AC Mass Submitter Official Q&A Help Thread

Danny Relic · #1 (**permalink**) 11-21-2009, 07:14 AM

I've been thinking about doing this for a while now. Many times I get questions in PM or email from users with questions about how to work my AC Mass Submitter software.

If you have questions about installation, trouble-shooting, future updates, suggestions, etc...please post here and I'll do my best to answer your questions.

Hopefully by keeping all the information in one spot, it will help everyone out if they run into a problem.

For those of you who know the ins and outs my software already, feel free to also help out! (Thanks will be given, of course.

)

srb888 · #2 (**permalink**) 11-21-2009, 07:29 AM

Hi Danny, how are you?

I'll post the exact replica of my problem which was mentioned on another thread. Here it is:
"I wonder if ACMS can use my FF + HideMyIP2009 combination like you said. Until now I was using this combo while submitting to AC. If this is is successful, then all your customers will have one of the best solutions at very affordable rate. As ACMS will still not make me feel better by not telling what IP it is using (as of now), I have a suggestion that can help all others... Can you automatically display what 'current' proxy-name (with the port address) is being used somewhere on ACMS? This will help me sleep lot better! "
Reference:
To your advice on the following link:
"The ACMS internet protocol (how it connects to AC, the license verification, etc) is the same as the one used for Internet Explorer, the web browser. If you go into your Internet Options menu on IE and set it to connect via a proxy, you will also be changing anything else that uses IE's protocol. This means, you'll change how ACMS connects to the internet.

So, put a proxy/port into IE, then leave the proxy/port fields blank in the ACMS. It should then connect via a proxy."
Link:

Code:

http://www.blackhatworld.com/blackhat-seo/associated-content-writing-articles/138211-need-advice-proxies-use-dannys-acms.html

Of course, now there is another problem about the new AC regulation, the link is here:

Code:

http://www.blackhatworld.com/blackhat-seo/associated-content-writing-articles/142004-ftc-dec-1-ac-writers.html

Redtide, Millygirl, and Shawndellah have some real concerns about it, and ACMS will need some overhauling to enable posting especially the review postings.

Please do the needful ASAP.

Thanks!

Danny Relic · #3 (**permalink**) 11-21-2009, 07:40 AM

I was going to mention you, srb888, in the original post.

As far as your proxy recommendation goes, it's highly doable, and I'll try to send out an update in the near future with this feature. I also would love to team up with someone who has private proxies (user/pass) to try and figure out a way to use them inside the ACMS.

The updates to the AC submission process seem intriguing and a little scary, but we'll see what happens Dec. 1st. I can't program the ACMS ahead of time, because I don't know how they plan on sending their POST data for submission. If you are posting reviews, and they put you through this little diversion, I may need to make a change to the Formatter as well. All the article information is stored in the files that the Formatter creates, so cross your fingers that that is all that is required.

**redtide1969** · #4 (**permalink**) 11-22-2009, 08:10 AM

Excellent idea to start up a support thread Danny. If you get a chance to update the ACMS for the new FTC guidelines it would be huge for all of us. I'm sure many buyers are submitting 25-50% review pieces to AC. I know they make up the largest percentage if what I'm submitting.

Danny Relic · #5 (**permalink**) 11-30-2009, 02:25 AM

I will put out a major update with the new December software, srb888. Thought you'd like a heads up on when that feature you asked for will be in.

Also, I just spent some time troubleshooting with a new user on installation.

If you are using Windows Vista, and you get an error when trying to register the MSINET.OCX file that looks like this:

The module MSINET.OCX may not compatible with the version of Windows that you're running. Check if the module is compatible with an x86 (32-bit) or x64 (64-bit) version of regsvr32.exe.

The reason is because MSINET.OCX is a 32bit file trying to register on a 64bit system.

Here's how to get it to work.

1. Copy and paste the MSINET.OCX file into your C:/Windows/SysWOW64 directory.
2. Open up a command prompt as an administrator.
3. Type "cd .." This will get you out of the System32 folder and into the Windows folder.
4. Type "cd SysWOW64" This will get you into the SysWOW64 folder.
5. Type "regsvr32 MSINET.OCX" This will register the component.

Special thanks to Brocation for his patience on this.

Brocation · #6 (**permalink**) 11-30-2009, 05:13 AM

No problem, i rather was impress with your speed in solving the issue and responding my e-mail, it hasn't been even 5 hours since i brought your program. A+++ service!

showerhater · #7 (**permalink**) 11-30-2009, 07:54 PM

hi,
i think i am going to buy your article submitter. i have one question though. if i give the author the article formatter will the author see that it is for AC, and then stop working for me and work for themselves. i appologize if this answer is somewhere else. i looked for answer but couldn't find it. i also apologize if i put this post in the wrong thread.

Danny Relic · #8 (**permalink**) 11-30-2009, 08:00 PM

Here's a screenshot of the Article Formatter tool. There is no word of "AssociatedContent" in it:

Hope that answers your question.

**redtide1969** · #9 (**permalink**) 11-30-2009, 08:15 PM

Good stuff Danny...thanks again for the continued updates

Danny Relic · #10 (**permalink**) 11-30-2009, 08:54 PM

You're very welcome.

I'm going to try and finish up my 3rd and final college programming project tonight. That way I can get started on the new December update as soon as AC changes.

Brocation · #11 (**permalink**) 11-30-2009, 10:20 PM

When Ac will change for sure?

Danny Relic · #12 (**permalink**) 11-30-2009, 10:41 PM

They said December 1st.

We'll see what happens.

**redtide1969** · #13 (**permalink**) 11-30-2009, 10:47 PM

The new update is only going to pertain to "review" articles Brocation, and like Danny said, is supposed to happen on Dec. 1st.

Here's more info about the changes..

http://www.blackhatworld.com/blackha...c-writers.html

Brocation · #14 (**permalink**) 12-01-2009, 01:00 AM

Quote:

Originally Posted by redtide1969

The new update is only going to pertain to "review" articles Brocation, and like Danny said, is supposed to happen on Dec. 1st.

Here's more info about the changes..

http://www.blackhatworld.com/blackha...c-writers.html

So that means it we wont get paid to do review articles unless the companies pay us? or AC will pay regardless?

**redtide1969** · #15 (**permalink**) 12-01-2009, 01:30 AM

No, you'll want to read it a little closer. It means that if you're being paid by a product manufacturer to write a review you'll have to indicate that fact. For the purpose of submitting to AC, we'll just be choosing option #1 which in a nutshell means we aren't being paid by the company whos product we're reviewing.

What Danny's working on is an update to the ACMS that will allow us to select that option when the new submission template takes effect on Dec. 1st.

Danny Relic · #16 (**permalink**) 12-01-2009, 04:47 AM

Bingo, Red.

AnThRaXx · #17 (**permalink**) 12-01-2009, 07:16 AM

Danny, I don't know if this has already been mentioned but I think a awesome feature you could add to your software would be a picture field. I don't know if it's helped anyone else but pictures have been really helping my upfronts.

Danny Relic · #18 (**permalink**) 12-01-2009, 08:36 PM

Quote:

Originally Posted by AnThRaXx

Danny, I don't know if this has already been mentioned but I think a awesome feature you could add to your software would be a picture field. I don't know if it's helped anyone else but pictures have been really helping my upfronts.

I'll look into it.

verve22 · #19 (**permalink**) 12-15-2009, 05:07 AM

Hi Danny,

Thanks for starting this thread. I just bought your software yesterday and I've been having some trouble getting it to install properly. Right now I can open the program but when I click start after loading my articles nothing seems to happen.

My guess is because I was never able to use Installation file that something got screwed up. When I try to open the installation file I get this error message "LoadLibrary("MSINET.OCX") failed - The specified module could not be found. Not sure what I'm doing wrong? The MSINET.OCX file is in the main folder along with the rest of the files. Thanks in advance for your help!

I'm using Windows XP Professional SP3 through Parallels Desktop on a Mac.

Verve

Danny Relic · #20 (**permalink**) 12-15-2009, 08:12 PM

@verve22:

I've responded to your email, since BHW wasn't loading for me for some reason.

As a hint to everyone else, it will help speed up the support I can offer you if you download a small tool called TeamViewer. (teamviewer.com)

This is a share your desktop type program that allows us to both access your desktop. I can fix the problems and explain them to you right there on your desktop, and you will retain all overriding power over my actions (it's a safety precaution, of course).

When you have an issue, simply send me a session ID and password that you get from within TeamViewer. Most people's issues take less than 5 minutes to solve. I've helped many, many people already via TeamViewer, and I'm sure they will vouch for it's ease of use and safety.

Thanks,
Danny

verve22 · #21 (**permalink**) 12-16-2009, 04:28 AM

Hey Danny,

Sent you an email with the session ID and password. This team viewer program is awesome! I've never used it before. Thanks very much!

verve

fcdude · #22 (**permalink**) 12-16-2009, 01:08 PM

Hey Danny,

Can you please tell me how many categories we should check off in the formatter?

As well, what should I put in the summary? Specifically, how detailed should it be?

Thank you

uchiha.jain · #23 (**permalink**) 12-25-2009, 06:14 AM

Hey Danny.. I bought the submitter on 21st.. but the license key doesn't seem to work (I'm using Win7 x64 if it makes any difference).. Also I need to go through an HTTP proxy which requires authentication to access internet... would this program be able to work in this case..??

cheers,
Uchiha

I've installed the support software.. looks pretty awesome.

. wish I knew about it earlier.. could have saved me a lot of time.. anyways I'm PMing you the Session ID and password.. I don't know how long would same session be valid but I'll try to remain online the whole day today..

boondoggle · #24 (**permalink**) 01-09-2010, 07:32 AM

Hi,
Ive just bought the mass submitted and have formatted a couple of articles but they aren't appearing in the mass submitter articles box.
Not sure why- any ideas?

Danny Relic · #25 (**permalink**) 01-09-2010, 06:43 PM

Quote:

Originally Posted by boondoggle

Hi,
Ive just bought the mass submitted and have formatted a couple of articles but they aren't appearing in the mass submitter articles box.
Not sure why- any ideas?

PM Sent.

Danny Relic · #26 (**permalink**) 01-09-2010, 06:44 PM

Quote:

Originally Posted by uchiha.jain

Hey Danny.. I bought the submitter on 21st.. but the license key doesn't seem to work (I'm using Win7 x64 if it makes any difference).. Also I need to go through an HTTP proxy which requires authentication to access internet... would this program be able to work in this case..??

cheers,
Uchiha

I've installed the support software.. looks pretty awesome.

. wish I knew about it earlier.. could have saved me a lot of time.. anyways I'm PMing you the Session ID and password.. I don't know how long would same session be valid but I'll try to remain online the whole day today..

After our many conversations, have you gotten the new internet connection to work with the software?

Danny Relic · #27 (**permalink**) 01-09-2010, 06:47 PM

Quote:

Originally Posted by fcdude

Hey Danny,

Can you please tell me how many categories we should check off in the formatter?

As well, what should I put in the summary? Specifically, how detailed should it be?

Thank you

1-3 categories is sufficient. There isn't a need to check more than that. (Plus, if you check too many you'll run into problems with the submission)

The summary is as easy as copy and pasting the first paragraph of the article in to the summary box. Reason being is that a normal article outline looks like this:

1st paragraph: Tell them what your are going to tell them.
2-4th paragraphs: Tell them.
5th paragraph: Tell them what you told them.

Danny Relic · #28 (**permalink**) 01-14-2010, 01:07 AM

Attention ACMS Users and Prospective Users:

There will be a new update coming in the near future.
This update will include:

A Better Configuration File
This means it will save all your previously used data, not just the username/pass.

Handle the Successful/Unsuccessful lists better.
Enough said.

Random Article Tip
This just sounded like fun. It'll display a Random Tip at the top each time you launch AC Mass Submitter. Who knows, maybe you'll learn something. I can also use this as a way to communicate with all of you about future updates, or anything really happening.

Total Article Count
Another little fun thing. ACMS will now display the total number of articles you've ever submitted through it. It's nice to see your benchmark, and not the same number climb of 1 to 10. Hey, it might even motivate you to submit more? I mean come on, my score isn't that hard to beat...

(Would that be fun actually? Have a Top 10 Submitter list? Prizes are likely..)

Better Proxy Support
I'm not going to lie, the proxy support is currently next to impossible. I would like to update it to handle private proxies, like from cloakfish. If anyone has a private proxy already, please let me know. I'd really appreciate it if you could show me exactly how to use one (authenticating, etc..) and let me borrow yours to write the program around. You'll be repaid in kind.

***

There's a few more I've got written down in my notebook, but hey I gotta hold onto them for a little while longer....

Let me know what you think.

P.S. I'm working on a rewriter that will absolutely demolish anything currently on the market. You won't be picking up bits of gold with a shovel, you'll be using a bull dozer if I pull this off.

**redtide1969** · #29 (**permalink**) 01-14-2010, 02:21 AM

It sounds great Danny, definitely looking forward to the updated ACMS.

Needless to say, the rewriting software sounds pretty damn exciting too. You'll be the king if it actually rewrites the way the others can't

Danny Relic · #30 (**permalink**) 01-14-2010, 03:18 AM

Can't say anymore on the rewriter, but yes. It won't just be the AC techniques that get a boost, it'll be all of Internet Marketing.

But hey, just for fun...
...it'll be able to rewrite a 400 word article (roughly 35 sentences) in about 2 minutes.

M'kay, no more.

**redtide1969** · #31 (**permalink**) 01-14-2010, 03:33 AM

That's my point..if it kicks out quality content

Danny Relic · #32 (**permalink**) 01-14-2010, 03:48 AM

PM Sent regarded this.

uchiha.jain · #33 (**permalink**) 01-14-2010, 12:26 PM

Hey danny, just wondering.. why is there no option for choosing the template (General article, Review, Travel Guide etc.) in the submitter? Or does it not matter?

shadowfax · #34 (**permalink**) 01-14-2010, 01:12 PM

Looking forward to your rewriter Danny

Haze_ · #35 (**permalink**) 01-14-2010, 01:28 PM

Interesting, I might look into this software myself. Thanks for the post

Danny Relic · #36 (**permalink**) 01-14-2010, 01:37 PM

Quote:

Originally Posted by uchiha.jain

Hey danny, just wondering.. why is there no option for choosing the template (General article, Review, Travel Guide etc.) in the submitter? Or does it not matter?

At the moment, it submits every article as a General Article. The update will have the ability to choose what kind of article you are submitting.

**johnconnor** · #37 (**permalink**) 01-27-2010, 08:57 PM

I recently purchased the Mass submitter and I have Windows Vista 64bit. I followed the instructions listed above (copying MSINET.OCX into syswow64 etc) but when I want to install the program it tells me that a component is missing. In the original manual there is written that i also need msvbvm60.dll. What should i do with this one? I tried to enter it via cmd into regsvr32.exe filepathto... but this just gives me an error. I also tried to copy and paste it into the syswow64 folder but it tells me that this file is already existing and i checked it and it is already there (so i guess that it already got transferred to the syswow64 folder when i did the first step and transferring the msinet.ocx into the syswow64 folder). Any help would be greatly appreciated (in a n00b-friendly step by step way, as i have no idea about computer processes and stuff) as i really want to use this program. Thanks.

Danny Relic · #38 (**permalink**) 01-28-2010, 03:21 PM

Quote:

Originally Posted by johnconnor

I recently purchased the Mass submitter and I have Windows Vista 64bit. I followed the instructions listed above (copying MSINET.OCX into syswow64 etc) but when I want to install the program it tells me that a component is missing. In the original manual there is written that i also need msvbvm60.dll. What should i do with this one? I tried to enter it via cmd into regsvr32.exe filepathto... but this just gives me an error. I also tried to copy and paste it into the syswow64 folder but it tells me that this file is already existing and i checked it and it is already there (so i guess that it already got transferred to the syswow64 folder when i did the first step and transferring the msinet.ocx into the syswow64 folder). Any help would be greatly appreciated (in a n00b-friendly step by step way, as i have no idea about computer processes and stuff) as i really want to use this program. Thanks.

PMed.

ttraffic · #39 (**permalink**) 01-28-2010, 06:17 PM

I posted in the original thread about my 30 articles that got scrambled...

Are you having any updates to this?

AnThRaXx · #40 (**permalink**) 01-30-2010, 04:44 AM

im having an issue with the summary field.. For some reason it's not converting. I didn't notice until I had 3-4 articles rejected for No summary. I go back and check the txt. file and the summary is there but for some reason didn't process

Any suggestions?

bgallotte · #41 (**permalink**) 02-02-2010, 01:46 PM

I am looking forward to buying the software but I need to know if it works on Windows 7. I have PMed Danny but no reply so far

Does anyone know? Tks

xxjack189 · #42 (**permalink**) 02-02-2010, 09:30 PM

My mass submitter now only works some of the time, it will submit maybe 2 or 3 articles then freeze while submitting the next, then i will have to restart it and the same will happen, any help appreciated.

danizdeman · #43 (**permalink**) 02-04-2010, 09:41 PM

I need help...I pmed you Danny...but got no reply...
I can't get it installed..

The module "MSINET.OCX" failed to load.

danizdeman · #44 (**permalink**) 02-04-2010, 10:02 PM

nevermind...I got it to work.
BUT, the proxy part doesnt work, I tested a proxy in the web browser, and I can log on to AC and everything...
then when I do it in the AC mass submitter,...it doesn't work....
Please fix this ASAP, thanks.

Danny Relic · #45 (**permalink**) 02-06-2010, 07:52 PM

Quote:

Originally Posted by danizdeman

nevermind...I got it to work.
BUT, the proxy part doesnt work, I tested a proxy in the web browser, and I can log on to AC and everything...
then when I do it in the AC mass submitter,...it doesn't work....
Please fix this ASAP, thanks.

Would you mind sending me the proxy you used in a PM or something? I will look into this extensively.

Furthermore, sorry everyone for the late replies. I've PMed most of you back. My computer's power supply was fried and where I live, in a small town, I can't exactly go to the store and buy a new one.