resources.

That's why links from AMR blast and XRumer blast are randomized.
 
very comprehensive. Never thought to randomize my links to my web 2's. Something I will start putting into place straight away!
 
Hubpages is a bitch recently. What kind of article was it? What was the
reason for rejection?

It was about hats and it was a duplicate content rejection - could it be because I had used the article on the SlideShare and Scribd? But I even spun it and they still rejected it again.
 
Status
Not open for further replies.
Back
Top